English Datasheet

Non-Contact Current Detector
Locates current in hidden wires and cables up to 1000A
With audible and visible detection
• Non-contact AC Current range is from 200mA to 1000A
• Locates current flow even where voltage
detectors cannot work
• Detects through shielded wires, conduit
and metal circuit breaker or junction boxes
• Sensitivity adjustment for locating
wires/conduit through walls
• Ideal for locating hidden conductors
• Dimensions: 5.7 x 1.1 x 1" (145 x 28 x 25mm)
Weight: 1.6oz (45g)
• Complete with smal size pocket clip
and four LR44 button batteries
• Locates wires in conduit
• Identify underground cables
• Trace low voltage HVAC wiring
• Detect leakage currents
• Find hidden wiring
• Verify energized AC solenoid and motors
Voltage check in an breaker
Ordering Information:
DA30 ............Non-Contact Current Detector
Specifications subject to change without notice.
6/16/08 - R3
Copyright © 2007-2008 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.