V ishay I n tertech n o l o g y, I n c . Resistors - AEC-Q200 Qualified, High Power Design I INNOVAT AND TEC O L OGY CRCW-HP e3 Series N HN THICK FILM RESISTORS O 19 62-2012 Pulse-Proof, High-Power Thick Film Chip Resistors Key Benefits • Combines high power ratings with small case sizes: CRCW0603-HP is rated for 0.25 W, the same power rating as the standard 1206 • Superior anti-surge and pulse characteristics compared to D/CRCW e3 series • Small component size allows higher number of temperature cycles • 0R (Jumper) component allows very high current (2-3 times higher than standard) • AEC-Q20 qualified • Halogen-free APPLICATIONS • • • • • • • • High and repetitive surge and pulse loading applications Densely populated PCBs Automotive Ignition/switching circuits AC mains protection Industrial equipment Test and measurement equipment Telecom infrastructure Resources • Datasheet: CRCW-HP e3 Series - http://www.vishay.com/doc?20043 • For technical questions contact [email protected] • Material categorization: For definitions of compliance please see http://www.vishay.com/doc?99912 RoHS One of the World’s Largest Manufacturers of COMPLIANT Discrete Semiconductors and Passive Components e3 PRODUCT SHEET 1/2 VMN-PT0204-1203 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V ishay I n tertech n o l o g y, I n c . AND TEC I INNOVAT O L OGY CRCW-HP e3 Series Vishay Draloric N HN THICK FILM RESISTORS CRCW-HP e3 O 19 62-2012 FEATURES • • • • • Excellent pulse load capability Enhanced power rating Double side printed resistor element Protective overglaze Pure tin solder contacts on Ni barrier layer provides compatibility with lead (Pb)-free and lead containing soldering processes • Compliant to RoHS Directive 2011/65/EU • Halogen-free according to IEC 61249-2-21 definition • AEC-Q200 qualified, rev. C compliant STANDARD ELECTRICAL SPECIFICATIONS SIZE MODEL INCH METRIC CRCW0402-HP e3 0402 RR1005 CRCW0603-HP e3 0603 RR1608 CRCW0805-HP e3 0805 RR2012 CRCW1206-HP e3 1206 RR3216 CRCW1210-HP e3 1210 RR3225 CRCW1218-HP e3 1218 RR3246 CRCW2010-HP e3 2010 RR5025 CRCW2512-HP e3 2512 RR6332 LIMITING ELEMENT TEMPERATURE COEFFICIENT VOLTAGE ppm/K Umax. AC/DC ± 100 50 0.125 (1) ± 200 Zero-Ohm-Resistor: Rmax. = 0.010 Ω, Imax. = 3 A ± 100 0.25 75 ± 200 Zero-Ohm-Resistor: Rmax. = 0.008 Ω, Imax. = 5 A ± 100 0.33 150 ± 200 Zero-Ohm-Resistor: Rmax. = 0.005 Ω, Imax. = 6 A ± 100 0.5 200 ± 200 Zero-Ohm-Resistor: Rmax. = 0.005 Ω, Imax. = 10 A ± 100 0.75 200 ± 200 Zero-Ohm-Resistor: Rmax. = 0.004 Ω, Imax. = 12 A ± 100 1.5 200 ± 200 Zero-Ohm-Resistor: Rmax. = 0.004 Ω, Imax. = 20 A ± 100 1.0 400 ± 200 Zero-Ohm-Resistor: Rmax. = 0.005 Ω, Imax. = 12 A ± 100 1.5 500 ± 200 Zero-Ohm-Resistor: Rmax. = 0.005 Ω, Imax. = 16 A RATED DISSIPATION P70 W TOLERANCE % RESISTANCE RANGE Ω SERIES ±1 ±5 1R to 1M E24; E96 E24 ±1 ±5 1R to 1M E24; E96 E24 ±1 ±5 1R to 1M E24; E96 E24 ±1 ±5 1R to 1M E24; E96 E24 ±1 ±5 1R to 1M E24; E96 E24 ±1 ±5 1R to 1M E24; E96 E24 ±1 ±5 1R to 1M E24; E96 E24 ±1 ±5 1R to 1M E24; E96 E24 Notes • These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime. • Marking: See document “Surface Mount Resistor Marking” (document number 20020). • Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material. (1) CRCW0402-HP resistors feature a single side printed resistive layer only. TECHNICAL SPECIFICATIONS PARAMETER Revision 08-Dc-10 Resistors - AEC-Q200 Qualified, High Power Design Pulse Proof, High Power Thick Film Chip Resistors Pulse-Proof, High-Power Thick Film Chip Resistors Rated dissipation P70 (2) Limiting element voltage Umax. AC/DC Insulation voltage Uins. (1 min) Insulation resistance Category temperature range Weight UNIT W V V Ω °C mg CRCW CRCW CRCW CRCW CRCW CRCW CRCW CRCW 0402-HP 0603-HP 0805-HP 1206-HP 1210-HP 1218-HP 2010-HP 2512-HP 0.125 0.25 0.33 0.5 0.75 1.5 1.0 1.5 50 75 150 200 200 200 400 500 > 75 > 100 > 200 > 300 > 300 > 300 > 300 > 300 > 109 - 55 to + 155 0.65 2 5.5 10 18 31 25.5 42 Note (2) The power dissipation on the resistors generates a temperature rise against the local ambient, depending on the heat flow support of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature of 155 °C is not exceeded. www.vishay.com 170 PRODUCT SHEET For technical questions, contact: [email protected] 2/2 Document Number: 20043 Revision: 08-Dec-10 VMN-PT0204-1203 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000