Model # BXHF1099 Standard High Frequency Microwave Amplifier Frequency Range: 10-15 GHz Features • High Frequency and Broad Bandwidth: 10-15 GHz • High Gain: 31 dB Typical • Laser Welded Housing for Ultimate Environmental Protection Model BXHF1099 is a high frequency amplifier covering 10-15 GHz. This design utilizes a laser sealed housing for superior environmental protection. This standard design may also be ordered in a screened MIL-STD-883 version (Model #SXHF1099.) All specification ratings are based on measurements in a 50 Ω (ohm) system with a DC supply voltage tolerance of +/- 2%. Technical Specifications Maximum Ratings Parameter Unit Typical Min/Max Frequency Range GHz 10-15 10-15 Gain dB 31 (+/- 1 dB) 30 (+/- 1 dB) Noise Figure dB 2.5 3.0 DC Voltage @ 25°C +18 volts Output Power @ 1 dB Compression dBm 11 10 Input Drive @ 25°C (CW) +13 dBm Output 3rd Order Intercept dBm 18 - Output 2nd Order Intercept dBm 23 - Reverse Isolation dB 50 - Input VSWR --- 1.5:1 1.8:1 Output VSWR --- 1.5:1 1.8:1 Supply Voltage volts +15 +15 Supply Current mA 175 225 Maximum (No Damage) Ratings Storage Temperature -55°C to +85°C Operating Temperature -40°C to +85°C * Typical values are measured at 25°C, but not guaranteed. Mechanical & Electrical Parameter Specification Specification Temperatures (Min/Max) 0°C to +50°C Housing Size 1.500” L x 1.060” W x 0.300” H Housing Drawing HF2 Package RF Connectors SMA Female Replaceable Connectors Rev Date: 3/10/2014 © API Technologies Corp. Proprietary Information Page # 1 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected]