NTC Thermistor Assemblies Vishay Dale NTC Thermistor Assemblies FEATURES • Standard and custom assemblies are available in a variety of configurations • Assemblies can conveniently attach to or be an integral part of any system to monitor or control temperature • No added labor required prior to assembly in the intended application Standard and custom assemblies are available in a variety of configurations. The choice of assembly style is dependent on the application. The primary factors which determine the optimum configuration of a thermistor assembly are the operating environment, mounting, time response and minimum dissipation constant. The two factors which do vary considerably with assembly design are time constant and dissipation constant. The time constant will typically be of greater duration in encapsulated thermistors. This is, of course, due to additional mass surrounding the thermistor element; therefore, extending the thermal transfer time. Dissipation constant will also be greater in assemblies. The additional housing mass serves well as a heat sink. Greater power is therefore required to induce self-heating. Both time constant and dissipation constant will vary with the selected thermistor and housing. Heat transfer properties of the housing, thermistor location, mass and wire type determine these constants. It is recommended to evaluate or consult the factory in applications where TC and DC are critical. ASSEMBLY STYLES IMMERSION PROBES 10. Polyester Housing 1. Thread Mounted 11. Epoxy Tip Probe 2. Penetration Probe 12. Pipe Sensor 3. Tubular Stainless Steel SURFACE SENSORS 4. Tubular Pyrex® 13. Ring Tongue Lugs 5. Flexible Immersion 14. Heat Sink Sensors GENERAL PURPOSE SENSORS 15. Rectangular Block Sensors 6. Delrin® Housing Refer to “How to Select an NTC Thermistor” for general design aids in choice of thermistor value, tolerance and R-T curve. 7. Stainless Steel Rod 8. Gold Anodized Flanged Sensor 9. ABS Housing ORDERING INFORMATION 1. Choose Style: R07 2. Select Wire Type: PVC Insulated - example 300 3. Select Wire Length: L06 4. Select Thermistor - See thermistor selector sheet 1) Curve 01 2) Resistance value numeric code - 31 3) Resistance tolerance 10 5. Contact factory for part numbers. Document Number: 33012 Revision: 23-Oct-01 For technical questions, contact: [email protected] www.vishay.com 17 NTC Thermistor Assemblies NTC Thermistor Assemblies Vishay Dale IMMERSION TYPE ASSEMBLY HOUSING X1 X2 0.438 [11.12] 25 20 0.38 [6.35] [5.08] [9.65] 1/8” PROBE 0.160 [4.06] “L” “L” = 1.15, 3.6 INCHES 1/8 [3.18] 01.05 [2.67] MATERIAL #304 STAINLESS STEEL 3/16” PROBE THREAD 1/8-27-NPT 0.160 [4.06] THREAD 1/8 NPT T1 = 1” T2 = 1.5” T3 = 3” T4 = 6” 0.438 [11.12] 0.25 0.20 0.38 [9.65] T5 = 1.5” T6 = 2.5” T7 = 3” T8 = 4” T9 = 6” T10 = 8” MATERIAL: #303 & #304 STAINLESS STEEL MATERIAL: #303 STAINLESS STEEL 0.563 [14.3] 0.188 [4.78] X3 0.475 [12.06] “L” “L” = 1, 1.5, 2.5, 3, 4, 6, 8 INCHES X4 0.960 [24.38] 0.312 [7.92] 0.156 0.438 [3.96] [11.12] 0.938 [23.82] T11 = 2.5” T12 = 6” “L” “L” = 2.5, 6 INCHES 1/8-27-NPT MATERIAL: #304 STAINLESS STEEL MATERIAL: BRASS TUBES T1, T2, T3, T4, T13, T14 FIT TO HEX BUSHING “X1” X5 0.650 [16.51] 0.30 [7.62] 0.160 [4.06] 0.168 [4.27] MATERIAL #304 STAINLESS STEEL 0.295 [7.49] 1/4-20-NC TAP T13 = 1.25” T14 = 6.25” “L” “L” = 1.25, 6.25 INCHES TUBES T1, T2, T3, T4, T13, T14 FIT TO COUPLING “X5” ALL