English Datasheet

3-Phase Power Analyzer/Datalogger
Saves data on an SD card in Excel® format
For easy transfer to a PC for analysis
Features:
• Large dot-matrix, sun-readable, numerical, backlit LCD
• Full system analysis with up to 35 parameters
-
V (phase-to-phase), V (phase-to-ground)
A (phase-to-ground)
KW / KVA / KVAR / PF (phase)
KW / KVA / KVAR / PF (system)
KWH / KVAH / KVARH / PFH (system)
Phase angle
Complete with 4 voltage leads with alligator clips, 8 AA batteries, SD memory card,
Universal AC adaptor (100 to 240V), and
case. Clamp probes sold separately.
• Select 200A, 1200A Current Clamps or 3000A Flexible
Current Probes (sold separately)
• Adjustable Current Transformer CT (1 to 600) and
Potential Transformer PT (1 to 1000) ratio for high
power distribution systems
• Log up to 30,000 reading on a removable SD memory card
in Microsoft Excel® format
• Wide sampling rate range (2 seconds to 2 hours)
Clamp Probes (Sold Separately)
• Built-in Clock and Calendar
Choose the best clamp probes to fit your application needs ranging from 200A to 3000A
and flexible vs traditional jaw type.
• Easy-to-use onscreen menu
• Easy-to-hold rugged over molded housing
Backlit LCD displays numerical values. The data can be stored in SD memory card (included)
and then transferred from meter to PC using Excel® software and datalogged readings.
Ordering Information:
PQ3450..........3-Phase Power Analyzer/Datalogger
PQ34-2 ..........200A Current Clamp Probes (set of 3)
PQ34-12 ........1200A Current Clamp Probes (set of 3)
PQ34-30 ........3000A Flexible Current Clamp Probes (set of 3)
PQ1000..........Voltage Test Leads with Alligator Clips (4 leads)
Model PQ34-2
200A Current Clamp
Probes with 0.8" (19mm)
jaw opening
Specifications
AC Voltage (True rms)
AC Current
Active Power (MW)
Apparent Power (MVA)
Reactive Power (MVAR)
Power Factor
Frequency Range
Phase
Current Clamp input
Active Power Energy (MWH)
Apparent Power Energy (MVAH)
Reactive Power Energy (MVARH)
Datalogging
Dimensions
Weight
Model PQ34-12
1200A Current Clamp
Probes with 2” (50mm)
jaw opening
Model PQ34-30
3000A (24”/600mm)
Flexible Current Clamp
Probes for wrapping
around busbars
Range
600.0V
3000A
9.999MW
9.999MVA
9.999MVAR
0.00 to 1.00
45Hz to 65Hz
-180° to +180.0°
200mV, 300mV, 500mV
1V, 2V, 3V; user-selectable
0.0kWh to 9.999MWH
0.0KVAh to 9.999MVAH
0.0kVARh to 9.999MVARH
30,000 readings (2GB SD memory Card)
8.86 x 4.92 x 2.52" (225 x 125 x 64mm)
Meter: 2.2lbs (1010g)
Basic Accuracy
±(0.5%rdg)
±(0.5%rdg)
±(1.0%rdg)
±(1.0%rdg)
±(1.0%rdg)
±0.04
±0.1Hz
±1°
±(0.5%rdg)
±(2.0%rdg)
±(2.0%rdg)
±(2.0%rdg)
Available Kits:
PQ3450-2 ......200A Power Analyzer Kit: PQ3450 with PQ34-2
PQ3450-12 ....1200A Power Analyzer Kit: PQ3450 with PQ34-12
PQ3450-30 ....3000A Power Analyzer Kit: PQ3450 with PQ34-30
www.extech.com
Specifications subject to change without notice.
6/17/14 - R1
Copyright © 2009-2014 FLIR Systems, Inc. All rights reserved including the right of reproduction in whole or in part in any form.
Similar pages