PF1 thru PF7 Surface Mount Glass Passivated Fast Recovery Rectifier Reverse Voltage 50~1000V Forward Current 1A Features • • • • • • • Glass passivated fast recovery rectifiers Heatsink structure Low profile, typical thickness 0.8mm Low forward voltage drop Low leakage current Moisture sensitivity: level 1, per J-STD-020 Solder dip 260 °C, 10 s iSGA (SOD-123HS) Typical Applications For use of general purpose rectification in lighting, cellular phone, portable device, power supplies, and other consumer applications. Maximum Ratings (TA = 25 °C unless otherwise noted) Parameter Symbol PF1 PF2 PF3 PF4 PF5 PF6 PF7 Unit Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current VRRM VRMS VDC IF(AV) 50 100 200 400 600 800 1000 V 35 70 140 280 420 560 700 V 50 100 200 400 1.0 600 800 1000 V Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 30 A I2t 3.8 A2sec TJ, TSTG - 55 to + 150 °C Rating for fusing(t＜8.3ms) Operating junction and storage temperature range A Electrical Characteristics (TA = 25 °C unless otherwise noted) Parameter Symbol Test Conditions Minimum Breakdown voltage Ta=25℃,IR=100uA Maximum instantaneous forward voltage IF=1 A,Ta=25℃ IF=1 A,Ta=125℃ Maximum DC reverse current TA=25℃ at rated DC blocking voltage TA=125℃ IF=0.5A,IR=1.0A, Maximum reverse recovery time Irr=0.25A Typical junction capacitance 4.0 V, 1 MHz Typical thermal resistance1) VBR PF1 PF2 PF3 400 PF5 600 PF6 PF7 Unit 1000 1.3 VF V 0.98 5.0 IR trr PF4 µA 50 150 250 CJ 7.5 junction to ambient RθJA TBD juntion to case RθJC TBD juntion to lead RθJL TBD nS pF ℃/W Note:1),The thermal resistance from junction to ambient,case or lead,mounted on FR-4 P.C.B www.goodark.com 1/4 2016.03-Rev.A PF1 thru PF7 Surface Mount Glass Passivated Fast Recovery Rectifier Reverse Voltage 50~1000V Forward Current 1A Ratings and Characteristics Curves 40 Peak Forward Surge Current （A） Average Forward Rectified Current, （A） (TA = 25℃ unless otherwise noted) 1.2 1 0.8 20 0.6 0.4 10 0.2 0 0 1000 25℃ 85℃ 125℃ 150℃ 100 10 1 10 100 Number of Cycles at 60Hz Figure 2.Maximum Non-Repetitive Peak Forward Surge Current Instantaneous Forward Current (A) 10000 0 1 25 50 75 100 125 150 Lead temperature（℃） Figure 1.Forward Current Derating Curve Instantaneous Reverse Current (uA) Ta=25℃ 8.3ms single half sine-wave 30 10 25℃ 85℃ 1 125℃ 150℃ 0.1 0.1 0.01 0.01 0.001 0 20 40 60 0 0.3 0.6 0.9 1.2 1.5 1.8 Instantaneous Forward Voltage (V) 80 100 120 Percent of Rated Peak Reverse Voltage (%) Figure 4. Typical Instantaneous Forward Characteristics Figure 3. Typical Reverse Characteristics Junction Capacitance (pF) 100 Tj=25℃ f=1.0MHZ Vsig=50mVp-p 10 1 0.1 1 Reverse Voltage (V) 10 Figure 5. Typical Junction Capacitance www.goodark.com 2/4 2016.03-Rev.A PF1 thru PF7 Surface Mount Glass Passivated Fast Recovery Rectifier Reverse Voltage 50~1000V Forward Current 1A Package Outline Dimensions iSGA Package Unit:mm MIN MAX A 0.75 0.90 B 0.85 1.05 B1 0.85 1.05 C 0.1 0.25 D 1.9 2.1 E 2.9 3.1 L1 2.0 2.45 L2 0.4 0.85 L3 1.3 1.7 HE 3.5 3.9 Soldering footprint Packing Information Packing quantities: Reel size 7" Quantity/reel 3K Quantity/inner Box 30K Quantity/Carton 120K Packing Tape Specification www.goodark.com 3/4 2016.03-Rev.A PF1 thru PF7 Surface Mount Glass Passivated Fast Recovery Rectifier Reverse Voltage 50~1000V Forward Current 1A Disclaimers These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-Ark product best suited to the customer’s application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Suzhou GoodArk Electronics Co., Ltd.or a third party. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any third-party’s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including our website home page. (http://www.goodark.com) When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce in whole or in part these materials. Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2016.03-Rev.A