CAPACITORS EMI X2 SUPPRESSION D2XE Polypropylene Dielectric SECTION 1 Plastic case (UL94V-0) Epoxy resin sealed, flame retardant - UL94V-0 Self healing properties Special lead lengths available UL file number E97863 SPECIFICATION Max Operating Temperature: Rated AC Voltage; Max DC Continuous Voltage: Capacitance Tolerance: DC Test Voltage: Dissipation Factor tan∂(in 10-3): at 20°C 125°C 305VAC, 50/60Hz 760V ±20%(M), closer tolerances available on request 2121 for 2 seconds C≤0.1µF 0.1µF < C ≤ 1µF C > 2.2µF at 1kHz 1 1 2 100kHz 5 Insulation resistance at 20°C, rel. humidity ≤ 65% Marks of conformity C ≤ 0.33µF C > 0.33µF 30000MΩ 10000 s Standards EN 132400, IEC 60384-14 UL 1414 / UL 1283 CSA C22.2 No.1 / No.8 CQC (GB/T 14472-1998) c Certificate 40005536/40010694 E97863 / E157153 E97863 / E157153 (approved by UL) CQC001007-14859 *Approved for V=250Vac ORDERING INFORMATION D2XE 0.1 305 M 15 26 Range Capacitance Voltage Tolerance Pitch Options M = 20% K = 10% 15 22.5 27.5 37.5 TA = Tape Ammo TR = Tape Reel 26 = Lead Length 26mm Blank = Lead Length 6mm µF 101 www.dubilier.co.uk CAPACITORS EMI X2 SUPPRESSION D2XE Lead Spacing P +/- 0.4(mm) Capacitance 10 10NF 22NF 33NF 47NF 68NF 0.1UF 15 33NF 47NF 68NF 0.1UF 0.22UF 0.33UF 0.47UF 22.5 0.33UF 0.47UF 0.68UF 1.0UF *1.5UF *2.2UF 27.5 1UF 1.5UF 2.2UF 3.3UF 4.7UF 37.5 3.3UF 4.7UF 6.8UF *10UF Max operating temp 110C Max Dimensions (mm) h 9 9 9 12 12 12 10.5 10.5 11 11 14.5 17.5 17.5 16.5 16.5 18.5 22 22 29.5 21 23 27.5 27.5 36.5 32.5 39.5 42.5 42.5 l 13 13 13 13 13 13 18 18 18 18 18 18 18 26.5 26.5 26.5 26.5 26.5 26.5 31.5 31.5 31.5 31.5 31.5 41.5 41.5 41.5 41.5 SECTION 3 b 4 4 4 6 6 6 5 5 6 6 8.5 9 9 8.5 8.5 10.5 12 12 14.5 11 13.5 18 18 22 18 20 28 28 OUTLINE DRAWING b h l t SECTION 1 RANGE & DIMENSIONS p ø0.8 t = 5.5 ±0.5mm, Other lead lengths available upon request, contact sales office for details 102 www.dubilier.co.uk