XWAY™ PHY
Ethernet Physical Layer Devices
EASY 7071 Reference Board
Version 2.3.1
for
XWAY™ PHY11G (PEF 7071), Version 1.5
Getting Started
Revision 1.0, 2013-12-11
Edition 2013-12-11
Published by
Lantiq Deutschland GmbH
Lilienthalstraße 15
85579 Neubiberg
Germany
© 2013 Lantiq Deutschland GmbH
All Rights Reserved.
Legal Disclaimer
The information given in this document is confidential.
SUCH INFORMATION SHALL IN NO EVENT BE REGARDED AS A GUARANTEE OF CONDITIONS OR
CHARACTERISTICS. WITH RESPECT TO ANY VALUES STATED AS "TYPICAL" AS WELL AS EXAMPLES OR
HINTS PROVIDED HEREIN, INCLUDING THOSE RELATED TO USE AND/OR IMPLEMENTATION OR
APPLICATION OF COMPONENTS, LANTIQ DEUTSCHLAND GMBH ("LANTIQ") HEREBY DISCLAIMS ANY
AND ALL WARRANTIES AND LIABILITIES OF ANY KIND, INCLUDING WITHOUT LIMITATION, WARRANTIES
OF NON-INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS OF ANY THIRD PARTY. IN PARTICULAR,
THOSE VALUES, EXAMPLES OR HINTS ARE NO WARRANTIES OF A CERTAIN FUNCTIONALITY,
CONDITION OR QUALITY OF THE LANTIQ COMPONENT AND ALWAYS HAVE TO BE VERIFIED IN THE
TARGET APPLICATION.
The information in this document is subject to regular updates and/or corrections via errata sheet(s) or new
revisions. It is only valid as updated and/or corrected. Once a new revision or errata sheet is available, it can be
downloaded from Lantiq's Competence Center:
www.lantiq.com/contact-lantiq
Any user of this document must ensure that they only use the latest update- and/or corrected revision.
LANTIQ HEREBY DISCLAIMS ANY AND ALL WARRANTIES AND LIABILITIES OF ANY KIND, INCLUDING
WITHOUT LIMITATION, WARRANTIES OF NON-INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS
OF ANY THIRD PARTY, WITH RESPECT TO PREVIOUS REVISIONS OF THIS DOCUMENT ONCE AN
UPDATE OR ERRATA SHEET IS AVAILABLE.
Information
For further information on technology, delivery terms and conditions and prices, please contact the nearest Lantiq
office (www.lantiq.com).
Warning
Lantiq components must not be used in life-support devices or systems.
Life-support devices or systems are those systems intended to be implanted in the human body or to support
and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the
user or other persons may be endangered.
EASY 7071 Reference Board
Version 2.3.1
XWAY™ PHY, Ethernet Physical Layer Devices
Revision History: Revision 1.0, 2013-12-11
Previous Revision: None
Page
Subjects (major changes since last revision)
Trademarks of Lantiq
CONVERGATE™, COSIC™, DUALFALC™, DUSLIC™, ELIC™, EPIC™, FALC™, GEMINAX™, ISAC™,
IWORX™, OCTALFALC™, OCTAT™, QUADFALC™, SCOUT™, SEROCCO™, SICOFI™, SLIC™, SMINT™,
SOCRATES™, VINAX™, VINETIC™, XWAY™
Other Trademarks
ARM™, Bluetooth™ of Bluetooth SIG Inc. CAT-iq™ of DECT Forum. eCosCentric®, eCos® and eCosPro® of
eCosCentric Limited. EPCOS™ of Epcos AG. HYPERTERMINAL™ of Hilgraeve Incorporated. IEC™ of
Commission Electrotechnique Internationale. IQfact™ and IQmax™ of LitePoint Corporation. IrDA™ of Infrared
Data Association Corporation. ISO™ of INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.
MATLAB™ of MathWorks, Inc. NUCLEUS™ of Mentor Graphics Corporation. Linux® of Linus Torvalds. MIPS® of
MIPS Technologies, Inc., USA. muRata™ of MURATA MANUFACTURING CO. SOLARIS™ of Sun
Microsystems, Inc. Samtec® of Samtec Inc. TEAKLITE™ of CEVA, Inc. TEKTRONIX™ of Tektronix Inc. UNIX™
of X/Open Company Limited. VERILOG™, PALLADIUM™ of Cadence Design Systems, Inc. VxWorks™, WIND
RIVER™ of WIND RIVER SYSTEMS.
