Model # QBH-860 RF/Microwave Amplifier Features • Wide Frequency Range: 1 – 1200 MHz • Higher Output Power: +19 dBm • Environmental Screening Available Technical Specifications Characteristic Absolute Maximum (No Damage) Ratings Typical Min/Max 0ºC to +65 ºC 1 – 1200 MHz 1 – 1200 MHz 16.5 13 Min. Gain Flatness (dB) +/- 2.0 --- Noise Figure (dB) 3.4 5.0 Max. Power Out @1 dB Compression (dBm) +19 +18 Min. 3rd Order Intercept (dBm) +30 --- 2nd Order Intercept (dBm) +45 --- Reverse Isolation (dB) 18 --- In 1.2:1 1.5:1 Max. Out 2.4:1 2.7:1 Max. DC Current (mA) +110 +110 Max. DC Voltage (V) +15 +15 Frequency (MHz) Gain (dB) VSWR Sustained Voltage (Vdc) +17 volts Pulsed (Transient) Voltage (V) +17 volts Operating Temperature -55 to +125 °C Storage Temperature -65 to +150 °C Maximum Input Drive (Vrms) +7.0 Thermal Rise, Junction-Case +45 °C Note: • • • Specifications are guaranteed when tested in a 50 Ohm system. Specifications indicated as typical are not guaranteed. Outline drawing below to be used as reference only. Outline Drawing (TO-8) Linear S-Parameter Data Rev Date: 7/24/2014 © API Technologies Corp. Proprietary Information Page # 1 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected] Model # QBH-860 Typical Performance Data Rev Date: 7/24/2014 © API Technologies Corp. Proprietary Information Page # 2 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected]