L2H1 thru L2H7 Surface Mount Glass Passivated High Efficiency Rectifier Reverse Voltage 50~1000V Forward Current 2A Features • • • • • • • Glass passivated High Efficiency rectifiers Ideal for automated placement L Low fforward d voltage lt d drop Low leakage current Moisture sensitivity: level 1, per J-STD-020 AEC-Q101 qualified Low profile， typical thickness 1.0mm eSGB (SMAF) Typical Applications For use of general purpose rectification in lighting, cellular phone, portable device, power supplies and other consumer applications. Maximum Ratings (TA = 25 °C unless otherwise noted) Parameter Symbol L2H1 L2H2 L2H3 L2H4 L2H5 L2H6 L2H7 Unit Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified VRRM VRMS VDC IF(AV) 50 35 50 100 70 100 200 140 200 400 280 400 2.0 600 420 600 800 560 800 1000 700 1000 V V V A Peak forward surge current 8.3 ms single half sine sine-wave wave superimposed on rated load IFSM 50 A Operating junction and storage temperature range TJ, TSTG - 55 to + 150 °C Electrical Characteristics Parameter Test Conditions Symbol Maximum 2A instantaneous forward Maximum DC reverse TA=25℃ current at rated DC TA=125℃ blocking voltage Maximum reverse recovery time Typical junction capacitance Typical thermal resistance1) , R=1.0A,, IF=0.5A,I Irr=0.25A 4.0 V, 1 MHz juntion to mount (TA = 25 °C unless otherwise noted) L2H1 L2H2 L2H3 L2H4 L2H5 1.3 VF L2H6 1.7 L2H7 Unit Volts 5 IR µA 50 trr 50 75 nS S CJ 15 pF RθJM 20 ℃/W Note:1),The thermal resistance from junction to mount,mounted on P.C.B with 8×8mm copper pads,2 OZ,FR4 PCB www.goodark.com 1/4 2014.03-Rev.A L2H1 thru L2H7 Surface Mount Glass Passivated High Efficiency Rectifier Reverse Voltage 50~1000V Forward Current 2A Ratings and Characteristics Curves (TA = 25℃ unless otherwise noted) Figure 1.Forward Current Derating Curve Figure 2.Maximum Non‐Repetitive Peak Forward Surge Current Figure 3. Typical Reverse Characteristics Figure 4. Typical Instantaneous Forward Characteristics www.goodark.com 2/4 2014.03-Rev.A L2H1 thru L2H7 Surface Mount Glass Passivated High Efficiency Rectifier Reverse Voltage 50~1000V Forward Current 2A Package Outline Dimensions DIM Unit: mm Unit: inch MIN MAX MIN MAX A 0.92 1.08 0.036 0.043 A1 0 0.1 0.000 0.004 B 1.25 1.45 0.049 0.057 C 0.1 0.25 0.004 0.010 D 2.6 2.8 0.102 0.110 E 4.1 4.3 0.161 0.169 L 0.7 1.1 0.028 0.043 HE 4.8 5.2 0.189 0.205 Soldering footprint Packing Information Packing quantities: Reel size 7" 13" Quantity/reel 3K 10K Quantity/inner Box 21K 20K Quantity/Carton 84K 180K Tape & Reel Specification www.goodark.com 3/4 2014.03-Rev.A L2H1 thru L2H7 Surface Mount Glass Passivated High Efficiency Rectifier Reverse Voltage 50~1000V Forward Current 2A Disclaimers These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-Ark product best suited to the customer ’ s application; they do not convey any license under any intellectual property rights, rights or any other rights, rights belonging to Suzhou Good-Ark Good Ark Electronics Co., Ltd.or a third party. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any third-party ’ s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a product listed herein. The information described here may ma contain technical inaccuracies inacc racies or typographical t pographical errors. errors Suzhou S ho Good-Ark Good Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including our website home page. (http://www.goodark.com) When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce d in i whole h l or in i partt these th materials. t i l Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2014.03-Rev.A