P21A thru P27A Surface Mount Glass Passivated Standard Rectifier Reverse Voltage 50~1000V Forward Current 2A Features • • • • • • • Glass passivated Standard Rectifiers Low profile, typical thickness 0.8mm Low forward voltage drop Low leakage current Moisture sensitivity: level 1, per J-STD-020 Heatsink structure High temperature soldering guaranteed: 260℃/10 seconds iSGA (SOD-123HS) Typical Applications For use of general purpose rectification in lighting, cellular phone, portable device, power supplies and other consumer applications. Maximum Ratings (TA = 25 °C unless otherwise noted) Parameter Symbol P21A P22A P23A P24A P25A P26A P27A Unit Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current Peak forward surge current 8.3 ms single half sinewave superimposed on rated load VRRM VRMS VDC IF(AV) Rating for fusing(t＜8.3ms) Operating junction and storage temperature range Electrical Characteristics Test Conditions Minimum Breakdown voltage Ta=25℃,IR=100uA Maximum instantaneous forward IF=2 A,Ta=25℃ voltage IF=2 A,Ta=125℃ Typical reverse recovery time Typical junction capacitance Typical thermal resistance1) 100 200 400 600 800 1000 V 35 70 140 280 420 560 700 V 50 100 200 400 2.0 600 800 1000 V A IFSM 60 A I2t 15 A2sec TJ, TSTG - 55 to + 150 °C (TA = 25 °C unless otherwise noted) Parameter Maximum DC reverse current at rated DC blocking voltage 50 TA=25℃ TA=125℃ IF=0.5A,IR=1.0A, Symbol P21A P22A P23A P24A P25A P26A P27A Unit VBR VF IR 400 600 1.1 1000 Volts 0.9 5 50 µA trr 1.5 uS CJ 12.4 pF juntion to ambient RθJA TBD juntion to lead RθJL TBD Irr=0.25A 4.0 V, 1 MHz ℃/W Note:1),The thermal resistance from junction to ambient,case or lead,mounted on FR-4 P.C.B www.goodark.com 1/4 2016.03-Rev.A P21A thru P27A Surface Mount Glass Passivated Standard Rectifier Reverse Voltage 50~1000V Forward Current 2A Ratings and Characteristics Curves (TA = 25℃ unless otherwise noted) Figure 2.Maximum Non-Repetitive Peak Forward Surge Current Figure 1.Forward Current Derating Curve Figure 4. Typical Junction Capacitance Figure 3. Typical Reverse Characteristics Figure 5. Typical Instantaneous Forward Characteristics www.goodark.com 2/4 2016.03-Rev.A P21A thru P27A Surface Mount Glass Passivated Standard Rectifier Reverse Voltage 50~1000V Forward Current 2A Characteristics Package Outline Dimensions iSGA Package Unit:mm MIN MAX A 0.75 0.90 B 0.85 1.05 B1 0.85 1.05 C 0.1 0.25 D 1.9 2.1 E 2.9 3.1 L1 2.0 2.45 L2 0.4 0.85 L3 1.3 1.7 HE 3.5 3.9 Soldering footprint Packing Information Packing quantities: Reel size 7" Quantity/reel 3K Quantity/inner Box 30K Quantity/Carton 120K Tape & Reel Specification www.goodark.com 3/4 2016.03-Rev.A P21A thru P27A Surface Mount Glass Passivated Standard Rectifier Reverse Voltage 50~1000V Forward Current 2A Disclaimers These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-Ark product best suited to the customer ’ s application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Suzhou Good-Ark Electronics Co., Ltd.or a third party. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any third-party’s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including our website home page. (http://www.goodark.com) When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce in whole or in part these materials. Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2016.03-Rev.A