ROHM 1SS390_2

1SS390
Diodes
Band switching diode
1SS390
zApplication
High frequency switching
zDimensions (Unit : mm)
zLead size figure (Unit : mm)
0.8
0.12±0.05
0.6
0.8±0.05
1.6±0.1
1.2±0.05
1.7
zFeatures
1) Ultra small mold type. (EMD2)
2) High reliability
EMD2
zConstruction
Silicon epitaxial planer
zStructure
0.3±0.05
0.6±0.1
JEDEC :SOD-523
ROHM : EMD2
JEITA : SC-79
zTaping dimensions (Unit : mm)
0.2±0.05
φ1.5±0.05
2.0±0.05
φ0.5
0.95±0.06
0
空ポケット
zAbsolute maximum ratings (Ta=25°C)
Parameter
Symbol
IF
Forward current
VR
Forward voltage
Junction temperature
Tj
Storage temperature
Tstg
8.0±0.15
0.2
2.0±0.05
4.0±0.1
Limits
100
35
125
-55 to +125
1.26±0.05
0
0.6
1.3±0.06
0
2.45±0.1
3.5±0.05
1.75±0.1
4.0±0.1
0.76±0.05
Unit
mA
V
℃
℃
zElectrical characteristics (Ta=25°C)
Parameter
Forward voltage
Reverse current
Capacitance between terminals
Forward operating resistance
Symbol
VF
IR
Ct
Min.
-
Typ.
-
Max.
1.0
10
1.2
Unit
V
nA
pF
rf
-
-
0.9
Ω
Conditions
IF=10mA
VR=25V
VR=6V , f=1MHz
IF=2mA , f=100MHz , RL=100Ω
Rev.C
1/3
1SS390
Diodes
zElectrical characteristic curves (Ta=25°C)
Ta=125℃
Ta=75℃
1
Ta=25℃
Ta=-25℃
0.1
Ta=75℃
1
0.1
Ta=25℃
0.01
Ta=-25℃
0.001
1
0.1
0.0001
0
1.1 1.2
5
10
15
20
25
30
0
35
0.2
REVERSE CURRENT:IR(nA)
840
830
AVE:840.2mV
820
0.16
0.9
0.14
0.12
0.1
0.08
AVE:0.0145nA
0.06
0.04
0.8
0.7
0.4
0.3
0.2
0.1
0
VF DISPERSION MAP
AVE:0.849pF
Ct DISPERSION MAP
IR DISPERSION MAP
100
15
8.3ms
10
AVE:4.95A
5
0
100
PEAK SURGE
FORWARD CURRENT:IFSM(A)
PEAK SURGE
FORWARD CURRENT:IFSM(A)
1cyc
Ifsm
10
1
Ifsm
8.3ms 8.3ms
1cyc
0.1
1000
10
1
Ifsm
10
NUMBER OF CYCLES
IFSM-CYCLE CHARACTERISTICS
100
0.1
1
10
TIME:t(ms)
IFSM-t CHARACTERISTICS
IF=10mA
10
1ms
Sin(θ=180) D=1/2
AVERAGE RECTIFIDE
FORWARD CURRENT:Io(A)
Mounted on epoxy board
IM=1mA
FORWARD POWER
DISSIPATION:Pf(W)
Rth(j-c)
DC
0.15
DC
0.1
D=1/2
0.1
Sin(θ=180)
0A
0V
0.05
time
300us
1
0.001
0
0.01
0.1
1
10
100
TIME:t(s)
Rth-t CHARACTERISTICS
1000
100
0.2
0.2
Rth(j-a)
100
t
0.1
1
IFSM DISPERSION MAP
Ta=25℃
VR=6V
f=1MHz
n=10pcs
0.5
0
20
30
0.6
0.02
810
20
1
Ta=25℃
VR=25V
n=30pcs
0.18
CAPACITANCE BETWEEN
TERMINALS:Ct(pF)
Ta=25
IF=100mA
n=30pcs
850
10
REVERSE VOLTAGE:VR(V)
VR-Ct CHARACTERISTICS
REVERSE VOLTAGE:VR(V)
VR-IR CHARACTERISTICS
860
PEAK SURGE
FORWARD CURRENT:IFSM(A)
CAPACITANCE BETWEEN
TERMINALS:Ct(pF)
10
0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
FORWARD VOLTAGE:VF(V)
VF-IF CHARACTERISTICS
TRANSIENT
THAERMAL IMPEDANCE:Rth (℃/W)
f=1MHz
10
REVERSE CURRENT:IR(nA)
FORWARD CURRENT:IF(mA)
Ta=125℃
0.01
FORWARD VOLTAGE:VF(mV)
10
100
100
0
0.05
0.1
0.15
AVERAGE RECTIFIED
FORWARD CURRENT:Io(A)
Io-Pf CHARACTERISTICS
0.2
0
0
Io
VR
D=t/T
VR=40V
T Tj=125℃
25
50
75
100
AMBIENT TEMPERATURE:Ta(℃)
Derating Curve(Io-Ta)
t
Rev.C
125
2/3
1SS390
Diodes
10
0.2
ELECTROSTATIC
DDISCHARGE TEST ESD(KV)
AVERAGE RECTIFIDE
FORWARD CURRENT:Io(A)
DC
0.15
D=1/2
Sin(θ=180)
0.1
0A
0V
0.05
Io
t
T
0
0
VR
D=t/T
VR=40V
Tj=125℃
25
50
75
100
CASE TEMPARATURE:Tc(℃)
Derating Curve゙(Io-Tc)
8
4
AVE:0.96kV
2
0
125
AVE:5.45kV
6
C=200pF
R=0Ω
C=100pF
R=1.5kΩ
ESD DISPERSION MAP
Rev.C
3/3
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level
of reliability and the malfunction of which would directly endanger human life (such as medical
instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers
and other safety devices), please be sure to consult with our sales representative in advance.
It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance
of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow
for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in
order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM
cannot be held responsible for any damages arising from the use of the products under conditions out of the
range of the specifications or due to non-compliance with the NOTES specified in this catalog.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact your nearest sales office.
ROHM Customer Support System
www.rohm.com
Copyright © 2007 ROHM CO.,LTD.
THE AMERICAS / EUPOPE / ASIA / JAPAN
Contact us : [email protected] rohm.co. jp
21, Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan
TEL : +81-75-311-2121
FAX : +81-75-315-0172
Appendix1-Rev2.0