V i s hay I n tertech n o l o g y, I n c . I INNOVAT AND TEC O L OGY For Commercial Applications N HN Surface-Mount Power Inductors O 19 62-2012 Inductors - IHLP® Series Surface-Mount Power Inductors for Commercial Applications IHLP-1212AB-11 IHLP-2525EZ-01 IHLP-1212AE-11 IHLM-2525CZ-01 IHLP-1212BZ-11 IHLM-2525CZ-06 IHLP-1616AB-01 IHLM-2525CZ-07 IHLP-1616AB-11 IHLP-4040DZ-01 IHLP-1616BZ-01 IHLP-4040DZ-11 IHLP-1616BZ-11 IHLP-5050CE-01 IHLP-2020BZ-01 IHLP-5050CE-06 IHLP-2020BZ-11 IHLP-5050CE-07 IHLP-2020CZ-01 IHLP-5050EZ-01 IHLP-2020CZ-11 IHLP-5050FD-01 IHLP-2525AH-01 IHLP-6767DZ-01 IHLP-2525BD-01 IHLP-6767DZ-11 IHLP-2525CZ-01 IHLP-6767GZ-01 IHLP-2525CZ-11 IHLP-6767GZ-11 IHLP-2525CZ-06 I H LW - 4 0 4 0 C F - 1 1 IHLP-2525CZ-07 I H LW - 5 0 5 0 C E - 0 1 Resources • For technical questions contact [email protected] One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components selector guide 1/6 VMN-SG2027-1204 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s hay I n tertech n o l o g y, I n c . AND TEC I INNOVAT O L OGY For Commercial Applications N HN Surface-Mount Power Inductors O 19 62-2012 Features • • • • Shielded construction Frequency range up to 5.0 MHz Lowest DCR/µH Handles high transient current spikes without saturation Model • Ultra-low buzz noise, due to composite construction • 100 % lead (Pb)-free Inductance Range** DCR Max Rated Current* Dimensions in Inches [mm] 0.22 µH to 1.0 µH 11.4 mΩ to 38.0 mΩ 3 A to 9.3 A L =0.142 [3.6] max W=0.118 ± 0.008 [3.0 ± 0.2] H =0.047 [1.2] max 0.22 µH to 1.5 µH 11.4 mΩ to 46.0 mΩ 2.7 A to 8.5 A L =0.142 [3.6] max W=0.118 ± 0.008 [3.0 ± 0.2] H =0.059 [1.5] max 0.22 µH to 3.3 µH 11.4 mΩ to 61.0 mΩ 2.7 A to 6.5 A L =0.142 [3.6] max W=0.118 ± 0.008 [3.0 ± 0.2] H =0.079 [2.0] max 0.047 µH to 1.0 µH 3.75 mΩ to 52.5 mΩ 4 A to 13 A L =0.175 ± 0.010 [4.45 ± 0.254] W=0.160 ± 0.010 [4.06 ± 0.254] H =0.047 [1.20] max 0.047 µH to 2.2 µH 3.3 mΩ to 100 mΩ 2.75 A to 15 A L =0.175 ± 0.010 [4.45 ± 0.254] W=0.160 ± 0.010 [4.06 ± 0.254] H =0.047 [1.20] max 0.1 µH to 2.2 µH 5.0 mΩ to 90 mΩ 2.85 A to 11 A L =0.175 ± 0.010 [4.45 ± 0.254] W=0.160 ± 0.010 [4.06 ± 0.254] H =0.079 [2.0] max 0.01 µH to 4.7 µH 4.5 mΩ to 105 mΩ 1.7 A to 12 A L =0.175 ± 0.010 [4.45 ± 0.254] W=0.160 ± 0.010 [4.06 ± 0.254] H =0.079 [2.0] max 0.1 µH to 10 µH 3.9 mΩ to 199 mΩ 2.3 A to 17 A L = 0.216 ± 0.010 [5.49 ± 0.254] W= 0.204 ± 0.010 [5.18 ± 0.254] H = 0.078 [2.0] max 0.1 µH to 10 µH 2.9 mΩ to 182.8 mΩ 2.2 A to 21 A L = 0.216 ± 0.010 [5.49 ± 0.254] W= 0.204 ± 0.010 [5.18 ± 0.254] H = 0.078 [2.0] max 0.1 µH to 15 µH 3.16 mΩ to 265 mΩ 1.9 A to 23 A L = 0.216 ± 0.010 [5.49 ± 0.254] W= 0.204 ± 0.010 [5.18 ± 0.254] H = 0.118 [3.0] max 0.1 µH to 22 µH 2.9 mΩ to 260 mΩ 1.9 A to 21 A L = 0.216 ± 0.010 [5.49 ± 0.254] W= 0.204 ± 0.010 [5.18 ± 0.254] H = 0.118 [3.0] max IHLP-1212AB-11 Inductors - IHLP® Series IHLP-1212AE-11 IHLP-1212BZ-11 IHLP-1616AB-01 IHLP-1616AB-11 IHLP-1616BZ-01 IHLP-1616BZ-11 IHLP-2020BZ-01 IHLP-2020BZ-11 IHLP-2020CZ-01 IHLP-2020CZ-11 * DC current (A) that will cause an approximate ∆T of 40 ºC. ** Other values available upon request. Global Part Number I H L PRODUCT FAMILY selector guide P 5 0 5 0 C E E R PACKAGE CODE SIZE 2/6 1 R 0 M 0 1 INDUCTANCE INDUCTANCE SERIES VALUE TOLERA NCE VMN-SG2027-1204 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s hay I n tertech n o l o g y, I n c . AND TEC I INNOVAT O L OGY For Commercial Applications N HN Surface-Mount Power Inductors O 19 62-2012 Applications • L ow-profile, high-current power supplies • DC/DC converters • Battery-powered devices with low height requirements, 1.8 mm to 3.0 mm • PDAs, notebooks, desktop PCs, and servers Model Inductors - IHLP® Series IHLP-2525AH-01 • High-current POL converters • DC/DC converters in distributed power systems • DC/DC converters for field programmable gate arrays (FPGAs) • Graphics cards Inductance Range** DCR Max Rated Current* 0.1 µH to 4.7 µH 0.047 µH to 1.0 µH 3.5 mΩ to 78 mΩ 3 A to 18 A L =0.270 ± 0.015 [6.86 ± 0.381] W=0.255 ± 0.010 [6.47 ± 0.254] H =0.071 [1.80] max 0.1 µH to 10 µH 1.7 mΩ to 129 mΩ 2.5 A to 30 A L =0.270 ± 0.015 [6.86 ± 0.381] W=0.255 ± 0.010 [6.47 ± 0.254] H =0.095 [2.40] max 0.1 µH to 10 µH 1.7 mΩ to 105 mΩ 3 A to 32.5 A L =0.270 ± 0.015 [6.86 ± 0.381] W=0.255 ± 0.010 [6.47 ± 0.254] H =0.118 [3.00] max 1.0 µH to 22 µH 8.0 mΩ to 135 mΩ 2.9 A to 12.5 A L =0.270 ± 0.015 [6.86 ± 0.381] W=0.255 ± 0.010 [6.47 ± 0.254] H =0.118 [3.00] max 0.1 µH to 10 µH 1.37 mΩ to 97.71 mΩ ± 10 % DCR tolerance 10 % 3 A to 32.5 A L =0.270 ± 0.015 [6.86 ± 0.381] W=0.255 ± 0.010 [6.47 ± 0.254] H =0.118 [3.00] max 0.1 µH to 10 µH 1.37 mΩ to 97.71 mΩ ± 5 % DCR tolerance 5 % 3 A to 32.5 A L =0.270 ± 0.015 [6.86 ± 0.381] W=0.255 ± 0.010 [6.47 ± 0.254] H =0.118 [3.00] max 0.56 µH to 10 µH 3.6 mΩ to 71.3 mΩ 4.5 A to 20 A L =0.270 ± 0.015 [6.86 ± 0.381] W=0.255 ± 0.010 [6.47 ± 0.254] H =0.197 [5.00] max 0.1 µH to 10 µH 1.7 mΩ to 105 mΩ 3 A to 32.5 A L =0.270 ± 0.015 [6.86 ± 0.381] W=0.255 ± 0.010 [6.47 ± 0.254] H =0.118 [3.00] max 0.1 µH to 10 µH 1.37 mΩ to 97.71 mΩ ± 10 % DCR tolerance 10 % 3 A to 32.5 A L =0.270 ± 0.015 [6.86 ± 0.381] W=0.255 ± 0.010 [6.47 ± 0.254] H =0.118 [3.00] max 0.1 µH to 10 µH 1.37 mΩ to 97.71 mΩ ± 5 % DCR tolerance 5 % 3 A to 32.5 A L =0.270 ± 0.015 [6.86 ± 0.381] W=0.255 ± 0.010 [6.47 ± 0.254] H =0.118 [3.00] max IHLP-2525BD-01 IHLP-2525CZ-01 IHLP-2525CZ-11 IHLP-2525CZ-06 IHLP-2525CZ-07 IHLP-2525EZ-01 IHLM-2525CZ-01 IHLM-2525CZ-06 IHLM-2525CZ-07 Dimensions in Inches [mm] * DC current (A) that will cause an approximate ∆T of 40 ºC. ** Other values available upon request. IHLP Frequency Range selector guide Series DC/DC Converters Filter Inductors -01 100 KHz to 1 MHz+ -11 25 KHz to 500 KHz Up to SRF of Inductor 3/6 VMN-SG2027-1204 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s hay I n tertech n o l o g y, I n c . Model I INNOVAT 19 62-2012 Inductance Range** DCR Max Rated Current* 0.19 µH to 10 µH 0.95 mΩ to 36.5 mΩ 6.8 A to 40.0 A L =0.453 [11.5] max W=0.405 [10.3] max H =0.158 [4.00] max 0.19 µH to 100 µH 0.8 mΩ to 270.0 mΩ 2.5 A to 40 A L =0.453 [11.5] max W=0.405 [10.3] max H =0.158 [4.00] max 0.1 µH to 10 µH 0.96 mΩ to 34 mΩ 7 A to 43 A L =0.520 ± 0.015 [13.2 ± 0.38] W=0.508 [12.9] max H =0.138 [3.5] max 0.6 µH to 10 µH 1.85 mΩ to 30.86 mΩ ± 10 DCR tolerance ±10 % 7 A to 29 A L =0.520 ± 0.015 [13.2 ± 0.38] W=0.508 [12.9] max H =0.138 [3.5] max 0.6 µH to 10 µH 1.85 mΩ to 30.86 mΩ ± 5 DCR tolerance 5 % 7 A to 29 A L =0.520 ± 0.015 [13.2 ± 0.38] W=0.508 [12.9] max H =0.138 [3.5] max 0.1 µH to 10 µH 0.60 mΩ to 25.5 mΩ 9 A to 55 A L =0.520 ± 0.015 [13.2 ± 0.38] W=0.508 [12.9] max H =0.197 [5.0] max 0.1 µH to 10 µH 0.50 mΩ to 17.2 mΩ 10 A to 60 A L =0.520 ± 0.015 [13.2 ± 0.38] W=0.508 [12.9] max H =0.256 [6.5] max 0.22 µH to 10 µH 0.88 mΩ to 24.9 mΩ 9.7 A to 65 A L = 0.695 ± 0.010 [17.65 ± 0.254] W= 0.675 ± 0.010 [17.15 ± 0.254] H = 0.158 [4.0] max 0.22 µH to 47 µH 0.88 mΩ to 104 mΩ 4.6 A to 65 A L = 0.695 ± 0.010 [17.65 ± 0.254] W= 0.675 ± 0.010 [17.15 ± 0.254] H = 0.158 [4.0] max 0.22 µH to 22 µH 0.66 mΩ to 26.5 mΩ 11 A to 80 A L = 0.695 ± 0.010 [17.65 ± 0.254] W= 0.675 ± 0.010 [17.15 ± 0.254] H = 0.276 [7.0] max 0.33 µH to 100 µH 0.67 mΩ to 110 mΩ 5.0 A to 75.5 A L = 0.695 ± 0.010 [17.65 ± 0.254] W= 0.675 ± 0.010 [17.15 ± 0.254] H = 0.276 [7.0] max 0.1 µH to 22 µH 0.70 mΩ to 7.21 mΩ 16 A to 46 A L =0.400 ± 0.005 [10.16 ± 0.127] W=0.400 ± 0.005 [10.16 ± 0.127] H =0.142 [3.6] max 0.1 µH to 10 µH 0.96 mΩ to 34 mΩ 7 A to 43 A L =0.500 ± 0.005 [12.7 ± 0.127] W=0.500 ± 0.005 [12.7 ± 0.127] H =0.138 [3.5] max IHLP-4040DZ-01 IHLP-4040DZ-11 IHLP-5050CE-01 Inductors - IHLP® Series AND TEC O L OGY For Commercial Applications N HN Surface-Mount Power Inductors O IHLP-5050CE-06 IHLP-5050CE-07 IHLP-5050EZ-01 IHLP-5050FD-01 IHLP-6767DZ-01 IHLP-6767DZ-11 IHLP-6767GZ-01 IHLP-6767GZ-11 IHLW-4040CF-11 IHLW-5050CE-01 Dimensions in Inches [mm] * DC current (A) that will cause an approximate ∆T of 40 ºC. ** Other values available upon request. selector guide 4/6 VMN-SG2027-1204 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s hay I n tertech n o l o g y, I n c . 