Packaging www.vishay.com Vishay Linear Leaded Resistors DIMENSIONS OF AMMOPACK P N M Bandolier in ammopack 0.8 max. displacement between any two resistors 0 + 1.6 0 S ± 0.1 1 max. Dimensions in millimeters Maximum 1 mm per 10 spacings Maximum 0.5 mm per 5 spacings a B1 B2 A Axial style on tape DIMENSIONS in millimeters - Resistor type, quantities and packaging dimensions for axial taped in ammopack PRODUCT TYPE QUANTITY PACKAGING DIMENSIONS AXIAL TAPED ON BANDOLIER S A |B1 - B2| 63 ± 2.0 1.2 10 63 ± 2.0 1.2 10 AC01 AC03 1000 500 a 6 ± 0.5 6 ± 0.5 AC04 (1) 500 6 ± 0.5 63 ± 2.0 1.2 10 AC05 AC07 AC10 AC01RT (2) 500 500 250 2000 1000 5000 5000 6 ± 0.5 6 ± 0.5 6 ± 0.5 6 ± 0.5 6 ± 0.5 6 ± 0.5 6 ± 0.5 63 ± 2.0 74 ± 2.0 89 ± 4 71 ± 1 53 ± 2.0 53 ± 2.0 53 ± 2.0 1.2 1.2 1.2 1.2 1.2 1.2 1.2 10 10 10 10 5 5 5 1000 6 ± 0.5 53 ± 1.0 1.2 5 5000 6 ± 0.5 53 ± 1.0 1.2 5 1000 100 1000 5000 6 ± 0.5 6 ± 0.5 6 ± 0.5 6 ± 0.5 63 ± 2.0 53 ± 2.0 53 ± 2.0 53 ± 2.0 1.2 1.2 1.2 1.2 5 5 5 5 1000 6 ± 0.5 53 ± 1.0 1.2 5 5000 6 ± 0.5 53 ± 1.0 1.2 5 CBB 0207 MBA/SMA 0204 MBB/SMA 0207 (3) MBE/SMA 0414 MRS16 MRS25 (2) M 85 85 85 85 86 90 105 147 74 77 75 74 78 75 77 47 74 74 75 74 78 75 77 AMMOPACK N 58 58 70 58 118 118 105 53 42 82 55 42 31 114 82 84 42 42 55 42 31 114 82 P 260 260 260 260 270 265 265 334 182 324 330 184 260 260 324 374 184 184 330 184 260 260 324 Notes Manufacturing at different production locations may involve use of differently sized box. Radial taped Manufacturing at different production locations may involve use of differently sized box (1) (2) (3) Revision: 14-Feb-13 Document Number: 28721 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Packaging www.vishay.com Vishay DIMENSIONS in millimeters - Resistor type, quantities and packaging dimensions for axial taped in ammopack PRODUCT TYPE NFR25 NFR25H PAC01 PAC02 PAC03 PAC04 PAC05 PAC06 PR01 PR02 PR03 SFR16S (1) SFR25 (1) SFR25H (1) UXA 0204 UXB 0207 MPR24 UXE 0414 VR25, HVR25 VR37, HVR37 VR68 WK2 QUANTITY 1000 5000 1000 5000 1000 500 500 500 500 500 1000 5000 1000 500 1000 5000 1000 5000 1000 5000 100 1000 5000 100 1000 5000 100 1000 1000 2000 5000 1000 500 2000 5000 1000 a 6 ± 0.5 6 ± 0.5 6 ± 0.5 6 ± 0.5 6 ± 0.5 6 ± 0.5 6 ± 0.5 6 ± 0.5 6 ± 0.5 6 ± 0.5 6 ± 0.5 6 ± 0.5 6 ± 0.5 6 ± 0.5 6 ± 0.5 6 ± 0.5 6 ± 0.5 6 ± 0.5 6 ± 0.5 6 ± 0.5 6 ± 0.5 6 ± 0.5 6 ± 0.5 6 ± 0.5 6 ± 0.5 6 ± 0.5 6 ± 0.5 6 ± 0.5 6 ± 0.5 6 ± 0.5 6 ± 0.5 6 ± 0.5 5 ± 0.5 6 ± 0.5 6 ± 0.5 6 ± 0.5 PACKAGING DIMENSIONS AXIAL TAPED ON BANDOLIER S A |B1 - B2| 52 + 1.5/- 0 1.2 5 52 + 1.5/- 0 1.2 5 52 + 1.5/- 0 1.2 5 52 + 1.5/- 0 1.2 5 63 ± 1 1.2 10 63 ± 1 1.2 10 63 ± 1 1.2 10 63 ± 1 1.2 10 71 ± 1 1.2 10 71 ± 1 1.2 10 53 ± 2.0 1.2 5 53 ± 2.0 1.2 5 52 ± 2.0 1.2 5 63 ± 2.0 1.2 10 52.5 ± 1.5 1.2 5 52.5 ± 1.5 1.2 5 52 1.5/- 0 1.2 5 52 1.5/- 0 1.2 5 52 1.5/- 0 1.2 5 52 1.5/- 0 1.2 5 53 ± 2.0 1.2 5 53 ± 2.0 1.2 5 53 ± 2.0 1.2 5 53 ± 2.0 1.2 5 53 ± 2.0 1.2 5 53 ± 2.0 1.2 5 63 ± 2.0 1.2 5 63 ± 2.0 1.2 5 52 + 1.5/- 0 1.2 5 26 + 1.5/- 0 1.2 5 52 + 1.5/- 0 1.2 5 52 + 1.5/- 0 1.2 5 66.7 ± 1.5 1.2 10 53 ± 1 1.2 5 53 ± 1 1.2 5 73 ± 1 1.2 5 WR4 Note (1) Packing of 1000 pieces (packing code A1) is only available with 5 % tolerance products. M 75 75 75 75 85 85 85 86 90 90 78 75 72 83 75 75 75 75 75 75 74 74 75 75 75 77 47 47 75 48 76 72 82 72 75 95 AMMOPACK N 28 98 28 98 58 58 70 118 118 118 31 114 60 58 28 73 28 98 28 98 42 42 55 40 40 82 84 84 31 48 105 60 111 55 114 57 P 262 270 262 270 260 260 260 270 265 265 260 260 258 256 262 270 262 270 262 270 184 184 330 187 187 324 374 374 260 254 265 250 256 258 260 260 DIMENSIONS OF REEL PACKAGING (AXIAL TAPED) PRODUCT TYPE QUANTITY OUTER PACKAGING DIMENSIONS (for Bandolier on reel) M (mm) N (mm) P (mm) 92 278 278 93 300 298 93 300 298 92 311 311 92 311 311 93 300 298 90 375 375 105 315 305 93 300 298 90 375 375 100 375 375 100 375 375 100 375 375 48 253 330 48 253 330 105 315 305 SFR16S 5000 SFR25 5000 SFR25H 5000 NFR25 5000 NFR25H 5000 VR25, HVR25 5000 VR37, HVR37 5000 VR68 750 PR01, WK2 5000 PR02 5000 PR02L 5000 PR2.5L 2500 PR2.5LS 2500 MBB0207 4000 MRS25 4000 WR4 2500 Note • For MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 reel packaging is without outer box packaging Revision: 14-Feb-13 N P M Dimensions of outer packaging (for axial taped bandolier on reel) Document Number: 28721 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Packaging www.vishay.com Vishay DIMENSIONS OF REEL in millimeters 22 ‘30 (16 x) 30 (1) 77 85.6 Q 22.5 3 V 220 mm leader at beginning and end R Note (1) Dimensions of inner packaging (for bandolier on reel) DIMENSIONS in millimeters - Resistor type, quantities and packaging dimensions for axial taped on reel PACKAGING DIMENSIONS PRODUCT TYPE QUANTITY REEL Q V R 242 76 86 298 75 86 315 76 86 315 80 90 298 75 86 MBA/SMA 0204 5000 MBA/SMA 0207 (2) 5000 MBE/SMA 0414 2500 MRS25 (2) 5000 315 76 86 NFR25 5000 305 75 86 NFR25H 5000 305 75 86 PR01 5000 305 75 86 PR02 5000 356 75 86 PR02L 5000 367 80 91 PR2.5L, PR2.5LS 2500 367 80 91 SFR16S 5000 265 75 86 86 SFR25 5000 305 75 SFR25H 5000 305 75 86 UXA 0204 1000 242 76 86 UXB 0207 MPR24 1000 315 70 80 5000 315 76 86 UXE 0414 1000 315 80 90 VR25, HVR25 5000 305 75 86 VR37, HVR37 5000 356 75 86 VR68 750 298 90 100 WR4 2500 298 90 100 Note (2) Manufacturing at different production locations may involve use of differently sized box DIMENSIONS OF REEL PACKAGING (RADIAL TAPED) DIMENSIONS in millimeters - Resistor type, quantities and dimensions of the packaging for radial taped in reel packaging PACKAGING DIMENSIONS PRODUCT TYPE MBB/SMA 0207 Revision: 14-Feb-13 QUANTITY 4000 REEL Q V R 355 45 50 Document Number: 28721 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Packaging www.vishay.com Vishay DIMENSIONS OF AMMOPACK (RADIAL TAPED) in millimeters N P M Dimensions of ammopack (radial taped) DIMENSIONS OF AMMOPACK (RADIAL TAPED) DIMENSIONS in millimeters - Resistor type, quantities and dimensions of the packaging for radial taped in ammopack PRODUCT TYPE PACKAGING DIMENSIONS AMMOPACK N 262 262 262 262 262 262 262 QUANTITY SFR25 NFR25 NFR25H PR01 VR25 PR02 MBB/SMA 0207 M 45 45 45 45 45 45 45 4000 4000 4000 4000 4000 3000 4000 P 330 330 330 330 330 330 330 PRODUCTS WITH RADIAL LEADS (SFR25, SFR25H, NFR25, NFR25H, VR25, PR01, PR02) P2 Δg P Δh Δh A D H1 W2 d H H0 L L1 W0 W1 W α a α a F P0 P1 A D0 α = 30° to 40° a ≥ 1.3 mm t Detail A Bandolier for types with radial leads Revision: 14-Feb-13 Document Number: 28721 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Packaging www.vishay.com Vishay TAPING PARAMETERS in millimeters SYMBOL PARAMETER D Maximum body diameter A Maximum body length d Lead wire diameter H1 P P0 VALUE TOLERANCE See detailed product specification SFR25 29 max. NFR25 29 max. NFR25H 