1N5802-1N5806 HIGH EFFICIENCY RECTIFIERS High-reliability discrete products and engineering services since 1977 FEATURES Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number. Available as non-RoHS (Sn/Pb plating), standard, and as RoHS by adding “-PBF” suffix. MAXIMUM RATINGS Parameter Symbol Working peak reverse voltage 1N5802 1N5803 1N5804 1N5805 1N5806 Value Unit 50 75 100 125 150 VRWM V Forward surge current (1) IFSM 35 A Average rectified output current @ TL = 75°C at 3/8” lead length (2) IO1 2.5 A Average rectified output current @ TA = 55°C at 3/8” lead length (3) IO2 1.0 A Capacitance @ VR = 10V, f = 1MHz, Vsig = 50mV(p-p) C 25 pF Reverse recovery time (4) trr 25 ns Solder temperature @ 10 s Junction and storage temperature range Thermal resistance junction to lead (L = 0.375”) TSP 260 °C TJ, Tstg -65 to +175 °C RѲJL 36 °C/W Note 1: TA = 25°C @ IO = 1.0A and VRWM for 10 8.3ms surges at 1 minute intervals. Note 2: IO1 is rated at 2.5A @ TL = 75°C at 3/8” lead length. Derate at 25mA/°C for TL above 75°C. Note 3: IO2 is rated at 1.0A @ TA = 55°C for PC boards where thermal resistance from mounting point t ambient is sufficiently controlled (R ѲJX < 154°C/W) where TJ(max) 175°C is not exceeded. Derate at 8.33mA/°C for TA above 55°C. Note 4: IF = 0.5A, IRM = 0.5A, IR(REC) = 0.05A. ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise specified) Part number Minimum breakdown voltage @ 100µA Maximum forward voltage V(BR) Volts Thermal impedance @ Maximum reverse current @ VRWM Maximum surge current (5) Maximum reverse recovery time (6) VFM IR IFSM trr ZѲJX Volts µA Amps ns °C/W IF = 1.0A IF = 2.5A 25°C 125°C tH = 10ms 1N5802 60 0.875 0.975 1 175 35 25 4.0 1N5803 85 0.875 0.975 1 175 35 25 4.0 1N5804 110 0.875 0.975 1 175 35 25 4.0 1N5805 135 0.875 0.975 1 175 35 25 4.0 1N5806 160 0.875 0.975 1 175 35 25 4.0 (7) Note 5: TA = 2.5°C @ IO = 1.0A and VRWM for ten 8.3ms surges at 1 minute intervals. Note 6: IF = 0.5A, IRM = 0.5A, IR(REC) = 0.05A. Note 7: See figure 1 for thermal impedance curve. Rev. 20150709 High-reliability discrete products and engineering services since 1977 1N5802-1N5806 HIGH EFFICIENCY RECTIFIERS MECHANICAL CHARACTERISTICS Case Digi A Marking Alpha Numeric Polarity Cathode Band Rev. 20150709 High-reliability discrete products and engineering services since 1977 1N5802-1N5806 HIGH EFFICIENCY RECTIFIERS Rev. 20150709 High-reliability discrete products and engineering services since 1977 1N5802-1N5806 HIGH EFFICIENCY RECTIFIERS Rev. 20150709