ASMIR

Components
Power tool with infrared interface
Motive format alignment AccuDrive
ASMIR
Features
–– Brushless industrial power tool
–– With integrated rotation speed electronics
–– Torque <12 Nm (breakaway torque)
–– Communication via infrared interface
ASMIR with N 153
Technical data - power tool
Technical data - charger
Operating speed
≤90 rpm (highspeed)
≤12 rpm (slowspeed)
Voltage supply
230 VAC (ASMIR.A01)
110 VAC (ASMIR.A02)
Torque
<12 Nm (breakaway torque)
Power frequency
50 / 60 Hz
Tool fitting
Hexagon socket 1/4"
Power consumption
100 W
Interface
Infrared
Battery type
NiMH
Transmission range
Max. 100 mm
Charge current
≤5000 mAh
Transmission angle
Max. 60°
Duration of charge
20...60 min
Protection DIN EN 60529
IP 20
Ambient temperature
0...+45 °C
Operating temperature
-10...+50 °C
Weight approx.
700 g
Weight approx.
1400 g
Material
Housing: plastic, blue RAL 5002
12 VDC
Battery type
NiMH
Battery capacity
2000 mAh
Weight approx.
550 g
www.baumer.com/motion
14/5/2014
1
Voltage supply
Subject to modification in technic and design. Errors and omissions excepted.
Technical data - batterie pack
Components
Power tool with infrared interface
Motive format alignment AccuDrive
ASMIR
Part number
Description
AccuDrive is an economical system for mobile, motive
format alignment. By AccuDrive shaft positioning to the
desired format is quick, accurate and less fussy hand crank
operations. The electrically commutated professional power
tool ASMIR serves as mobile actuator that communicates
with N 153 and N 143 spindle position displays by infrared
interface where it gets information from relating to positioning direction (clockwise/ counterclockwise) and the signals
for high speed gear, inching and stop.
The user is guided by two status LEDs (red and green)
provided at the spindle position displays that also optionally
indicate current status and order of positioning.
ASMIR.
Design
A01 Power tool with 230 VAC charger
in plastic case
A02 Power tool with 110 VAC charger
in plastic case
Scope of delivery
- Power tool with infrared interface
- In plastic case
- Charger with two power packs
2
www.baumer.com/motion
14/5/2014
Subject to modification in technic and design. Errors and omissions excepted.
- Drill bit:
1/4 inch external hexagon head with
output 1/4 inch external square head
Similar pages