Package Information www.vishay.com Vishay Siliconix PowerPAK® 8 x 8 Case Outline D2 D3 2x E3 0.1 C A D A 2x 0.1 C B K E E2 PPAK 8x8 (8 mm x 8 mm) L B e Pin 1 dot 5, 6 by marking TOP SIDE VIEW b 0.08 C A1 DIM. A2 A BACK SIDE VIEW MILLIMETERS INCHES MIN. NOM. MAX. MIN. NOM. 8 0.95 1.00 1.05 0.037 0.039 0.041 A1 0.00 - 0.05 0.000 - 0.002 1.05 0.037 A A2 b4 020 ref. 0.95 1.00 MAX. 0.008 ref. 0.039 0.041 D 7.90 8.00 8.10 0.311 0.315 0.319 D2 7.10 7.20 7.30 0.280 0.283 0.287 D3 0.40 BSC 0.016 BSC e 2.00 BSC 0.079 BSC E 7.90 8.00 8.10 0.311 0.315 0.319 E2 4.30 4.35 4.40 0.169 0.171 0.173 E3 0.40 BSC 0.016 BSC K 2.75 BSC 0.108 BSC L 0.45 N3 0.50 0.55 8 0.018 0.020 0.022 8 Notes 1. Use millimeters as the primary measurement. 2. Dimensioning and tolerances conform to ASME Y14.5 M - 1994. 3. N is the number of terminals. 4. Package warpage max. 0.08 mm. 5. The pin 1 identifier must be existed on the top surface of the package by using indentation mark or other feature of package body. 6. Exact shape and size of this feature is optional. ECN: T15-0225-Rev. A, 18-May-15 DWG: 6041 Revision: 18-May-15 1 Document Number: 67859 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000