All other trademarks are the property of their respective owners.
Last Trademarks Update 2013-09-20
Getting Started
3
Revision 1.0, 2013-12-11
EASY 7071 Reference Board
Version 2.3.1
Table of Contents
Table of Contents
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1
1.1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Content of the EASY 7071 Reference Board Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2
Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3
3.1
3.2
3.3
Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RGMII and SGMII Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mini USB Device Connector (CON1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connector for 4 Pin UART Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
BOM of EASY 7071 Reference Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
8
8
8
9
Literature References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Getting Started
4
Revision 1.0, 2013-12-11
EASY 7071 Reference Board
Version 2.3.1
Introduction
1
Introduction
This document describes the hardware configuration to get started with the EASY 7071 Reference Board, Version
2.3.1. Please refer to the hardware user’s manual [1] for information about advanced configuration.
1.1
Content of the EASY 7071 Reference Board Kit
The reference kit contains:
•
•
EASY 7071 Reference Board, Version 2.3.1 (see Figure 1)
Power Source: Via mini USB cable
For ordering of EASY 7071 Reference Board Kit, please specify the code “LA000001746”.
Figure 1
EASY 7071 Reference Board, Version 2.3.1
Getting Started
5
Revision 1.0, 2013-12-11
EASY 7071 Reference Board
Version 2.3.1
Block Diagram
2
Block Diagram
Figure 2 shows the block diagram of EASY 7071 Reference Board.
Mini-B USB
Connector
TLV62090
5 Vin
3.3 Vout
3.3 V /
50 mA
3.3 V
ATxmega16A4U-MH
+3.3 V
+3V3_GPHY
XWAY™
TANTOS-2G
Internal 1.5 V
GPHY
Internal 1 V
1.5 V
1V
MDIO
3.3 V /
1V/
200 mA 260 mA
Figure 2
RGMII
25M_OUT
XWAY™ TANTOS-2G
(PSB 6972)
25M_OUT
RGMII
3.3 V / 1.5 V /
150 mA 270 mA
XWAY™
PHY11G
(PEF 7071)
RJ45
XWAY™
PHY11G
(PEF 7071)
GE LAN
Transformer
GE LAN
Transformer
RJ45
SMDIO
3.3 V /
1V/
200 mA 260 mA
Block Diagram of the EASY 7071 Reference Board
The EASY 7071 Reference Board consists of the following blocks:
•
•
•
•
•
•
•
•
•
•
XWAY™ PHY11G (PEF 7071), Version 1.5 devices
2 Giga LAN port (through 5th and 6th ports of XWAY™ TANTOS-2G)
JTAG
UART connectors for XWAY™ PHY11G (PEF 7071) (4 pins connector)
LEDs (controlled by XWAY™ PHY11G)
Atmel® microcontroller (ATxmega16A4U-MH)
Tactile Switch, DIP 4 Pin 90° (Wuerth Elektronik eiSos GmbH)
1000BASE-T; GE LAN Transformer, (Wuerth Elektronik eiSos GmbH)
Connectors (Wuerth Elektronik eiSos GmbH)
– Mini-B USB Connector
– DIP Pin Header 2 x 3, 2.54 mm
– DIP Pin Header 1 x 4, 2.54 mm
– RJ45 1 Port Shielded
Inductors (Wuerth Elektronik eiSos GmbH)
– 600 Ω BEAD 0603
– 120 Ω BEAD 0805
– SMD 4.7 µH 315 mA ±10% 1812 Wound
– SMD 1 µH 5.4 A 20% L= W = 4.8 mm, H = 2 mm
Getting Started
6
Revision 1.0, 2013-12-11
EASY 7071 Reference Board
Version 2.3.1
Block Diagram
•
LEDs (Wuerth Elektronik eiSos GmbH)
– SMD Yellow 0805
– SMD Green 0805
For illustration of the I/O port definition of EASY 7071 Reference Board (Top Layer), see Figure 1.
Table 1 shows LED definition of EASY 7071 Reference Board.
Table 1
LED Definition
LED
Description
Remark
LED1
G0LED0
Controlled by LED0 of first XWAY™ PHY11G (PEF 7071)
LED2
G0LED2
Controlled by LED2 of first XWAY™ PHY11G (PEF 7071)
LED3
G1LED0
Controlled by LED0 of second XWAY™ PHY11G (PEF 7071)
LED4
G1LED2
Controlled by LED2 of second XWAY™ PHY11G (PEF 7071)
Getting Started
7
Revision 1.0, 2013-12-11
EASY 7071 Reference Board
Version 2.3.1
Interface
3
Interface
This chapter describes the interface and header pinouts of EASY 7071 Reference Board, Version 2.3.1.
RGMII and SGMII Interfaces
3.1
In applications using the copper medium, the XWAY™ PHY11G is used to connect a 10/100/1000BASE-T
capable MAC unit to a twisted-pair medium, such as a CAT5 cable infrastructure. The connection between MAC
and PHY can be established using RGMII or SGMII.
In this design, it uses the RGMII interface and 3.3 V.
Controller with
RGMII or SGMII
support
RGMII
or
SGMII
2.5 or 3.3 V
Transformer
RJ45
XWAY™ PHY11G
(PEF 7071)
25 MHz
LEDs
Pin Strapping
RGMII _interface .v sd
Figure 3
RGMII Interface
3.2
Mini USB Device Connector (CON1)
Mini USB device connector is used for connecting to USB Host or USB Hub.
Figure 4
Mini USB Device Connector (Front View)
Table 2 shows the pin definition of CON1.
Table 2
Pin Definition of CON1
Pin Number
Pin Name
Pin Number
Pin Name
1
VCC
2
D-
3
D+
4
GND
5, 6, 7, 8
SHELL
-
-
Getting Started
8
Revision 1.0, 2013-12-11
EASY 7071 Reference Board
Version 2.3.1
Interface
3.3
Connector for 4 Pin UART Module
J5 and J6 are connector for 4 pin UART module.
1
2
3
VDD
Figure 5
LED0
4
GND
Connector for 4 Pin UART Module
Table 3 shows the pin definition of J5 and J6.
Table 3
Pin Definition of J5 and J6
Pin Number
Pin Name
1
Power
2
NC
3
LED0 of XWAY™ PHY11G (PEF 7071)
4
GND
Getting Started
9
Revision 1.0, 2013-12-11
EASY 7071 Reference Board
Version 2.3.1
BOM of EASY 7071 Reference Board
4
BOM of EASY 7071 Reference Board
Table 4 & Table 5 shows the BOM of EASY 7071 Reference Board.
Attention: The Bill of Material contains all components including options of the Lantiq Family Board.
Lantiq's Customer Support team will assist to decide on optimized number of components
based on the target application.
Table 4
BOM
Item
Quantity
Designator
1
21
C1, C40, C41, C43, C44, C50, C51, 100 nF
C53, C54, C55, C58, C75, C76, C78,
C79, C84, C85, C87, C88, C89, C92
2
4
C46, C47, C81, C82
3
5
Value
Manufacturer
TDK
330 pF
C3, C27, C45, C80, C117
TDK
22 µF/1206
1)
TDK
1)
TDK
TDK
4
9
C5, C39, C42, C52, C57, C74, C77,
C86, C91
10 µF/0805
5
4
C6, C12, C19, C35
47 µF/12061)
6
17
C7, C8, C9, C10, C11, C15, C16, C17, 100 nF/0603
C18, C20, C21, C23, C25, C26, C28,
C38, C116
7
4
R3, R4, R5, R6
1)
0 Ω/06031)
8
3
C29, C37, C60
1 nF/1808
9
2
C33, C48
20 pF
TDK
Yageo
1)
Holy Stone Enterprise
Walsin Technology
1)
10
1
C34
10 nF/0603
11
2