29 max. PR01 29 max. VR25 29 max. PR02 29 3.0 MBB/SMA 0207 28 max. Pitch of components 12.7 1.0 Feed-hole pitch 12.7 Component height Cumulative pitch error per 20 spacings 0.2 1.0 P1 Feed-hole centre to lead at topside at the tape 3.85 0.5 P2 Feed-hole center to body center 6.35 1.0 F Lead-to-lead distance 4.8 0.7/- 0 h Component alignment 0 1.2 g Component alignment 0 3° W Tape width 18.0 0.5 W0 Minimum hold down tape width 5.5 - W1 Hole position 9.0 0.5 W2 Maximum hold down tape position 0.5 - H0 Lead wire clinch height 16.5 0.5 H Height of component from tape center 19.5 1 D0 Feed-hole diameter 4.0 0.2 t Total tape thickness 0.4 - 0/+ 0.5 L Maximum length of snipped lead 11.0 - L1 Minimum lead wire (tape portion) shortest lead 2.5 - Revision: 14-Feb-13 Document Number: 28721 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Packaging www.vishay.com Vishay MBB/SMA 0207 WITH RADIAL TAPED ON REEL LEAD SPACING (UB) 2.5 mm, SIZE 0207 DIMENSIONS in millimeters P Δh1 Δh P2 Insulated C 3 max. P1 F 1 max. H1 W2 H L W0 W 1 W D0 Direction of Unreeling P0 Δh1 Δh Insulated “Z” 3 max. W2 H1 H P1 F L 1 max. H0 W0 W1 P 12.7 ± 1.0 Pitch of sprocket holes (1) P0 12.7 ± 0.3 Distance between hole center and lead center P1 5.1 ± 0.7 Distance between hole center and resistor center P2 5.1 ± 0.7 Lead Spacing F 2.5 + 0.6, - 0.1 Angle of insertion h 1.3 max. - Angle of insertion h1 2 max. - Width of carrier tape W 18.0 + 1, - 0.5 Width of adhesive tape W0 6.0 ± 0.5 Position of holes W1 9.0 + 0.75, - 0.5 Position of adhesive tape W2 0.5 + 0.5, - 0 Body to hole center (2) H 18.0 ± 2, - 0 Hole Ø D0 4.0 + 0.2 t 0.9 max. - L 11 max. - (3) Height for bending C 2.5 + 0, - 0.5 Height for insertion H1 32 max. - D0 Direction of Unreeling t d 0.6 - Pitch of components P 12.7 ± 1.0 Tape pitch P0 12.7 ± 0.3 Distance between hole center and lead center P1 3.85 ± 0.7 Distance between hole center and resistor center P2 6.35 ± 0.7 F 5.0 + 0.6, - 0.1 Angle of insertion h 1.3 max. - Angle of insertion h1 2 max. - Width of carrier tape W 18.0 + 1, - 0.5 Width of adhesive tape W0 6.0 ± 0.5 Position of holes W1 9.0 + 0.75, - 0.5 W2 0.5 + 0.5, - 0 Position of adhesive tape Area “Z” d Body to hole center 1.5 ± 0.5 3 ± 1 16 ± 0.5 2 ± 0.5 1.0 + 0.4 TOL. Lead Ø Lead spacing W P0 - Pitch of components DIMENSIONS in millimeters P C 0.6 Height for cutting LEAD SPACING (RB) 5.0 mm, SIZE 0207 P2 d Thickness of tape t TOL. Lead Ø (2) H 18.0 + 2, - 0 Lead crimp to hole center (2) H0 16.0 ± 0.5 Hole Ø ± 0.2 D0 4.0 Thickness of tape (3) t 0.9 max. - Height for cutting L 11 max. - Height for bending C 2.5 + 0, - 0.5 Height for insertion H1 32 max. - Notes (1) Test over 10 holes - 9 intervals P 12 x 9 = 114.3 ± 0.5 0 (2) Parallelism, < 0.5 mm (3) Thickness of carrier tape: 0.55 mm ± 0.1 mm Revision: 14-Feb-13 Document Number: 28721 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Packaging www.vishay.com Vishay DIMENSIONS OF BOX (FOR LOOSE PACKAGING) - PR01, PR02, PR03 N P M Dimensions of box DIMENSIONS in millimeters - Resistor type, quantities and dimensions of the packaging in box PACKAGING DIMENSIONS PRODUCT TYPE LOOSE IN BOX QUANTITY M (mm) N (mm) P (mm) PR01 formed 1000 105 70 205 PR02 formed 500 or 1000 105 70 205 PR03 formed 250 or 500 105 70 205 Revision: 14-Feb-13 Document Number: 28721 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000