SGP1R thru SGP7R Surface Mount Glass Passivated Fast Recovery Rectifier Reverse Voltage 50~1000V Forward Current 1A Features • • • • • • • Low forward voltage drop Low leakage current Glass p passivated Fast Recoveryy rectifiers Low profile - typical height of 1.0 mm Moisture sensitivity: level 1, per J-STD-020 High temperature soldering guaranteed: 260℃/10 seconds Halogen-free according to IEC 61249-2-21 definition eSGP(SOD‐323F) Typical Applications For use of general purpose rectification in lighting, cellular phone, portable device, power supplies and other consumer applications. Maximum Ratings (TA = 25 °C unless otherwise noted) Parameter Symbol SGP1R SGP2R SGP3R SGP4R SGP5R SGP6R SGP7R Unit Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V Maximum DC blocking voltage Maximum average forward rectified current IF(AV) 1.0 A Peak forward surge current 8.3 ms single half sine-wave sine wave superimposed on rated load IFSM 25 A Operating junction and storage temperature range TJ, TSTG - 55 to + 150 °C Electrical Characteristics Parameter Test Conditions Symbol Maximum instantaneous 1A forward voltage Maximum DC reverse current TA=25℃ TA=125℃ 0.5A,IR=1.0A, 1.0A, Typical reverse recovery IF=0.5A,I time Irr=0.25A Typical junction capacitance Typical thermal resistance1) (TA = 25 °C unless otherwise noted) 4.0 V, 1 MHz juntion to mount SGP1R SGP2R SGP3R SGP4R SGP5R SGP6R SGP7R Unit 1.3 Volts VF 5 IR µA 250 trr 150 250 500 nS CJ 5 pF RθJM 60 ℃/W Note:1),The thermal resistance from junction to mount,mounted on P.C.B with 5×5mm copper pads,2 OZ,FR4 PCB www.goodark.com 1/4 2015.04-Rev.A SGP1R thru SGP7R Surface Mount Glass Passivated Fast Recovery Rectifier Reverse Voltage 50~1000V Forward Current 1A Ratings and Characteristics Curves (TA = 25℃ unless otherwise noted) Figure 2.Maximum Non‐Repetitive Peak Forward Surge Current Figure 1.Forward Current Derating Curve Figure 3. Typical Instantaneous Forward Characteristics Figure 4. Typical Reverse Characteristics Figure 5. Typical Junction Capacitance www.goodark.com 2/4 2015.04-Rev.A SGP1R thru SGP7R Surface Mount Glass Passivated Fast Recovery Rectifier Reverse Voltage 50~1000V Forward Current 1A Package Outline Dimensions Package eSGP A B C D E L HE Unit:mm MIN 0.9 0.5 0.1 1.4 2.0 0.35 2.4 MAX 1.08 0.7 0.25 1.6 2.2 0.65 2.8 Unit:inch MIN 0.035 0.020 0.004 0.055 0.079 0.014 0.094 MAX 0.043 0.028 0.010 0.063 0.087 0.026 0.110 Packing Information Packing quantities: 3000 pcs/Reel, 40 Reels/Box; 8mm Tape, 7" Reel Tape & Reel Specification www.goodark.com 3/4 2015.04-Rev.A SGP1R thru SGP7R Surface Mount Glass Passivated Fast Recovery Rectifier Reverse Voltage 50~1000V Forward Current 1A Disclaimers These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-Ark product best suited to the customer’s application; they do not convey any license under any intellectual property rights, rights or any other rights, rights belonging to Suzhou Good-Ark Good Ark Electronics Co., Co Ltd.or a third party. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any third-party ’ s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Suzhou GoodArk Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. errors Suzhou Good-Ark Electronics Co., Co Ltd. Ltd assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including our website home page. (http://www.goodark.com) When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce in whole or in part these materials materials. Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2015.04-Rev.A