Model # BXHF1215 High Frequency Microwave Amplifier Frequency Range: 4-10 GHz Features • High Frequency and Broad Bandwidth: 4-10 GHz • Low Noise Figure: 1.8 dB Typical • Laser Welded Housing for Ultimate Environmental Protection • Internal Voltage Regulator • RoHS Compliant Option (Model BXHF1215LF) Model BXHF1215 is a high frequency amplifier covering 4-10 GHz. This design utilizes a laser sealed housing for superior environmental protection. This standard design may also be ordered in a screened MIL-STD-883 version (Model #SXHF1215.) All specification ratings are based on measurements in a 50 Ω (ohm) system with a DC supply voltage tolerance of +/- 2%. Technical Specifications Maximum Ratings Parameter Unit Typical Min/Max Frequency Range GHz 4-10 4-10 Gain dB 40 Noise Figure dB Output Power @ 1 dB Compression Maximum (No Damage) Ratings Storage Temperature -55°C to +85°C 39 Operating Temperature -40°C to +85°C 1.8 2.5 DC Voltage @ 25°C +15 volts dBm 17 16 Input Drive @ 25°C (CW) +13 dBm Output 3rd Order Intercept dBm 25 - Output 2nd Order Intercept dBm 31 - Reverse Isolation dB 50 - Input VSWR --- 1.5:1 2.0:1 Output VSWR --- 1.5:1 2.0:1 Supply Voltage volts +12 +12 Supply Current mA 220 240 * Typical values are measured at 25°C, but not guaranteed. Mechanical & Electrical Parameter Specification Specification Temperatures (Min/Max) -20°C to +70°C Housing Size 2.370” L x 1.060” W x 0.300” H Housing Drawing HF3 Package RF Connectors SMA Female Replaceable Connectors Rev Date: 3/9/2015 © API Technologies Corp. Proprietary Information Page # 1 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected] Model # BXHF1215 Typical Performance Graphs Rev Date: © API Technologies Corp. Proprietary Information Page # | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected] Model # BXHF1215 Instructions Grounding Instructions Care should be taken to effectively ground each unit. Revisions API reserves the right to make revisions to both product and/or the information contained within their datasheets without advanced notice. Min./Max. Values Specifications are guaranteed when tested in a 50 Ω (ohm) system. Typical performance graphs and values are measured at 25°C, but not guaranteed. Outline Drawing Rev Date: 3/9/2015 © API Technologies Corp. Proprietary Information Page # 3 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected]