RS1510FL Surface Mount Glass Passivated Fast Recovery Rectifier Reverse Voltage 1000V Forward Current 1.5A Features • • • • • • • • Glass passivated Fast Recovery rectifiers Very low profile - typical height of 1.0 mm Low forward voltage drop Low leakage current Moisture sensitivity: level 1, per J-STD-020 AEC-Q101 qualified High temperature soldering guaranteed: 260℃/10 seconds Halogen-free according to IEC 61249-2-21 definition eSGA (SOD-123FL) Typical Applications For use of general purpose rectification in lighting, cellular phone, portable device, power supplies and other consumer applications. Maximum Ratings (TA = 25 °C unless otherwise noted) Parameter Symbol RS1510FL Unit Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage VRRM VRMS VDC 1000 V 700 V 1000 V Maximum average forward rectified current at TL(See Fig.1) IF(AV) 1.5 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 50 A TJ, TSTG - 55 to + 150 °C Operating junction and storage temperature range Electrical Characteristics (TA = 25 °C unless otherwise noted) Parameter Test Conditions Symbol Maximum instantaneous forward voltage 1 .5A Maximum DC reverse current TA=25℃ at rated DC blocking voltage TA=125℃ IF=0.5A,IR=1.0A, Maximum reverse recovery time Irr=0.25A Typical junction capacitance Typical thermal resistance 1） VF RS1510FL Unit 1.3 Volts 5 IR 50 µA trr 500 nS CJ 7.5 pF juntion to mount RθJM 5 juntion to ambient RθJA 70 juntion to case RθJC 30 4.0 V, 1 MHz ℃/W Note1):Mounted on PCB with 5.0×5.0mm copper pads,2 OZ,FR4 PCB; www.goodark.com 1/4 2013.12-Rev.A RS1510FL Surface Mount Glass Passivated Fast Recovery Rectifier Reverse Voltage 1000V Forward Current 1.5A Ratings and Characteristics Curves (TA = 25℃ unless otherwise noted) Figure 2.Maximum Non-Repetitive Peak Forward Surge Current Figure 1.Forward Current Derating Curve Figure 4. Typical Junction Capacitance Figure 3. Typical Reverse Characteristics Figure 5. Typical Instantaneous Forward Characteristics www.goodark.com 2/4 2013.12-Rev.A RS1510FL Surface Mount Glass Passivated Fast Recovery Rectifier Reverse Voltage 1000V Forward Current 1.5A Package Outline Dimensions DIM A Unit: mm Unit: inch MIN MAX MIN MAX 0.9 1.08 0.035 0.043 A1 0 0.1 0.000 0.004 B 0.85 1.05 0.033 0.041 C 0.1 0.25 0.004 0.010 D 1.7 2 0.067 0.079 E 2.9 3.1 0.114 0.122 L 0.43 0.83 0.017 0.033 HE 3.5 3.9 0.138 0.154 Soldering footprint Packing Information Packing quantities: 3000 pcs/Reel, 40 Reels/Box; 8mm Tape, 7" Reel Tape & Reel Specification www.goodark.com 3/4 2013.12-Rev.A RS1510FL Surface Mount Glass Passivated Fast Recovery Rectifier Reverse Voltage 1000V Forward Current 1.5A Disclaimers These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-Ark product best suited to the customer ’ s application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Suzhou Good-Ark Electronics Co., Ltd.or a third party. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any third-party ’ s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including our website home page. (http://www.goodark.com) When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce in whole or in part these materials. Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2013.12-Rev.A