English Datasheet

Pinless Moisture Psychrometer + IR Thermometer
8-in-1 Meter with Memory and Built-in IR Thermometer
Monitor moisture in wood and other building materials with virtually no surface damage with the Pinless Moisture sensor
(Pin-type Moisture Probe included). Stores up to 20 labeled readings for further analysis. Measure Humidity and Air
Temperature with built-in probe plus non-contact InfraRed Temperature design.
• Quickly indicates the moisture content of
materials with Pinless technology without
damaging the surface; Remote Pin-type
probe (MO-P1 included) allows for contact
moisture readings (3ft/0.9m cable length)
•Manually store/recall up to 20 labeled
• Works on multiple wood types and other
building materials
• Easy to read, large dual display with
automatic backlight feature
• Designed with an IR circuit to measure
non-contact surface temperature; 8:1
distance to spot ratio with 0.95 fixed
• Built-in Humidity/Temperature probe
measures Relative Humidity, Air Temperature
plus Grains Per Pound (GPP)/(g/kg), Dew
Point (DP), Vapor Pressure, and condensation
• Automatic calculation of differential
Temperature (IR - DP) to determine
condensation point
• Simultaneously displays moisture value
of wood or material being tested, Air
Temperature, IR Temperature, or Humidity
• Fast Analog Bargraph
• Pinless measurement depth to 0.75" (19mm)
below the surface
• Auto power off and low battery indication
• Programmable high/low Moisture and
Humidity alarms
Measure moisture of wall
material with non-invasive
Pinless technology
• Min/Max and Data Hold
• Complete with pin moisture probe with cable,
9V battery and case
Pin Moisture Probe included for
making contact moisture
Built-in IR thermometer design
locates cold spots on walls, which
identifies surfaces subject to
condensation (direct differential
display of IR - DP)
Ordering Information:
Sensor Type
Pinless Moisture
Pinless Depth
Pin-type Moisture (probe included)
Max Resolution
Temperature (Air)
Temperature (IR)
Vapor Pressure
Dew Point
Mixing ratio
Field of View
Manually Store/Recall 20 data readings
6 to 99.9 (Relative)
up to 0.75" (19mm)
0 to 99.9%
0.1, 0.1°F/°C
0 to 100%RH
-20 to 170°F (-29 to 77°C)
-4 to 392°F (-20 to 200°C)
0 to 20.0kPA
-22 to 199°F (-30 to 100°C)
0 to 999GPP (0 to 160g/kg)
8:1 Distance to Target ratio
0.95 fixed
6.5x2.8x1.5” (165x70x38)
7.4oz (210g)
MO295 ................Pinless Moisture Psychrometer w/Memory + IR Thermometer
MO295-NISTL* ..MO295 with NIST Certificate
MO290-P ............Replacement Pin Moisture Probe
*NISTL is a Limited NIST: Product is certified to 33% & 75% Humidity and 77°F &150°F IR Temperature
Specifications subject to change without notice.
Copyright © 2009-2014 FLIR Systems, Inc. All rights reserved including the right of reproduction in whole or in part in any form.
6/4/14 - R1
Similar pages