I/Q MIXER/ MODULATOR MODEL MIQ24MS-6 Available as: MIQ24MS-6, .850 “ x 1.05” Microstrip Carrier Features RF: 3 to 4 GHz LO: 3 to 4 GHz IF: DC to 62 MHz Conversion Loss: 6.0 dB Typical LO to IF Isolation: 32 dB Typical Operating Temperature Range: - 55ºC to +100ºC Electrical Specifications :(1) Conditions RF (GHz) Parameter Specifications LO (GHz) IF (MHz) 3.0 - 4.0 DC - 62 Min Typical 30 dB 30 dB 35 dB 32 dB 25 dB SSB Conversion loss: Isolations LO to RF LO to IF 3.0 - 4.0 Sideband Suppression: 3.0 - 4.0 3.0 - 4.0 DC - 62 22 dB LO Power Input: 3.0 - 4.0 3.0 - 4.0 DC - 62 +8.0 dBm 3.0 - 4.0 3.0 - 4.0 Max 6.0 dB 10.0 dBm 8.0 dB +11 dBm Notes: 1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system at +25ºC with an LO power of +10 dBm. 2. Noise figure is typically within ±0.5 dB of the SSB Conversion loss for IF frequencies greater than 10 MHz. Typical Performance Data Case Outline MSQ8 3 Conversion Loss (dB) 4 5 6 7 10 3.0 GHz 4.0 GHz LO to RF, LO to IF Isolation (dB) 20 LO to IF 30 40 50 0 3.0 GHz LO to RF 4.0 GHz Sideband Suppression (dB) 10 20 All dimensions are in inches and [mm]. Microstrip Traces: LO, RF, and IF traces are 0.02 in (0.51 mm) wide tin plated copper on Duroid, suitable for solder attach. 30 40 3.0 GHz 4.0 GHz Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, FL 32905 · PH (888) 553-7531 · Fax (888) 553-7532 01/03/06 www.SpectrumMicrowave.com Spectrum Microwave (Europe) · 2707 Black Lake Place · Philadelphia, PA 19154 · PH (215) 464-4000 · Fax (215) 464-4001