Model # TN3122 Available as: TN3122; 4 Pin .450” sq. Surfacemount (SM3) BX3122: SMA Connectorized Housing (H1) RF/Microwave Amplifier Features • No Additional Circuitry Needed, Internal Blocking Caps Included • Unconditionally Stable • Modifications Available at No Additional Charge • Environmental Screening Available Technical Specifications Parameter Absolute Maximum Ratings Typical Min/Max 2500 MHz – 4500 MHz 2500 MHz - 4500 MHz Gain 10 dB 8 dB Noise Figure 2.75 dB 4 dB Output Power @ 1 dB Compression +19 dBm +17 dBm Output 3rd Order Intercept +30 dBm --- +40 dBm --- Reverse Isolation 24 dB --- Input VSWR 1.5:1 2.0:1 Output VSWR 1.5:1 2.0:1 Supply Voltage 15 volts 15 volts Supply Current 75 mA 100 mA Frequency Range Output 2nd Order Intercept Maximum (No Damage) Ratings Storage Temperature -62°C to +125°C Operating Temperature -55°C to +125°C Case Temperature +125°C DC Voltage @ 25°C + 18 volts Continuous RF Input Power + 13 dBm Short Term RF Input Power 50 Milliwatts (1 Minute Max.) 0.2 Watt (3 μsec Max.) Maximum Peak Power * Typical values are measured at 25°C, but not guaranteed. Outline Drawing (For reference only) Grounding Instructions Care should be taken to effectively ground each unit. Revisions API reserves the right to make revisions to both product and/or the information contained within their datasheets without advanced notice. Min./Max. Values Specifications are guaranteed when tested in a 50 Ω (ohm) system. Rev Date: 9/18/2015 © API Technologies Corp. Proprietary Information Page # 1 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected] Model # TN3122 Typical Performance Graphs Rev Date: 9/18/2015 © API Technologies Corp. Proprietary Information Page # 2 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected] Model # TN3122 Instructions Grounding Instructions Care should be taken to effectively ground each unit. Revisions API reserves the right to make revisions to both product and/or the information contained within their datasheets without advanced notice. Min./Max. Values Specifications are guaranteed when tested in a 50 Ω (ohm) system. Typical performance graphs and values are measured at 25°C, but not guaranteed. Outline Drawing (For reference only) Rev Date: 9/18/2015 © API Technologies Corp. Proprietary Information Page # 3 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected]