IDT74ALVCH16245 3.3V CMOS 16-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS INDUSTRIAL TEMPERATURE RANGE 3.3V CMOS 16-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS AND BUS-HOLD FEATURES: IDT74ALVCH16245 DESCRIPTION: • 0.5 MICRON CMOS Technology • Typical tSK(o) (Output Skew) < 250ps • ESD > 2000V per MIL-STD-883, Method 3015; > 200V using machine model (C = 200pF, R = 0) • VCC = 3.3V ± 0.3V, Normal Range • VCC = 2.7V to 3.6V, Extended Range • VCC = 2.5V ± 0.2V µ W typ. static) • CMOS power levels (0.4µ • Rail-to-Rail output swing for increased noise margin • Available in SSOP, TSSOP, and TVSOP packages This 16-bit bus transceiver is built using advanced dual metal CMOS technology. The ALVCH16245 is designed for asynchronous communication between data buses. The control-function implementation minimizes external timing requirements. This device can be used as two 8-bit transceivers or one 16-bit transceiver. It allows data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the device so that the buses are effectively isolated. The ALVCH16245 has been designed with a ±24mA output driver. This driver is capable of driving a moderate to heavy load while maintaining speed performance. The ALVCH16245 has “bus-hold” which retains the inputs’ last state whenever the input bus goes to a high impedance. This prevents floating inputs and eliminates the need for pull-up/down resistors. DRIVE FEATURES: • High Output Drivers: ±24mA • Suitable for heavy loads APPLICATIONS: • 3.3V high speed systems • 3.3V and lower voltage computing systems FUNCTIONAL BLOCK DIAGRAM 1DIR 1 2DIR 48 1A1 1A2 2A1 2A2 2A3 5 1A4 1A5 1A6 1A7 1A8 17 2A5 2A6 2A7 2B5 20 2B6 22 2A8 12 19 27 1B7 37 2B7 26 23 1B8 2B4 29 1B6 38 2B3 30 1B5 40 11 2B2 32 1B4 41 9 14 16 2A4 8 2B1 33 1B3 43 6 13 35 1B2 44 2OE 36 1B1 46 3 1A3 25 1OE 47 2 24 2B8 The IDT logo is a registered trademark of Integrated Device Technology, Inc. INDUSTRIAL TEMPERATURE RANGE MARCH 1999 1 © 1999 Integrated Device Technology, Inc. DSC-4697/1 IDT74ALVCH16245 3.3V CMOS 16-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS INDUSTRIAL TEMPERATURE RANGE ABSOLUTE MAXIMUM RATINGS(1) PIN CONFIGURATION Symbol Description VTERM(2) Max Unit Terminal Voltage with Respect to GND –0.5 to +4.6 V VTERM(3) Terminal Voltage with Respect to GND –0.5 to VCC+0.5 V °C 1DIR 1 48 1OE 2 TSTG Storage Temperature –65 to +150 1B1 47 1A1 IOUT DC Output Current –50 to +50 mA 1B2 3 46 1A2 IIK ±50 mA GND 4 45 Continuous Clamp Current, VI < 0 or VI > VCC GND IOK Continuous Clamp Current, VO < 0 –50 mA 1B3 5 44 1A3 mA 1A4 Continuous Current through each VCC or GND ±100 43 ICC ISS 1B4 6 VCC 7 42 VCC 1B5 8 41 1A5 1B6 9 40 1A6 GND 10 39 GND 1B7 11 38 1A7 1B8 12 37 1A8 2B1 13 36 2A1 NOTES: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. 2. VCC terminals. 3. All terminals except VCC. CAPACITANCE (TA = +25°C, F = 1.0MHz) Parameter(1) Symbol Conditions Typ. Max. Unit CIN Input Capacitance VIN = 0V 5 7 pF COUT Output Capacitance VOUT = 0V 7 9 pF CI/O I/O Port Capacitance VIN = 0V 7 9 pF 2B2 14 35 2A2 GND 15 34 GND 2B3 16 33 2A3 2B4 17 32 2A4 VCC 18 31 VCC 2B5 19 30 2A5 2B6 20 29 2A6 xOE Output Enable Inputs (Active LOW) GND 21 28 GND DIR Direction Control Inputs 2B7 22 27 2A7 xAx Side A Inputs or 3-State Outputs(1) 2B8 23 26 2A8 xBx Side B Inputs or 3-State Outputs(1) 2DIR 24 25 2OE NOTE: 1. As applicable to the device type. PIN DESCRIPTION Pin Names Description NOTE: 1. These pins have "Bus-Hold". All other pins are standard inputs, outputs, or I/Os. SSOP/ TSSOP/ TVSOP TOP VIEW FUNCTION TABLE (EACH 8-BIT SECTION)(1) Inputs xOE xDIR L L Bus B Data to Bus A L H Bus A Data to Bus B H X High Z state NOTE: 1. H = HIGH Voltage Level L = LOW Voltage Level X = Don’t Care 2 Outputs IDT74ALVCH16245 3.3V CMOS 16-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS INDUSTRIAL TEMPERATURE RANGE DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE Following Conditions Apply Unless Otherwise Specified: Operating Condition: TA = –40°C to +85°C Symbol VIH VIL Min. Typ.(1) Max. Unit VCC = 2.3V to 2.7V 1.7 — — V VCC = 2.7V to 3.6V 2 — — VCC = 2.3V to 2.7V — — 0.7 VCC = 2.7V to 3.6V — — 0.8 Parameter Input HIGH Voltage Level Input LOW Voltage Level Test Conditions V IIH Input HIGH Current VCC = 3.6V VI = VCC — — ±5 µA IIL Input LOW Current VCC = 3.6V VI = GND — — ±5 µA IOZH High Impedance Output Current VCC = 3.6V VO = VCC — — ±10 µA IOZL (3-State Output pins) VO = GND — — ±10 VIK Clamp Diode Voltage VCC = 2.3V, IIN = –18mA — –0.7 –1.2 V VH ICCL ICCH ICCZ ∆ICC Input Hysteresis Quiescent Power Supply Current VCC = 3.3V VCC = 3.6V VIN = GND or VCC — — 100 0.1 — 40 mV µA Quiescent Power Supply Current Variation One input at VCC - 0.6V, other inputs at VCC or GND — — 750 µA Min. Typ.(2) Max. Unit – 75 — — µA VI = 0.8V 75 — — VI = 1.7V – 45 — — 45 — — — ±500 NOTE: 1. Typical values are at VCC = 3.3V, +25°C ambient. BUS-HOLD CHARACTERISTICS Symbol IBHH Parameter(1) Test Conditions Bus-Hold Input Sustain Current VCC = 3V Bus-Hold Input Sustain Current VCC = 2.3V Bus-Hold Input Overdrive Current VCC = 3.6V VI = 2V IBHL IBHH IBHL IBHHO VI = 0.7V VI = 0 to 3.6V IBHLO NOTES: 1. Pins with Bus-Hold are identified in the pin description. 2. Typical values are at VCC = 3.3V, +25°C ambient. 3 — µA µA IDT74ALVCH16245 3.3V CMOS 16-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS INDUSTRIAL TEMPERATURE RANGE OUTPUT DRIVE CHARACTERISTICS Symbol VOH Test Conditions(1) Parameter Output HIGH Voltage Min. Max. Unit VCC – 0.2 — V IOH = – 6mA 2 — IOH = – 12mA 1.7 — 2.2 — VCC = 2.3V to 3.6V IOH = – 0.1mA VCC = 2.3V VCC = 2.3V VCC = 2.7V VCC = 3V VOL Output LOW Voltage 2.4 — VCC = 3V IOH = – 24mA 2 — VCC = 2.3V to 3.6V IOL = 0.1mA — 0.2 VCC = 2.3V IOL = 6mA — 0.4 IOL = 12mA — 0.7 VCC = 2.7V IOL = 12mA — 0.4 VCC = 3V IOL = 24mA — 0.55 V NOTE: 1. VIH and VIL must be within the min. or max. range shown in the DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE table for the appropriate VCC range. TA = – 40°C to + 85°C. OPERATING CHARACTERISTICS, TA = 25°C Symbol Parameter CPD Power Dissipation Capacitance Outputs enabled CPD Power Dissipation Capacitance