Model # BX9885 Preliminary RF/Microwave Amplifier Frequency Range: 1500 to 2500 MHz Features • Laser Sealed Housing • No External Circuitry Needed • RoHS Compliant Model Available • Unconditionally Stable • EAR99 Model BX9885 is an RF amplifier covering 1500 to 2500 MHz. This design utilizes a laser sealed housing for superior environmental protection. All specification ratings are based on measurements in a 50 Ω (ohm) system with a DC supply voltage tolerance of +/- 2%. Typical Intermodulation Performance at 25 ºC Technical Specifications Parameter Unit Typical Min/Max Frequency Range MHz 1500 to 2500 1500 to 2500 Gain dB 16 14 (Min), 18 (Max) Noise Figure dB 2.0 3.0 dBm 22 20 Reverse Isolation dB -20 --- Input VSWR --- 1.5:1 2.0:1 Output VSWR --- 1.5:1 2.0:1 Supply Voltage volts +15 +15 Supply Current mA 110 125 Output Power @ 1 dB Compression Third Order Two Tone Intercept Point: Note: Intercept values measured at 2000 MHz. Absolute Maximum (No Damage) Ratings Mechanical & Electrical Parameter Specification Temperatures (Min/Max) Specification -20°C to +70°C Housing Size 1.58” L x 0.82” W x 0.44” H Housing Drawing H1L Package RF Connectors SMA Female Replaceable Connectors Operating Temperature -55ºC to +100 ºC Storage Temperature -62ºC to +125ºC Case Temperature +125 ºC DC Voltage +18 Volts Continuous RF Input Power +13 dBm Short Term RF Input Power 200 Milliwatts (1 Minute Max.) Maximum Peak Power 0.5 Watt (3 µsec Max.) Rev Date: 12/2/2015 © API Technologies Corp. Proprietary Information +33 dBm (Typ.) Page # 1 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected]