CENTER PIN / JACK SIZE MATING POWER PLUG PCL712AS 0.10 (2.5 mm) 761KS12, 761KS15, 761KS17 PCL722AS 0.08 (2.0 mm) S761KS12, S761KS15, S761KS17 767KS12, 767KS15, 767KS17 PART NUMBER PANEL MOUNT SEAL O-RING MATING PLUG SEAL O-RING 0.156 3.96 FLAT WASHER 0.150 3.81 0.062 TYP 1.57 HEX NUT 7/16-32 UN THREAD SLEEVE 0.040 1.02 CL CL 0.156 3.96 SLEEVE SHUNT 1.04 26.3 CENTER PIN/JACK SIZE (SEE TABLE) CENTER PIN RECOMMENDED PCB LAYOUT (COMPONENT SIDE) 0.37 9.4 SLEEVE CENTER PIN SLEEVE SHUNT SLEEVE 0.65 16.5 SCHEMATIC 0.53 13.4 0.62 15.7 CENTER PIN SLEEVE SHUNT 0.440±0.002 11.18±0.05 7/16-32 UN - 2A THREAD MAXIMUM PANEL THICKNESS 0.090 2.29 0.156 3.96 0.509 12.93 RECOMMENDED PANEL MTG HOLE NOTES: CUSTOMER DRAWING 1. HEX NUT, FLAT WASHER, AND PANEL O-RING SUPPLIED UNASSEMBLED 2. DIMENSIONS SHOWN FOR REFERENCE ONLY. 3. MATERIAL: HOUSINGS, HEX NUT - COPPER ALLOY, NICKEL PLATED INSULATOR HOUSING - THERMOPLASTIC O-RINGS - NEOPRENE RUBBER, LUBRICATED WITH SYNTHETIC GREASE TERMINAL INSULATORS - PHENOLIC FLAT WASHER - STEEL, NICKEL PLATED PIN, SPRING, TERMINALS - COPPER ALLOY, SILVER PLATED 4. THIS PRODUCT IS RoHS COMPLIANT THIS DRAWING DESCRIBES A DESIGN CONSIDERED PROPRIETARY IN NATURE, DEVELOPED AND MANUFACTURED BY SWITCHCRAFT INC. AND IS RELEASED ON A CONFIDENTIAL BASIS FOR IDENTIFICATION PURPOSES ONLY. UNLESS OTHERWISE SPECIFIED 1. ALL DIMENSIONS IN INCHES SIZE WIDTH FINISH - TWO PLACE DECIMALS 0.02 - THREE PLACE DECIMALS 0.005 SPEC No. FIRST USED ON 27029 10/01/12 BL TJK DATE DRAWN A 26591 8/6/10 RS TJK 7/23/09 ECO NUMBER DATE REVISIONS BY APVD DO NOT SCALE DRAWING SolidWorks CAD File NAME B LBS/M TEMPER * MATERIAL B REV MULT BY PNK SPEC No. SCALE 2:1 CHKD RS 8/6/10 APVD TJK 8/6/10 SEALED POWER JACKS STRAIGHT PC, RoHS SHEET PART No. 1 OF 1 PCL712AS, PCL722AS REV B