80 80 Inductance µH Inductance µH Inductance µH Inductance µH 60 60 0.75 0.75 0.50 0.50 40 40 0.25 0.25 20 20 5 5 6 6 7 7 8 8 INNOVAT 1.5 1.5 75 75 1.0 1.0 50 50 0.5 0.5 25 25 0.0 0.0 0 0 0 0 10 10 9 9 100100 2 2 4 4 IHLP-2525CZ-01 1.0µH IHLP-2525CZ-01 1.0µH 80 80 1.00 1.00 80 80 Inductance µH Inductance µH Delta T (C) Delta T (C) Inductance µH Inductance µH 40 40 0.4 0.4 20 20 0.2 0.2 5 10 10 5 15 15 20 20 0 0 25 25 0.75 0.75 60 60 0.50 0.50 40 40 0.25 0.25 20 20 0.00 0.00 0 0 10 10 20 20 DCDC Current A A Current 1.8 1.6 1.6 1.4 1.4 1.2 1.2 1.0 1.0 0.8 0.8 0.6 0.6 0.4 0.4 0.2 0.2 0.0 80 80 60 40 60 40 20 0.0 0 100 20 0 0 10 10 20 20 30 30 40 40 50 1.2 1 1 0.8 0.8 0.6 0.6 0 0 50 50 0.4 0.4 0.2 0.2 100 100 80 80 60 40 0 0 0 0 50 0 10 10 20 20 30 30 40 40 50 60 40 20 20 0 0 50 DC Current A A DC Current DC Current A A DC Current selector guide 1.2 Inductance µH 1.8 40 40 IHLP-5050FD-01 1.0µH IHLP-5050FD-01 1.0µH 100 Inductance µH 2.0 Temperature (ºC) IHLP-5050CE-01 1.0µH IHLP-5050CE-01 1.0µH 2.0 30 30 DCDC Current A A Current Temperature (ºC) Inductance µH 100 100 60 60 0 0 0 16 16 1.25 1.25 0.6 0.6 0 14 14 100 100 0.8 0.8 0 12 12 IHLP-4040DZ-01 1.0µH IHLP-4040DZ-01 1.0µH 1 0 10 10 Temperature (ºC) Temperature (ºC) 1 8 8 Current DCDC Current AA 1.2 1.2 Inductance µH Inductors - IHLP® Series Current DCDC Current AA 6 6 Temperature (ºC) 4 4 2.0 2.0 5/6 VMN-SG2027-1204 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Temperature (ºC) 3 3 62-2012 Temperature (ºC) Temperature (ºC) 1.00 1.00 Temperature (ºC) Temperature (ºC) 100100 2 2 19 IHLP2020BZ-01 1.0µH IHLP2020BZ-01 1.0µH IHLP1616BZ-01 1.0µH IHLP1616BZ-01 1.0µH 1.25 1.25 1 1 O L OGY For Commercial Applications 0 0 0 0 AND TEC I Surface-Mount Power Inductors N HN O V i s hay I n tertech n o l o g y, I n c . I INNOVAT AND TEC O L OGY For Commercial Applications N HN Surface-Mount Power Inductors O 19 62-2012 Inductors - IHLP® Series Worldwide Sales Contacts The Americas EUROPE United states Germany Vishay Americas One Greenwich Place Shelton, CT 06484 United States Ph: +1-402-563-6866 Fax: +1-402-563-6296 Vishay Electronic GmbH Dr.-Felix-Zandman-Platz 1 95100 Selb Germany Ph: +49-9287-71-0 Fax: +49-9287-70435 Asia france singapore Vishay intertechnology Asia Pte Ltd. 37A Tampines Street 92 #07-00 Singapore 528886 Ph: +65-6788-6668 Fax: +65-6788-0988 Vishay S.A. 199, bd de la madelEine 06003 nice, cedex 1 France Ph: +33-4-9337-2727 Fax: +33-4-9337-2726 p.r. China united kingdom Vishay China Co., Ltd. 15D, Sun Tong Infoport Plaza 55 Huai Hai West Road Shanghai 200030 P.R. China PH: +86-21-5258 5000 FAX: +86-21-5258 7979 Vishay Ltd. Suite 6C, Tower House St. Catherine’s Court Sunderland Enterprise Park Sunderland SR5 3XJ UNITED KINGDOM Ph: +44-191-516-8584 Fax: +44-191-549-9556 japan VISHAY JAPAN CO., LTD. Shibuya Prestige Bldg. 4F 3-12-22, Shibuya Shibuya-ku Tokyo 150-0002 Japan Ph: +81-3-5466-7150 fax: +81-3-5466-7160 selector guide 6/6 VMN-SG2027-1204 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000