qbh-141.pdf

Available as:
RF AMPLIFIER
MODEL QBH-141
QBH-141, 4 Pin TO-8 (T4)
QBH-9-141, SMA Connectorized Housing (H1)
Features
Typical Intermodulation Performance at 25 º C
n
n
n
n
Second Order Harmonic Intercept Point ...... +30 dBm (Typ.)
Second Order Two Tone Intercept Point ....... +26 dBm (Typ.)
Third Order Two Tone Intercept Point ........... +20 dBm (Typ.)
High Gain: +19.5 dB Typical
Low Noise: 2.9 dB Typical
Operating Temp. - 55 ºC to +85 ºC
Environmental Screening Available
Maximum (No Damage) Ratings
Specifications
CHARACTERISTIC
Frequency
Gain (dB)
Power @ 1 dB
Comp. (dBm)
Reverse
Isolation (dB)
VSWR
In
Out
Noise figure (dB)
Power
Vdc
mA
TYPICAL
Ta= 25 ºC
10 - 300 MHz
MIN/MAX
Ta = -55 ºC to +85 ºC
10 - 300 MHz
19.5
19 Min.
+7.5
+6.5 Min.
-23
1.50:1
1.60:1
2.9
1.75:1 Max.
1.75:1 Max.
3.3 Max.
+15
15
+15
20 Max.
Ambient Operating Temperature .............. -55ºC to + 100 ºC
Storage Temperature ............................... -62ºC to + 125 ºC
Case Temperature ................................................. + 125 ºC
DC Voltage ......................................................... + 18 Volts
Continuous RF Input Power ................................. + 13 dBm
Short Term RF Input Power.......50 Milliwatts (1 Minute Max.)
Maximum Peak Power ................... 0.5 Watt (3 µsec Max.)
Note: Care should always be taken to effectively ground the case of each unit.
Revision 3/27/2013
Typical Performance Data
Reverse Isolation (dB)
Gain (dB)
23
0
Noise Figure (dB)
22
- 10
5
4
21
- 20
3
20
- 30
2
19
1
- 40
Start 10 MHz
1 dB Comp. (dBm)
+10
Start 10 MHz
Stop 300 MHz
Stop 300 MHz
Stop 300 MHz
Output VSWR
Input VSWR
2.0
Start 10 MHz
2.0
+9
1.5
+8
1.5
+7
1.0
+6
Start 10 MHz
Stop 300 MHz
Legend
1.0
Start 10 MHz
+ 25 ºC
Stop 300 MHz
Start 10 MHz
Stop 300 MHz
+ 85 ºC - - - - - - -55 ºC
Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, Florida 32905 · PH (888) 553-7531 · Fax (888) 553-7532
www.SpectrumMicrowave.com Spectrum Microwave · 2707 Black Lake Place · Philadelphia, Pa. 19154 · PH (215) 464-4000 · Fax (215) 464-4001