Outputs disabled VCC = 2.5V ± 0.2V VCC = 3.3V ± 0.3V Test Conditions Typical Typical Unit CL = 0pF, f = 10Mhz 22 29 pF 4 5 SWITCHING CHARACTERISTICS(1) VCC = 2.5V ± 0.2V Symbol Parameter tPLH Propagation Delay tPHL xAx to xYx tPZH Output Enable Time tPZL xOE to xYx tPHZ Output Disable Time tPLZ xOE to xYx tSK(o) Output Skew(2) VCC = 2.7V VCC = 3.3V ± 0.3V Min. Max. Min. Max. Min. Max. Unit 1 3.7 — 3.6 1 3 ns 1 5.7 — 5.4 1 4.4 ns 1 5.2 — 4.6 1 4.1 ns — — — — — 500 ps NOTES: 1. See TEST CIRCUITS AND WAVEFORMS. TA = – 40°C to + 85°C. 2. Skew between any two outputs of the same package and switching in the same direction. 4 IDT74ALVCH16245 3.3V CMOS 16-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS INDUSTRIAL TEMPERATURE RANGE TEST CIRCUITS AND WAVEFORMS TEST CONDITIONS VCC(1)= 3.3V±0.3V VCC(1)= 2.7V Symbol VCC(2)= 2.5V±0.2V Unit VLOAD 6 6 2 x Vcc V VIH 2.7 2.7 Vcc V VT 1.5 1.5 Vcc / 2 V VLZ 300 300 150 mV VHZ 300 300 150 mV CL 50 50 30 pF (1, 2) tPHL V IH VT 0V ALVC Link DISABLE ENABLE CONTROL INPUT GND tPZL D.U.T. OUTPUT SWITCH NORMALLY CLOSED LOW tPZH OUTPUT SWITCH NORMALLY OPEN HIGH 500 Ω RT t PLH CL ALVC Link Test Circuit for All Outputs V OH VT V OL Propagation Delay V OUT Pulse Generator t PHL OPPOSITE PHASE INPUT TRANSITION Open 500 Ω tPLH OUTPUT V LOAD V CC V IN V IH VT 0V SAME PHASE INPUT TRANSITION tPLZ V IH VT 0V V LOAD/2 V LOAD/2 VT V LZ V OL tPHZ VT V OH V HZ 0V 0V ALVC Link DEFINITIONS: CL = Load capacitance: includes jig and probe capacitance. RT = Termination resistance: should be equal to ZOUT of the Pulse Generator. Enable and Disable Times NOTE: 1. Diagram shown for input Control Enable-LOW and input Control Disable-HIGH. V IH DATA VT INPUT 0V tSU tH V IH TIMING VT INPUT 0V tREM V IH ASYNCHRONOUS VT CONTROL 0V V IH SYNCHRONOUS VT CONTROL tSU 0V tH NOTES: 1. Pulse Generator for All Pulses: Rate ≤ 1.0MHz; tF ≤ 2.5ns; tR ≤ 2.5ns. 2. Pulse Generator for All Pulses: Rate ≤ 1.0MHz; tF ≤ 2ns; tR ≤ 2ns. SWITCH POSITION Test Switch Open Drain Disable Low Enable Low VLOAD Disable High Enable High GND All Other Tests Open ALVC Link Set-up, Hold, and Release Times V IH INPUT VT 0V tPHL1 tPLH1 V OH OUTPUT 1 tSK (x) LOW-HIGH-LOW PULSE VT V OL tSK (x) tW V OH VT V OL OUTPUT 2 VT HIGH-LOW-HIGH PULSE VT ALVC Link tPLH2 tPHL2 Pulse Width tSK (x) = tPLH2 - tPLH1 or tPHL2 - tPHL1 Output Skew - tSK(X) ALVC Link NOTES: 1. For tSK(o) OUTPUT1 and OUTPUT2 are any two outputs. 2. For tSK(b) OUTPUT1 and OUTPUT2 are in the same bank. 5 IDT74ALVCH16245 3.3V CMOS 16-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS INDUSTRIAL TEMPERATURE RANGE ORDERING INFORMATION IDT XX ALVC X Bus-Hold Temp. Range XX Family XX XXX Device Type Package CORPORATE HEADQUARTERS 2975 Stender Way Santa Clara, CA 95054 PV PA PF Shrink Small Outline Package Thin Shrink Small Outline Package Thin Very Small Outline Package 245 16-Bit Bus Transceiver with 3-State Outputs 16 Double-Density, ±24mA H Bus-Hold 74 –40°C to +85°C for SALES: 800-345-7015 or 408-727-6116 fax: 408-492-8674 www.idt.com 6 for Tech Support: [email protected] (408) 654-6459