C36, C113
10 nF
TDK
12
8
C64, C67, C72, C73, C99, C102,
C107, C108
68 pF
TDK
13
2
C65, C66
33 pF
TDK
14
1
C109
1 nF/2 kV
Yageo
15
1
CON1
Ordering Code: 65100516121
Mini-B USB
Connecter
Wuerth Elektronik eiSos
GmbH
16
1
FB1
Ordering Code: 742792651
600 Ω
Wuerth Elektronik eiSos
GmbH
17
2
FB3, FB4
0 Ω/12061)
Yageo
18
2
L1, L2
Ordering Code: 74279202
120 Ω/BEAD
Wuerth Elektronik eiSos
GmbH
19
2
L3, L4
Ordering Code: 74476604
4.7 µH
Wuerth Elektronik eiSos
GmbH
20
1
L5
Ordering Code: 74408941010
1 µH
Wuerth Elektronik eiSos
GmbH
21
2
LED1, LED3
Ordering Code: 150080YS75000
LED0805 YELLOW
Wuerth Elektronik eiSos
GmbH
22
3
LED2, LED4, LED5
Ordering Code: 150080VS75000
LED0805 GREEN
Wuerth Elektronik eiSos
GmbH
Getting Started
10
TDK
Revision 1.0, 2013-12-11
EASY 7071 Reference Board
Version 2.3.1
BOM of EASY 7071 Reference Board
Table 4
BOM (cont’d)
Item
Quantity
Designator
Value
Manufacturer
23
2
R10, R13
33 Ω
Yageo
24
1
Q2
2SB1386100R
Rohm
25
6
R1, R22, R36, R40, R73, R77
10 kΩ
Yageo
26
1
R7
10 Ω,1%
Yageo
27
2
RP1, RP2
68 Ω
Yageo
28
1
R9
75 Ω
Yageo
29
1
R12
180 Ω
Yageo
30
3
R14, R15, R35
1.5 kΩ
Yageo
31
19
R23, R34, R37, R41, R42, R43, R46, 0 Ω
R47, R48, R60, R64, R71, R78, R79,
R80, R83, R84, R85, R97
Yageo
32
5
R118, R122, R126, R130, R135
330 Ω
Yageo
33
2
R25, R55
10 kΩ
Yageo
34
1
R27
12 kΩ,1%
Yageo
35
4
R28, R32, R65, R69
0 Ω/08051)
Yageo
36
2
R31, R68
5.1 Ω
Yageo
37
2
R33, R70
1 kΩ
Yageo
38
2
R39, R76
510 Ω
Yageo
39
4
R44, R45, R81, R82
16 kΩ,1%
Yageo
40
1
R49
1.78 kΩ,1%
Yageo
41
4
R50, R52, R88, R89
11 kΩ,1%
Yageo
42
8
R56, R57, R58, R59, R93, R94, R95, 75
R96
Yageo
43
1
R86
2.74 kΩ,1%
Yageo
44
1
R99
499 kΩ
Yageo
45
1
R103
470 kΩ,1%
Yageo
46
1
R106
150 kΩ
Yageo
47
6
R115, R16, R51, R54, R87, R91
150 Ω
Yageo
48
1
R137
1 kΩ
Yageo
49
1
U1
ATxmega16A4U-MH Atmel
50
1
U2
XWAY™ TANTOSLantiq
2G (VQFN Package)
51
2
U3, U4
XWAY™ PHY11G
(PEF 7071)
Lantiq
52
1
U5
ESD5V3U2U
Infineon
53
1
U6
TLV62090
Texas Instruments
1) Imperial code for SMD dimensions.
Getting Started
11
Revision 1.0, 2013-12-11
EASY 7071 Reference Board
Version 2.3.1
Literature References
Table 5
DIP
Item
Quantity
Designator
Value
Manufacturer
57
1
J3
Ordering Code: 613 006 211 21
Header 2x3
Wuerth Elektronik eiSos
GmbH
58
3
J4, J5, J6
Ordering Code: 613 004 111 21
Header 1X4
Wuerth Elektronik eiSos
GmbH
59
1
C24
100 µF
Teapo
60
2
J1, J2
Ordering Code: 615008143521
RJ45
Wuerth Elektronik eiSos
GmbH
61
1
SW1
Ordering Code: 431256058716
Reset button
Wuerth Elektronik eiSos
GmbH
62
2
T1, T2
Ordering Code: 7490200136
7490200136
Wuerth Elektronik eiSos
GmbH
63
1
Y3
25 MHz
TXC
Literature References
[1]
XWAY™ PHY11G (PEF 7071) Version 1.5 User’s Manual Hardware Description Revision 2.0, 2012-10-17
Getting Started
12
Revision 1.0, 2013-12-11
www.lantiq.com
Published by Lantiq Deutschland GmbH