Model # BXHF1241 High Frequency Microwave Amplifier Frequency Range: 1000 – 5000 MHz Features • Two Stage Design • Laser Welded Housing for Ultimate Environmental Protection • Low Noise Figure • No External Block Caps needed Model BXHF1241 is a high frequency amplifier covering 1-5 GHz. This design utilizes a laser sealed housing for superior environmental protection. All specification ratings are based on measurements in a 50 Ω (ohm) system with a DC supply voltage tolerance of +/- 2%. Absolute Maximum (No Damage) Ratings Technical Specifications Parameter Unit Typical Min/Max Frequency Range GHz 1 to 5 1 to 5 Gain dB 21.5 20 Noise Figure dB 2.5 4.0 Output Power @ 1 dB Compression dBm 21 19 Third Order Intercept dBm 33 --- Reverse Isolation dB 50 --- Input VSWR --- 1.5:1 2.0:1 Output VSWR** --- 1.5:1 2.0:1 Supply Voltage volts +15 +15 Supply Current mA 260 280 Operating Temperature -55ºC to +100 ºC Storage Temperature -62ºC to +125ºC Case Temperature +125 ºC DC Voltage +18 Volts Continuous RF Input Power +13 dBm Short Term RF Input Power 200 Milliwatts (1 Minute Max.) Maximum Peak Power 0.5 Watt (3 µsec Max.) Note: Always use a 50 ohm output termination. Mechanical & Electrical Parameter Specification Specification Temperatures (Min/Max) -20°C to +70°C Housing Size 1.36” L x 0.66” W x 0.33” H Housing Drawing Customized H2L Package RF Connectors SMA Female Replaceable Connectors Rev Date: 4/25/2016 © API Technologies Corp. Proprietary Information Page # 1 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected] Model # BXHF1241 Typical Performance Graphs Rev Date: 4/25/2016 © API Technologies Corp. Proprietary Information Page # 2 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected] Model # BXHF1241 Instructions Grounding Instructions Care should be taken to effectively ground each unit. Revisions API reserves the right to make revisions to both product and/or the information contained within their datasheets without advanced notice. Min./Max. Values Specifications are guaranteed when tested in a 50 Ω (ohm) system. Typical performance graphs and values are measured at 25°C, but not guaranteed. Outline Drawing (H2L) (For reference only) Rev Date: 4/25/2016 © API Technologies Corp. Proprietary Information Page # 3 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected]