Small Cubic Type VGA CCD Monochrome PoCL Camera Link Camera FV-L030B1 Product Specifications RICOH COMPANY, LTD. FV-L030B1 Product Specifications Rev. 1.01 1/11 Copyright & Disclaimer Sensor Technology Co., Ltd. (DBA Sentech) believes the contents and specifications of its website, catalog, documentation and ads are correct; however, Sentech provides no representation or warranty regarding such information or product(s) contained therein. It is requested that Sentech be given appropriate acknowledgement in any subsequent use of such work by a third party. While every effort has been made to ensure that the details contained in Sentech’s website and all documentation are correct and up-to-date, Sentech assumes no liability, legal or otherwise for any errors in listings, specifications, part numbers, process, software or model applications. Sentech reserves the right to change specifications, product descriptions, product quality, pricing and application at any time without prior written or oral notice. Any party using such information assumes all risk for any and all damaged caused to themselves, a third party and/or property by virtue of incorrect information and/or failure of these products. By installing and/or using a Sentech software development kit or other similar product and/or information obtained from Sentech’s website, catalog, documentation or ads, you hereby accept and understand these stated terms and conditions. FV-L030B1 Product Specifications Rev. 1.01 2/11 Table of Contents 1. Safety / Product Precautions ............................................................................................................................... 4 2. Electronic / Mechanical / Environmental Specifications................................................................................... 6 2.1 3. Connector Specifications..................................................................................................................................... 8 3.1 3.2 4. Spectral Sensitivity Characteristics..................................................................................................................... 7 Camera Link Connector...................................................................................................................................... 8 Power-I/O Connector .......................................................................................................................................... 9 Dimensions.......................................................................................................................................................... 10 FV-L030B1 Product Specifications Rev. 1.01 3/11 1. Safety / Product Precautions Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN For U.S.A. ! CAUTION: TO REDUCE TH E RISK OF EL ECTRIC SHOCK, DO N OT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Warning: This equipment generates and uses radio frequency energy and if not installed and used properly, I.e., in strict accordance with the instruction manual, may cause harmful interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. For Canada The li ghtning flash with arrowhea d symbol, within an equilateral triangle, i s i nt ended t o alert the use r t o the pre sence of uni nsulated “dangerous v o l ta g e ” w i th in t h e p r o du c t ’ s enclosure t hat may be of suffici ent ma gnitude t o c onst i tute a ri sk of electric shock to persons. Warning: The exclama ti on point wi t hi n a n equilateral triangle is intended to alert the user to the presence of import ant operating and maintenance (servicing) i n st r u c ti o ns in t h e l i te r a t u r e accompanying the appliance. WARNING: This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Product Precautions Handle the camera with care. Do not abuse the camera. Avoid striking or shaking it. Improper handling or storage could damage the camera. Do not pull or damage the camera cable. During camera use, do not wrap the unit in any material. This will cause the internal temperature of the unit to increase. Do not expose the camera to moisture, or do not try to operate it in wet areas. Do not operate the camera beyond its temperature, humidity and power source ratings. While the camera is not being used, keep the lens or lens cap on the camera to prevent dust or contamination from getting in the CCD or filter area and scratching or damaging this area. Do not keep the camera under the following conditions: In wet, moist, and high humidity areas • Under hot direct sunlight • In high temperature areas • Near an object that releases a strong magnetic or electric field • Areas with strong vibrations Apply the power that satisfies the requirements specified in this document to the camera. Use a soft cloth to clean the camera. Use pressured air spray to clean the surface of the glass. DO not scratch the surface of the glass. FV-L030B1 Product Specifications Rev. 1.01 4/11 The camera is a general-purpose electronic device; using the camera for the equipment that may threaten human life or cause dangers to human bodies directly in case of failure or malfunction of the camera is not guaranteed. Use the camera for special purposes at your own risk. FV-L030B1 Product Specifications Rev. 1.01 5/11 2. Electronic / Mechanical / Environmental Specifications Product Electronic Specifications FV-L030B1 Imager 1/3” Interline VGA Monochrome Progressive CCD: ICX424AL Total Picture Elements Active Picture Elements Cell Size 692 (H) x 504 (V) VGA: 648 (H) x 494 (V) 7.4 (H) x 7.4 (V) µm Scanning System Progressive Full Scanning, Partial Full Scanning, ½ Partial Scanning, ¼ Partial Scanning, Scanning Mode Variable Partial Scanning, Binning, Binning Partial Scanning, Binning ½ Partial Scanning, Binning ¼ Partial Scanning, Binning Variable Partial Scanning Vertical Frequency (Frame Rate) 31.47 (30fps) / 62.94 (60fps) / 94.784 (90fps) Hz in partial full scanning (default scanning mode) Horizontal Frequency 15.7343 (30fps) / 31.4685 (60fps) / 47.2028 (90fps) kHz Pixel Frequency 12.2727 (30fps) / 24.5454 (60fps) / 36.8181 (90fps) MHz S/N Ratio (Standard Deviation @ 8bit output) Minimum Scene Illumination Sync. System <= 3 Digit (Gain 0 dB) 0.4 Lux at F1.2 Internal Video Output Format Tap Configuration Digital 8, 10, or 12 bit Camera Link (Base Configuration) 1 Tap (1X-1Y) OFF, 1/3 to 1/40,000 sec. (Variable at every H and clock)(30fps) Exposure Time OFF, 1/7 to 1/80,000 sec. (Variable at every H and clock)(60fps) OFF, 1/11 to 1/120,000 sec. (Variable at every H and clock)(90fps) Gain 0 to 27 dB Gamma 1.0 Smear Reduction Power Supply Selectable ON/OFF via the communication Input Voltage DC 12V± 10% via Camera Link connector Consumption Less than 2.7W Operational Mode Communication Free-run; Edge Preset Trigger (V-reset, Non-reset); Pulse Width Trigger (V-reset, Non-reset) RS232 via Camera Link connector Mechanical Dimensions 28 (W) x 28 (H) x 40 (D) mm (NOT including the connector) Specifications Optical Filter No IR cut filter Materials Aluminum (AC) Lens Mount C mount Interface Connector I/O Connector: HR 10A-7R-6PB (Hirose) or equivalent Camera Link Connector: SDR (3M) or equivalent Tripod can be attached to 4 plates Tripod (four M4 screws on the bottom plate, two M4 screws on the other 3 plates) Weight Environmental Specifications Approximately 43 g Operational Temperature FV-L030B1 Product Specifications Rev. 1.01 Temperature: -5 to 50⁰C 6/11 Storage Temperature: -30 to 65⁰C Vibration 20Hz to 200Hz to 20Hz (5min./cycle); Acceleration 10G, 3 directions 30 min. each Shock Acceleration 38G, half amplitude 6ms, 3 directions 3 times each Standard Compliancy EMS: EN61000-6-2, EMI: EN55011 (Class B), FCC PART15 subpart B classA RoHS 2.1 RoHS Compliant Spectral Sensitivity Characteristics 1 Relative Response 0.8 0.6 0.4 0.2 0 400 500 FV-L030B1 Product Specifications Rev. 1.01 600 700 Wave length [nm] 800 900 1000 7/11 3. Connector Specifications Power-I/O Connector Camera Link Connector 3.1 Camera Link Connector SDR (3M) or equivalent This product is a PoCL type. When a frame grabber is PoCL compliant, DO NOT SUPPLY POWER FROM THE I/O CONNECTOR. When a frame grabber is NOT PoCL compliant, supply power from the I/O connector. Pin Assignment Pin No. Signal Name Pin No. Signal Name 1 +12V 14 GND 2 X0- 15 X0+ 3 X1- 16 X1+ 4 X2- 17 X2+ 5 Xclk- 18 Xclk+ 6 X3- 19 X3+ 7 SerTC+ 20 SerTC- 8 SerTFG- 21 SerTFG+ 9 CC1-(TRG) 22 CC1+(TRG) 10 CC2+ 23 CC2- 11 CC3- 24 CC3+ 12 CC4+ 25 CC4- 13 GND 26 +12V FV-L030B1 Product Specifications Rev. 1.01 8/11 3.2 Power-I/O Connector HR10A-7R-6PB（Hirose）or equivalent This connector is for the power supply (12Vdc) and input /output signals. Use HR10A-7P-6S (Hirose) or equivalent for the cable side. Pin Assignment Pin No. Signal Name IN / OUT 1 GND IN 2 I/O-1 IN/OUT 3 I/O-2 IN/OUT 4 I/O-3 Voltage Low Voltage High Voltage 0V IN/OUT 5 I/O-4 IN/OUT 6 +12Vdc IN IN 0 to +0.5 +2.5 to +5.0V OUT 0V +3.3V IN 0 to +0.5 +2.5 to +5.0V OUT 0V +3.3V IN 0 to +0.5 +2.5 to +5.0V OUT 0V +3.3V IN 0 to +0.5 +2.5 to +5.0V OUT 0V +3.3V +12Vdc Input/output signals can be assigned through the camera setting communication (see table 4). Trigger input signal can be assigned either on Camera Link connector (CC1) or on the No. 2 pin of the IO connector through the camera setting communication. IO Signal Patterns Command No. F0H[3..0] 11H[7] 0 Option 0 (Initial Setting) 0H (initial setting) 1 HR10A-7R-6PB (Hirose) No.2 Pin No.3 Pin No.4 Pin No.5 Pin I/O-1 (SP4) I/O-2 (SP3) I/O-3 (SP2) I/O-4 (SP1) IN/TRG IN/- IN/- IN/TRG OUT/VD OUT/HD OUT/ STROBE OUT/ STROBE Option 1 1H - Option 2 2H - OUT/CC4 OUT/CC3 OUT/CC2 OUT/CC1 Option 3 3H - OUT/FVAL OUT/XSG OUT/XSUB OUT/CC1 Option 4 4H - OUT/FVAL OUT/LVAL OUT/DVAL OUT/XHD OUT/EXPDUR (high-active) (Exposure) OUT/VD N/A Option 5 5H - Option 6 6H - Others 7H-FH - FV-L030B1 Product Specifications Rev. 1.01 For Test Use Only OUT/PIC_D9 (MSB) OUT/TRG OUT/CC1 N/A OUT/HD For Test Use Only 9/11 4. Dimensions Unit: mm FV-L030B1 Product Specifications Rev. 1.01 10/11 Revision History Rev Date 1.00 1.01 2012/06/15 2012/07/12 Changes Note Initial Release Updated Document Title Electronic Specifications Shutter Speed Exposure Time Added Smear Reduction Deleted F1H command due to test use only RICOH COMPANY, LTD. URL http://www.ricoh.com/fa_security/ FV-L030B1 Product Specifications Rev. 1.01 11/11