Model # BXHF1203 High Frequency Microwave Amplifier Frequency Range: 2-18 GHz Features • High Frequency and Broad Bandwidth: 2-18 GHz • Low Noise Figure: 3.5 dB Typical • Internal Voltage Regulator • Low Phase Noise Performance • EAR99 and RoHS Compliant Model BXHF1203 is a high frequency amplifier covering 2-18 GHz. This design utilizes a laser sealed housing for superior environmental protection. This standard design may also be ordered in a screened MIL-STD-883 version (Model #SXHF1203) All specification ratings are based on measurements in a 50 Ω (ohm) system with a DC supply voltage tolerance of +/- 2%. Technical Specifications Maximum Ratings Parameter Unit Typical Min/Max Frequency Range GHz 2 to 18 2 to 18 Gain dB 46 Noise Figure dB Output Power @ 1 dB Compression** Output 3rd Order Intercept Maximum (No Damage) Ratings Storage Temperature -55°C to +85°C 43 Operating Temperature -40°C to +85°C 3.5 5.0 DC Voltage @ 25°C +18 volts dBm 28 25 Input Drive @ 25°C (CW) +13 dBm dBm 32 - Reverse Isolation dB 65 - Input VSWR --- 1.5:1 2.0:1 Output VSWR --- 1.5:1 2.0:1 Supply Voltage volts +15 +15 Supply Current mA 650 700 • Typical values are measured at 25°C, but not guaranteed. • Min/Max values are guaranteed from -20°C to 70°C. Mechanical & Electrical Parameter Specification Specification Temperatures (Min/Max) -20°C to +70°C Housing Size 2.37” x 1.06” x 0.30” Housing Drawing HF3 Package RF Connectors SMA Female Replaceable Connectors Rev Date: 11/17/2015 © API Technologies Corp. Proprietary Information Page # 1 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected] Model # BXHF1203 Typical Performance Graphs Rev Date: © API Technologies Corp. Proprietary Information Page # | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected] Model # BXHF1203 Instructions Grounding Instructions Care should be taken to effectively ground each unit. Revisions API reserves the right to make revisions to both product and/or the information contained within their datasheets without advanced notice. Min./Max. Values Specifications are guaranteed when tested in a 50 Ω (ohm) system. Typical performance graphs and values are measured at 25°C, but not guaranteed. Outline Drawing (for reference only) Rev Date: 11/17/2015 © API Technologies Corp. Proprietary Information Page # 3 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected]