L2A1 thru L2A7/L21A thru L27A Surface Mount Glass Passivated Standard Rectifier Reverse Voltage 50~1000V Forward Current 2A Features • • • • • • • • Glass passivated standard rectifiers Ideal for automated placement Low forward voltage drop Low leakage current Moisture sensitivity: level 1, per J-STD-020 Solder dip 260 °C, 10 s Low profile， typical thickness 1.0mm AEC-Q101 qualified eSGB (SMAF) Typical Applications For use of general purpose rectification in lighting, cellular phone, portable device, power supplies, and other consumer applications. Maximum Ratings (TA = 25 °C unless l otherwise th i noted) t d) Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current VRRM VRMS VDC IF(AV) L2A1 L2A2 L2A3 L2A4 L2A5 L2A6 L2A7 L21A L22A L23A L24A L25A L26A L27A 50 100 200 400 600 800 1000 35 70 140 280 420 560 700 50 100 200 400 600 800 1000 2.0 Peakk forward P f d surge currentt 8.3 8 3 ms single i l half h lf sinei wave superimposed on rated load IFSM 55 A Operating junction and storage temperature range TJ, TSTG - 55 to + 150 °C Parameter Symbol Electrical Characteristics Parameter T i l junction Typical j i capacitance i Typical thermal resistance 1) 4.0 4 0 V, V 1 MHz MH juntion to mount V V V A (TA = 25 °C unless otherwise noted) L2A1 L2A2 L2A3 L2A4 L2A5 L2A6 L2A7 L21A L22A L23A L24A L25A L26A L27A Unit VF 1.1 Volts IR 5 50 µA trr 2.3 uS CJ RθJM 6 pF 20 ℃/W Test Conditions Symbol y Maximum instantaneous forward 2A voltage Maximum DC reverse current at TA=25℃ rated DC blocking voltage TA=125℃ IF=0.5A,IR=1.0A, Typical reverse recovery time Irr=0.25A Unit Note:1),The thermal resistance from junction to mount,mounted on P.C.B with 8×8mm copper pads,2 OZ,FR4 PCB www.goodark.com 1/4 2014.02-Rev.A L2A1 thru L2A7/L21A thru L27A Surface Mount Glass Passivated Standard Rectifier Reverse Voltage 50~1000V Forward Current 2A Ratings and Characteristics Curves (TA = 25℃ unless otherwise noted) Figure 2.Maximum Non‐Repetitive Peak Forward Surge Current Figure 1.Forward Current Derating Curve Figure 3. Typical Instantaneous Forward Characteristics Figure 4. Typical Reverse Characteristics Figure 5. Typical Junction Capacitance www.goodark.com 2/4 2014.02-Rev.A L2A1 thru L2A7/L21A thru L27A Surface Mount Glass Passivated Standard Rectifier Reverse Voltage 50~1000V Forward Current 2A Package Outline Dimensions DIM Unit: mm Unit: inch MIN MAX MIN MAX A 0.92 1.08 0.036 0.043 A1 0 0.1 0.000 0.004 B 1.25 1.45 0.049 0.057 C 0.1 0.25 0.004 0.010 D 2.6 2.8 0.102 0.110 E 4.1 4.3 0.161 0.169 L 07 0.7 11 1.1 0 028 0.028 0 043 0.043 HE 4.8 5.2 0.189 0.205 Soldering footprint Packing Information Packing quantities: Reel size 7" 13" Quantity/reel 3K 10K Quantity/inner Box 21K 20K Quantity/Carton 84K 180K Tape & Reel Specification www.goodark.com 3/4 2014.02-Rev.A L2A1 thru L2A7/L21A thru L27A Surface Mount Glass Passivated Standard Rectifier Reverse Voltage 50~1000V Forward Current 2A Disclaimers These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-Ark product best suited to the customer ’ s application; they do not convey any license under any intellectual property rights, rights or any other rights, rights belonging to Suzhou GoodArk Electronics Co., Ltd.or a third party. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any third-party ’ s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. errors Suzhou Good-Ark Good Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including our website home page. (http://www.goodark.com) When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce d iin whole h l or iin partt th these materials. t i l Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2014.02-Rev.A