RF EMF Strength Meter High Frequency measurement for EMF Monitor high frequency radiation in the 50MHz to 3.5GHz frequency range Features: • For electromagnetic field strength measurement including mobile phones, cell phones, base stations, and microwave leakage • Measurement optimized for 900MHz, 1800MHz and 2.7GHz • Non-directional (isotropic) measurement with three-channel (triaxial) measurement probe • Max Hold and Average functions • Manual store/recall up to 99 sets • Level exceed audible alarm with user selectable threshold • Complete with 9V battery and carrying case Applications • RF electromagnetic wave field strength measurements • Mobil phone base station antenna radiation power density measurement • Radiation safety level tests • Locating RF "Hot Spots" in the workplace or at home • Microwave oven leakage tests • RF "Electrosmog" detection • Wireless network (Wi-Fi) RF detection Specifications Sensor Type Frequency Range Units of Measure Measuring Ranges Resolution Audible Alarm Memory Dimensions Weight Electric Field 50MHz to 3.5GHz (Measurement optimized for 900MHz, 1800MHz and 2.7GHz) mV/m, V/m, μA/m, mA/m, μW/m2, mW/m2, W/m2, μW/cm2, mW/cm2 20mV/m to 108.0V/m 53μA/m to 286.4mA/m 1μW/m2 to 30.93W/m2 0μW/cm2 to 3.093mW/cm2 0.1mVm, 0.1mA/m, 0.1mW/m2, 0.001mW/cm2 Adjustable threshold with On/Off Manual store/recall of 99 sets 9.3 x 2.4 x 2.4" (237 x 60 x 60mm) 7oz (200g) Ordering Information: 480836 ..........RF Electromagnetic Field Strength Meter www.extech.com Specifications subject to change without notice. 2/24/11 - R1 Copyright © 2007-2011 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.