Double Balanced Mixer Model M6xTC RF Band Electrical Specifications RF 1.0 to 2.0 GHz : (1) Conditions Parameter SSB Conversion loss:(2) RF(GHz) 1.0-2.0 LO(GHz) 1.0-2.0 1.0-2.0 1.0-2.0 1.0-2.0 1.0-2.0 DC-1.0 Desensitization Point: 1.0-2.0 1.0-2.0 DC-1.0 Input Third Order Intercept Point: 1.0-2.0 1.0-2.0 DC-1.0 LO Power: 1.0-2.0 1.0-2.0 DC-1.0 Isolation LO to RF: LO to IF: Input 1 dB Compression Point: (3) Specifications IF(GHz) DC-1.0 Min 30 dB 20 dB Notes: 1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system at +25˚C with the nominal LO power. Specifications indicated as typical are not guaranteed. 2. SSB Noise figure is nominally within ±0.5 dB of the SSB conversion loss for IF frequencies greater than 10 MHz. 3. Usable LO drives are up to 2 dB below and 3 dB above nominal. M6xTC Typical 8.0 dB Max 9.0 dB 38 dB 25 dB +3 dBm +5 dBm +15 dBm +1 dBm +3 dBm +13 dBm +13 dBm +15 dBm +26 dBm +7 dBm +13 dBm +23 dBm M63 M66 M67 M63 M66 M67 M63 M66 M67 M63 M66 M67 Model M6xTC LO Power 3 = +7 dBm 6 = +13 dBm 7 = +23 dBm Typical Performance at 25˚C Outline: TC All dimensions are in inches and [mm]. Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, FL 32905 · PH (888) 553-7531 · Fax (888) 553-7532 www.SpectrumMicrowave.com Spectrum Microwave · 2707 Black Lake Place · Philadelphia, PA 19154 · PH (215) 464-4000 · Fax (215) 464-4001 Rev. 1/27/09