L1A thru L7A Surface Mount Glass Passivated Rectifier Reverse Voltage 50~1000V Forward Current 1A Features • • • • • • • • Glass passivated standard rectifiers Ideal for automated placement L Low fforward d voltage lt d drop Low leakage current Moisture sensitivity: level 1, per J-STD-020 Solder dip 260 °C, 10 s Low profile， typical thickness 1.0mm AEC-Q101 qualified eSGB (SMAF) Typical Applications For use of general purpose rectification in lighting, cellular phone, portable device, power supplies, and other consumer applications. Maximum Ratings (TA = 25 °C unless otherwise noted) Parameter Symbol L1A L2A L3A L4A L5A L6A L7A Unit Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TL (S 1) surge current 8.3 ms single Peak Fi forward VRMS VDC 35 50 70 100 140 200 280 400 420 600 560 800 700 1000 V V IF(AV) 1.0 A half sine-wave superimposed on rated load IFSM 30 A TJ, TSTG - 55 to + 150 °C Operating junction and storage temperature range El t i l Ch Electrical Characteristics t i ti Parameter Maximum instantaneous forward lt Maximum DC reverse current at rated DC blocking voltage Typical reverse recovery time Typical junction capacitance Typical thermal resistance1) Test Conditions Symbol 1A (TA = 25 °C unless otherwise noted) L1A L3A L4A L5A 1.1 VF TA=25℃ TA=125℃ L2A L6A L7A Unit Volts 5 IR µA 50 IF=0.5A,IR=1.0A, trr 1.8 uS CJ 6 pF RθJM 10 ℃/W Irr=0.25A 4.0 V, 1 MHz juntion to mount Note:1),The thermal resistance from junction to mount,mounted on P.C.B with 8×8mm copper pads,2 OZ,FR4 PCB www.goodark.com 1/4 2014.03-Rev.A L1A thru L7A Surface Mount Glass Passivated Rectifier Reverse Voltage 50~1000V Forward Current 1A Ratings and Characteristics Curves (TA = 25℃ unless otherwise noted) Figure 2.Maximum Non‐Repetitive Peak Forward Surge Current Figure 1.Forward Current Derating Curve Figure 3. Typical Instantaneous Forward Characteristics www.goodark.com Figure 4. Typical Reverse Characteristics 2/4 2014.03-Rev.A L1A thru L7A Surface Mount Glass Passivated Rectifier Reverse Voltage 50~1000V Forward Current 1A Package Outline Dimensions in inches (millimeters) DIM Unit: mm Unit: inch A A1 B C D MIN 0.92 0 1.25 0.1 2.6 MAX 1.08 0.1 1.45 0.25 2.8 MIN 0.036 0.000 0.049 0.004 0.102 MAX 0.043 0.004 0.057 0.010 0.110 E L HE 4.1 07 0.7 4.8 4.3 11 1.1 5.2 0.161 0.169 0 028 0.043 0.028 0 043 0.189 0.205 Soldering footprint Packing Information Packing quantities: 10,000 pcs/Reel，12mm Tape, 13" Reel Tape & Reel Specification www.goodark.com 3/4 2014.03-Rev.A L1A thru L7A Surface Mount Glass Passivated Rectifier Reverse Voltage 50~1000V Forward Current 1A Disclaimers These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-Ark product best suited to the customer ’ s application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Suzhou Good-Ark Electronics Co Co., Ltd Ltd.or or a third party party. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any third-party’s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Suzhou Good-Ark Electronics C Co., Ltd. Ltd assumes no responsibility ibilit for f any damage, d liability, li bilit or other th loss l rising i i from f these th inaccuracies or errors. Please also pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including our website home page. (http://www.goodark.com) When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce in whole or in part these materials. Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2014.03-Rev.A