Model # BXHF1206 High Frequency Microwave Amplifier Frequency Range: 3 GHz to 5 GHz Features Features • High Linearity: IP2 47 dBm • High Gain: 36 dBm • Laser Welded Housings for Ultimate Environmental Protection • RoHS Compliant Option: Model BXHF1206LF Drop-in Axial Leaded Package Model BXHF1206 is a high frequency amplifier covering 3000-5000 MHz. This design utilizes a laser sealed hermetic housing for superior environmental protection. This standard design may also be ordered in a screened MIL-STD-883 version (Model #SXHF1206). All specification ratings are based on measurements in a 50 Ω (ohm) system with a dc supply voltage tolerance of +/- 0.5 volts. Technical Specifications Maximum Ratings Parameter Typical Min/Max 3000 to 5000 MHz 3000 to 5000 MHz Gain 36 dB 35 dB (Min) Noise Figure 4.0 dB 5.0 dB (Max) DC Voltage @ 25°C +18 volts Output Power @ 1 dB Compression 26 dBm 25 dBm (Min) Input Drive @ 25°C (CW) +13 dBm Output 3rd Order Intercept 37 dBm --- 47 dBm --- Reverse Isolation 45 dB --- Input VSWR 1.7:1 2.0:1 (Max) Output VSWR 1.7:1 2.0:1 (Max) Supply Voltage +15 volts 15 volts Supply Current 475 mA 500 mA (Max) Frequency Range Output 2nd Order Intercept Maximum (No Damage) Ratings Storage Temperature -62°C to +90°C Operating Temperature -55°C to +85°C • Typical values are measured at 25°C, but not guaranteed. Mechanical & Electrical Parameter Specification Specification Temperatures (Min/Max) -20°C to +70°C Housing Size 1.36” L x 0.660” W x 0.33” H Housing Drawing H2L Package RF Connectors SMA Female Replaceable Connectors Rev Date: 4/29/2015 © API Technologies Corp. Proprietary Information Page # 1 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected] Model # BXHF1206 Typical Performance Graphs Rev Date: 4/29/2015 © API Technologies Corp. Proprietary Information Page # 2 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected] Model # BXHF1206 Instructions Grounding Instructions Care should be taken to effectively ground each unit. Revisions API reserves the right to make revisions to both product and/or the information contained within their datasheets without advanced notice. Min./Max. Values Specifications are guaranteed when tested in a 50 Ω (ohm) system. Typical performance graphs and values are measured at 25°C, but not guaranteed. Outline Drawing (H2L) (For reference only) Rev Date: 4/29/2015 © API Technologies Corp. Proprietary Information Page # 3 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected]