RSA12M Diodes ESD Protection Device (TVS) RSA12M zApplications ESD Protection zDimensions (Unit : mm) zLand size figure (Unit : mm) 㪇㪅㪈㫧㪇㪅㪈 䇭䇭䇭㩷㪇㪅㪇㪌 㪈㪅㪉 㪊㪅㪇㪌 㪊㪅㪌㫧㪇㪅㪉 㽲 zFeatures 1) Small power mold type. (PMDU) 2) High reliability 㪉㪅㪍㫧㪇㪅㪈 㪇㪅㪏㪌 㪈㪅㪍㫧㪇㪅㪈 㪧㪤㪛㪬 zConstruction 㪇㪅㪐㫧㪇㪅㪈 Silicon epitaxial planar 㪇㪅㪏㫧㪇㪅㪈 ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !㪩㪦㪟㪤㩷㪑㩷㪧㪤㪛㪬 ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! zStructure 㪡㪜㪛㪜㪚㩷㪑㪪㪦㪛㪄㪈㪉㪊 ! ! ! ! 㪤㪸㫅㫌㪽㪸㪺㫋㫌㫉㪼㩷㪛㪸㫋㪼 zTaping dimensions (Unit : mm) 㪋㪅㪇㫧㪇㪅㪈 㪈㪅㪏㪈㫧㪇㪅㪈 zAbsolute maximum ratings (Ta=25qC) Parameter Symbol Peak pulse power(tp=10×1000us) Ppk Stand off power VRMN Junction temperature Tj Storage temperature Tstg 㪏㪅㪇㫧㪇㪅㪉 㱢㪈㪅㪇㫧㪇㪅㪈 Limits 200 12 150 -55 to +150 㪊㪅㪎㪈㫧㪇㪅㪈 㪇㪅㪉㪌㫧㪇㪅㪇㪌 㪈㪅㪎㪌㫧㪇㪅㪈 㱢㪈㪅㪌㪌㫧㪇㪅㪇㪌 㪉㪅㪇㫧㪇㪅㪇㪌 㪊㪅㪌㫧㪇㪅㪇㪌 㪋㪅㪇㫧㪇㪅㪈 㪈㪅㪌㪤㪘㪯 Unit W V 㷄 㷄 zElectrical characteristic (Ta=25qC) Parameter Breakdown voltage Clamping voltage Reverse current Symbol VBR VC Min. 13.3 - Typ. - Max. 14.7 19.9 Unit V V IR - - 2.5 uA Conditions IR=1.0mA Ipp=10.1A VRMN=12.0V 1/2 RSA12M Diodes zElectrical characteristic curves 㪇㪅㪈 㪫㪸㪔㪄㪉㪌㷄 㪇㪅㪇㪈 㪫㪸㪔㪈㪉㪌㷄 㪽㪔㪈㪤㪟㫑 㪫㪸㪔㪎㪌㷄 㪫㪸㪔㪉㪌㷄 㪈㪇 㪚㪘㪧㪘㪚㪠㪫㪘㪥㪚㪜㩷㪙㪜㪫㪮㪜㪜㪥 㪫㪜㪩㪤㪠㪥㪘㪣㪪㪑㪚㫋㩿㫅㪝㪀 㪫㪸㪔㪉㪌㷄 㪩㪜㪭㪜㪩㪪㪜㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪩㩷㩿㫅㪘㪀 㪈 㪈㪇 㪫㪸㪔㪈㪉㪌㷄 㪫㪸㪔㪈㪌㪇㷄 㪫㪸㪔㪎㪌㷄 㪱㪜㪥㪜㪩㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㫑㩿㫄㪘㪀 㪫㪸㪔㪈㪌㪇㷄 㪈㪇㪇 㪈㪇 㪈 㪇㪅㪈 㪫㪸㪔㪄㪉㪌㷄 㪇㪅㪇㪇㪈 㪇㪅㪇㪈 㪈 㪉㪌 㪉㪍 㪉㪎 㪉㪏 㪉㪐 㪊㪇 㪊㪈 㪊㪉 㪊㪊 㪊㪋 㪇 㪍 㪏 㪈㪇 㪇 㪈㪉 㪈㪋 㪘㪭㪜㪑㪈㪊㪅㪐㪎㪭 㪈㪍 㪈㪋 㪈㪉 㪈㪇 㪏 㪋 㪍 㪏 㪈㪇 㪈㪉 㪘㪭㪜㪑㪈㪈㪅㪐㪎㫅㪘 㪍 㪋 㪇㪅㪌 㪚㪘㪧㪘㪚㪠㪫㪘㪥㪚㪜 㪙㪜㪫㪮㪜㪜㪥㪫㪜㪩㪤㪠㪥㪘㪣㪪㪑㪚㫋㩿㫅㪝㪀 㪈㪌 㪫㪸㪔㪉㪌㷄 㪭㪩㪔㪈㪉㪭 㫅㪔㪊㪇㫇㪺㫊 㪈㪏 㪩㪜㪭㪜㪩㪪㪜㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪩㩿㫅㪘㪀 㪫㪸㪔㪉㪌㷄 㪠㪱㪔㪈㫄㪘 㫅㪔㪊㪇㫇㪺㫊 㪉 㪩㪜㪭㪜㪩㪪㪜㩷㪭㪦㪣㪫㪘㪞㪜㪑㪭㪩㩿㪭㪀 㪭㪩㪄㪚㫋㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪉㪇 㪈㪍 㪫㪸㪔㪉㪌㷄 㪽㪔㪈㪤㪟㫑 㪭㪩㪔㪇㪭 㫅㪔㪈㪇㫇㪺㫊 㪇㪅㪋 㪇㪅㪊 㪇㪅㪉 㪘㪭㪜㪑㪇㪅㪊㪇㪏㫅㪝 㪇㪅㪈 㪉 㪈㪉 㪇 㪇 㪠㪩㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 㪭㫑㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 㪚㫋㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 㪤㫆㫌㫅㫋㪼㪻㩷㫆㫅㩷㪼㫇㫆㫏㫐㩷㪹㫆㪸㫉㪻 㪠㪤㪔㪈㪇㫄㪘 㪈㫄㫊 㪈㪇㪇 㪠㪝㪔㪇㪅㪌㪘 㪊㪇 㪊㪇㪇㫌㫊 㪩㫋㪿㩿㫁㪄㪺㪀 㪈㪇 㪈 㪇㪅㪈 㪇㪅㪇㪇㪈 㪥㫆㩷㪹㫉㪼㪸㫂㩷㪸㫋㩷㪊㪇㫂㪭 㪩㫋㪿㩿㫁㪄㪸㪀 㫋㫀㫄㪼 㪥㫆㩷㪹㫉㪼㪸㫂㩷㪸㫋㩷㪊㪇㫂㪭 㪉㪌 㪜㪣㪜㪚㪫㪩㪦㪪㪫㪘㪫㪠㪚 㪛㪠㪪㪚㪟㪘㪩㪞㪜㩷㪫㪜㪪㪫㩷㪜㪪㪛㩿㪢㪭㪀 㪈㪇㪇㪇 㪫㪩㪘㪥㪪㪠㪜㪥㪫 㪫㪟㪘㪜㪩㪤㪘㪣㩷㪠㪤㪧㪜㪛㪘㪥㪚㪜㪑㪩㫋㪿㩷㩿㷄㪆㪮㪀 㪱㪜㪥㪜㪩㩷㪭㪦㪣㪫㪘㪞㪜㪑㪭㫑㩿䌖㪀 㪋 㪩㪜㪭㪜㪩㪪㪜㩷㪭㪦㪣㪫㪘㪞㪜䋺㪭㪩㩿㪭㪀 㪭㪩㪄㪠㪩㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪱㪜㪥㪜㪩㩷㪭㪦㪣㪫㪘㪞㪜㪑㪭㫑㩿㪭㪀 㪭㫑㪄㪠㫑㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪈㪊 㪉 㪉㪇 㪈㪌 㪈㪇 㪌 㪇 㪇㪅㪈 㪈㪇 㪫㪠㪤㪜㪑㫋㩿㫊㪀 㪩㫋㪿㪄㫋㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪈㪇㪇㪇 㪚㪔㪉㪇㪇㫇㪝 㪩㪔㪇㱅 㪚㪔㪈㪇㪇㫇㪝 㪩㪔㪈㪅㪌㫂㱅 㪜㪪㪛㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright © 2007 ROHM CO.,LTD. THE AMERICAS / EUPOPE / ASIA / JAPAN Contact us : webmaster@ rohm.co. jp 21, Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix1-Rev2.0