English Datasheet

Pinless Moisture Psychrometer + IR Thermometer
Bluetooth Transmitter with MeterLink™
Wirelessly transmits moisture and humidity data to your FLIR high-definition
infrared camera to incorporate meter readings with thermal images.
METERLiNK frees the Thermographer
from the manual process of
collecting field data
• Quickly indicates the moisture content of multiple
wood types and other building materials with
Pinless technology without damaging the surface;
Remote Pin-type probe (MO290-P included) allows
for contact moisture readings (3ft/0.9m cable length)
• Wireless communication with FLIR Thermal Imaging
Cameras (b60, i60, B-Series, and T-Series)
• Manually store/recall up to 20 labeled readings
Infrared cameras quickly locate moisture
related problems
• Easy to read, large dual display with automatic
backlight feature and Fast Analog Bargraph
• Simultaneously displays moisture value of wood
or material being tested, Air Temperature, IR
Temperature, or Humidity
• Pinless measurement depth to 0.75" (19mm)
below the surface
• Programmable high/low Moisture/Humidity alarms
Collecting moisture readings on damaged
surfaces and associating them with regions
on an infrared image can be a complicated
and cumbersome process
• Designed with an IR circuit to measure
non-contact surface temperature
• Built-in Humidity/Temperature probe measures
Relative Humidity, Air Temperature plus Grains Per
Pound (GPP)/(g/kg), Dew Point (DP), Vapor
Pressure, and condensation point
• Automatic calculation of differential Temperature
(IR - DP) to determine condensation point
Manual data collection is time-consuming
and prone to errors. METERLiNK eliminates
this problem by allowing the thermographer
to quickly take moisture readings on a
damaged surface and associate those
readings with the corresponding targets
stored in an infrared image
• Min/Max, Data Hold, and Auto power off
• Complete with pin moisture probe with cable,
9V battery and pouch case
Measure moisture of wall
material with non-invasive
Pinless technology
Pin Moisture Probe included
for making contact moisture
Built-in IR thermometer design
locates cold spots on walls,
which identifies surfaces
subject to condensation (direct
differential display of IR - DP)
Ordering Information:
MO297 ................Pinless Moisture Psychrometer w/Memory + IR Thermometer
MO290-P ............Replacement Pin Moisture Probe
Pinless Moisture (Non-Penetrating)
Pin-type Moisture (probe included)
Max Resolution
Temperature (Air)
Temperature (IR)
Vapor Pressure
Dew Point
Mixing ratio
Field of View
Manually Store/Recall 20 data readings
0 to 99.9 (Relative); Depth up tp 0.75" (19mm)
6 to 99.9%
0.1, 0.1°F/°C
0 to 100%RH
-20 to 170°F (-29 to 77°C)
-4 to 392°F (-20 to 200°C)
0 to 20.0kPA
-22 to 199°F (-30 to 100°C)
0 to 999GPP (0 to 160g/kg)
8:1 Distance to Target ratio
0.95 fixed
6.5x2.8x1.5" (165x70x38)/7.4oz (210g)
*NISTL is a Limited NIST: Product is certified to 33% & 75% Humidity and 77°F &150°F IR Temperature
6/4/14 - R1
Specifications subject to change without notice.
Copyright © 2011-2014 FLIR Systems, Inc. All rights reserved including the right of reproduction in whole or in part in any form.