TNPW0402 e3 - Precision Sample Kit www.vishay.com Vishay Sample Kit High Stability Thin Film Chip Resistors TNPW0402 0.1 % T-9 e3 FEATURES • Superior moisture resistivity (85 °C; 85 % RH) • Excellent overall stability at different environmental conditions 0.05 % (1000 h rated power at 70 °C) • AEC-Q200 qualified • Sulfur resistance verified according to ASTM B 809 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Files contain lengths of cardboard tape, each holding 40 resistors. The kit contains every fourth value of the E 96-series. Parts are sorted in the ascending order of its resistance value and appropriately marked. SPECIFICATIONS Laboratory kit LTW0402 e3 96/4 Resistor type TNPW0402 0.1 % T-9 e3 Temperature coefficient ± 25 ppm/K Tolerance ± 0.1 % 51.1 to 100 k/every 4th value of E 96 Resistance range/E-series Number of resistance values 80 Resistors per value/total 40/3200 Number of pages/files 8/1 Note • The products are specified by the underlying standard product’s datasheet “High Stability Thin Film Flat Chip Resistors” in its most current edition at www.vishay.com/doc?28758 PART NUMBER AND PRODUCT DESCRIPTION PART NUMBER: LTW964TPW04020DB00 L T W 9 6 4 T KIT E-SERIES FRACTION OF E-SERIES LTW 96 4 = 1/4 P W 0 4 0 2 0 D B 0 0 TYPE/SIZE VERSION TCR TOLERANCE TPW0402 = TNPW0402 0 = Standard D = ± 25 ppm/K B = ± 0.1 % PRODUCT DESCRIPTION: LTW 96 4 TNPW0402 0.1 % T-9 e3 LTW 96 4 TNPW0402 ± 0.1 % T-9 e3 KIT E-SERIES FRACTION OF E-SERIES TYPE/SIZE TOLERANCE TCR LEAD (Pb)-FREE LTW 96 4 = 1/4 TNPW0402 ± 0.1 % T-9 = ± 25 ppm/K e3 = Pure tin termination finish Note • The product can be ordered using either the PART NUMBER or the PRODUCT DESCRIPTION Revision: 03-Nov-14 Document Number: 28854 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000