TUBES MAY BE USED INDEPENDENT OF ANY BUSHING OR COUPLING MATERIAL: #303 STAINLESS STEEL 1/4 [6.35] 0.230 [5.84] MATERIAL #304 STAINLESS STEEL TUBES T5, T6, T7, T8, T9, T10 FIT TO HEX BUSHING “X2” 1/8” PROBE 3/16 [4.78] MATERIAL #304 STAINLESS STEEL 1/8 [3.18] 0.105 [2.67] PROBE + HEX HOUSING LEAD TYPE SHRINK WRAP LEAD LENGTH THERMISTOR LEAD TYPE PROBE SHRINK WRAP SEE THERMISTOR SELECTION SHEET X1 T1 300 L24 04 33 C3 RESISTANCE TOLERANCE RESISTANCE VALUE NUMERIC CODE THERMISTOR MATERIAL CURVE USED IN ASSEMBLY LENGTH OF WIRE TYPE OF INTERCONNECTION WIRE TUBE SELECTION HEX BUSHING/PROBE SELECTION HOOK-UP WIRE TYPE STANDARD WIRE FOR HEX/TUBE HOUSINGS X1/X5 X2 X3 X4 T1 - T4 T5 - T10 T11 - T12 T13 - T14 Cable 508 503 503 503 508 503 503 508 Teflon Insulated Wire 208 202 202 202 208 202 202 208 PVC Insulated Wire 300 300 300 300 300 300 300 300 Twisted Pair Wire 702 702 702 702 702 702 702 702 Zip (Flat) Wire 601 601 601 601 601 601 601 601 Ni Wire, Teflon Insulated 400 400 400 400 400 400 400 400 STANDARD WIRE LENGTHS: www.vishay.com 18 3, 6, 9, 12, 24, 36 Inches For technical questions, contact: [email protected] Document Number: 33012 Revision: 23-Oct-01 NTC Thermistor Assemblies NTC Thermistor Assemblies Vishay Dale CUP TYPE ASSEMBLY HOUSING C01 1.500 [38.1] Ø 0.28 [7.11] 0.162 [4.11] MATERIAL: #303 STAINLESS STEEL C04 MATERIAL: #2011 ALUMINUM C05 0.631 [16.03] C06 0.453 [11.51] 0.200 [5.08] 0.169 [4.29] 0.63 [16.0] 0.140 [3.56] 0.248 [6.3] 0.274 [6.96] 0.175 [4.44] C07 C08 1.500 [38.1] C09 0.500 [12.7] Ø 0.28 [7.11] 0.476 [12.09] 0.170 [4.32] 0.140 [3.56] 0.22 [5.59] 0.040 [1.02] MATERIAL: DELRIN II#500 WHITE & BLACK MATERIAL: CELANEX 2012-2 (BLACK POLYESTER) 0.298 [7.57] 0.251 [5.46] 0.035 [0.89] MATERIAL: GOLD ANODIZED ALUMINUM MATERIAL: #2024-T4 ALUMINUM MATERIAL: NICKEL PLATED BRASS 0.188 [4.78] 0.875 [22.2] Ø 0.156 [3.96] 0.125 [3.18] 0.248 [6.3] MATERIAL: ALUMINUM C03 C02 0.875 [22.2] 0.230 [5.84] 0.170 [4.32] MATERIAL: MOLDED ABS LEAD LENGTH CUP SELECTION LEAD TYPE THERMISTOR SEE THERMISTOR SELECTION SHEET C07 202 L24 04 33 C3 RESISTANCE TOLERANCE RESISTANCE VALUE NUMERIC CODE THERMISTOR MATERIAL CURVE USED IN ASSEMBLY LENGTH OF WIRE TYPE OF INTERCONNECTION WIRE CUP SELECTION STANDARD WIRE FOR CUP HOUSINGS HOOK-UP WIRE TYPE C01 C02 C03 C04 C05 C06 C07 Cable 503 N/A 508 508 508 503 503 508 Teflon Insulated Wire 202 202 202 202 202 202 202 202 PVC Insulated Wire 300 300 300 300 300 300 300 300 Zip (Flat) Wire 601 601 601 601 601 601 601 601 Twisted Pair Wire 703 703 703 703 703 703 703 703 Ni Wire, Teflon Insulated 400 400 400 400 400 400 400 400 STANDARD WIRE LENGTHS: Document Number: 33012 Revision: 23-Oct-01 C08 3, 6, 9, 12, 24, 36 Inches For technical questions, contact: [email protected] www.vishay.com 19 NTC Thermistor Assemblies NTC Thermistor Assemblies Vishay Dale TEX BUSHING/PROBE TYPE ASSEMBLY HOUSING H01 Ø 0.110 [2.8] H02 0.094 [2.39] Ø 0.125 [3.18] H03 0.170 [4.32] 0.750 [19.05] TAP METRIC M3-5 0.500 [12.7] 0.160 0.160 [4.06] [4.06] 0.060 [1.52] 0.375 [9.52] 0.188 [4.76] 0.375 [9.52] 0.180 [4.57] Ø 0.125 H04 0.305 0.140 [7.75] [3.56] THREAD M4 X 0.7 6g 0.040 [1.02] 0.140 [3.56] [6.35] THREAD 6-32UNC-2A 0.050 [1.27] 0.236 [6.0] MATERIAL BRASS CA-132 0.320 [8.13] 0.188 [4.78] H08 0.570 [14.48] 0.250 [6.35] 0.320 [33.53] 0.122 [3.1] 0.112 [2.84] THREAD 4-40 UNC-2A 0.075 [1.9] 0.250 [6.35] MATERIAL 2024-T4 ALUMINUM HEAT SINK SELECTION 0.750 [19.05] 0.375 [9.52] 0.375 [9.52] 5/16 [7.95] THREAD 10-32UNF-2A 0.030 [0.76] 0.200 [5.08] MATERIAL ALUMINUM (H5) & BRASS (H6) 0.313 [7.95] MATERIAL ANODIZED ALUMINUM H07 1/4 [6.35] 0.122 [3.1] Ø 0.125 H05 & H06 0.500 [12.7] 0.250 [6.35] 0.250 0.540 [13.72] THREAD 1032UNC-2A 0.050 [1.27 0.188 [4.78] MATERIAL ALUMINUM MATERIAL ALUMINUM 0.571 [14.5] 0.315 [8.00] 0.256 [6.5] 0.125 [3.18] 0.150 [3.81] 0.300 [7.62] 0.130 [3.3] 0.180 [4.57] 0.890 [22.61] 0.188 [4.78] 0.250 [6.35] 0.187 [4.75] 0.128 [3.25] MATERIAL #303 STAINLESS STEEL LEAD LENGTH THERMISTOR LEAD TYPE SEE THERMISTOR SELECTION SHEET H06 202 L24 04 33 C3 RESISTANCE TOLERANCE RESISTANCE VALUE NUMERIC CODE THERMISTOR MATERIAL CURVE USED IN ASSEMBLY LENGTH OF WIRE TYPE OF INTERCONNECTION WIRE CUP SELECTION STANDARD WIRE FOR HEAT SINK HOUSINGS HOOK-UP WIRE TYPE H01 H02 H03 H04 H05 H06 H07 Cable 508 508 508 503 503 503 503 508 Teflon Insulated Wire 202 202 202 202 202 202 202 202 PVC Insulated Wire 306 306 306 306 306 306 306 306 Twisted Pair Wire 703 703 703 703 703 703 703 703 Zip (Flat) Wire 601 601 601 601 601 601 601 601 Ni Wire, Teflon Insulated 400 400 400 400 400 400 400 400 STANDARD WIRE LENGTHS: www.vishay.com 20 H08 3, 6, 9, 12, 24, 36 Inches For technical questions, contact: [email protected] Document Number: 33012 Revision: 23-Oct-01 NTC Thermistor Assemblies NTC Thermistor Assemblies Vishay Dale RING TONGUE TYPE ASSEMBLY HOUSING R01 R02 R03 R04 0.544 [13.82] 0.770 [19.56] 0.616 [15.65] 0.250 [6.35] 0.119 [3.02] 0.250 [6.35] 0.146 [3.71] 0.032 THICK [0.81] 0.212 [5.38] 0.032 THICK [0.81] 0.233 [5.92] 0.770 [19.56] 0.635 [16.13] INSULATED BARREL INSULATED BARREL 0.820 [20.83] 0.660 [16.76] BARE METAL BARREL 0.158 [4.01] INSULATED BARREL 0.250 [6.35] R07 0.145 [3.68] 0.160 [4.06] 0.543 [13.8] 0.958 [24.33] 0.230 [5.84] R06 0.117 [2.97] 0.032 THICK [1.02] 1.23 [31.24] 0.290 [7.36] 0.250 [6.35] R05 0.032 THICK [0.81] 0.032 THICK [0.81] 0.890 [22.61] 0.705 [17.90] INSULATED BARREL 0.250 [6.35] 0.550 [13.97] 0.430 [10.92] 0.266 [6.76] 0.173 [4.39] 0.040 THICK [1.02] 0.820 [20.83] 0.660 [16.76] 0.270 [6.86] BARE METAL BARREL 0.220 [5.6] R08 0.173 [4.39] 0.040 THICK [1.02] 0.200 [5.08] 0.051 THICK [1.3] 0.945 [24.00] 0.742 [18.85] 0.270 [6.86] BARE METAL BARREL 0.359 [9.12] BARE METAL BARREL 0.285 [7.24] 0.220 [5.6] RING TOUNGUE LUG SELECTION LEAD LENGTH THERMISTOR LEAD TYPE SEE THERMISTOR SELECTION SHEET R03 202 L24 04 33 C3 RESISTANCE TOLERANCE RESISTANCE VALUE NUMERIC CODE THERMISTOR MATERIAL CURVE USED IN ASSEMBLY LENGTH OF WIRE TYPE OF INTERCONNECTION WIRE CUP SELECTION STANDARD WIRE FOR HEAT SINK STYLES HOOK-UP WIRE TYPE R01 R02 R03 R04 R05 R06 R07 R08 Cable 503 503 503 503 N/A 508 508 503 Teflon Insulated Wire 202 202 202 202 208 207 207 201 PVC Insulated Wire 301 301 304 306 301 301 304 306 Twisted Pair Wire 703 703 703 703 N/A 703 703 702 Zip (Flat) Wire 601 601 601 601 601 601 601 601 Ni Wire, Teflon Insulated 400 400 400 400 400 400 400 400 STANDARD WIRE LENGTHS: Document Number: 33012 Revision: 23-Oct-01 3, 6, 9, 12, 24, 36 Inches For technical questions, contact: [email protected] www.vishay.com 21 NTC Thermistor Assemblies NTC Thermistor Assemblies Vishay Dale PIPE STYLE ASSEMBLY HOUSING P01 P02 0.200 [5.08] 2.15 MAX [54.6] 1.180 [29.97] 0.156 [3.96] 0.550 [13.97] 0.925 [23.5] CONTACT LENGTH P03 Ø 0.312 [7.92] 0.385 [9.78] 0.0625 0.290 [1.59] [7.37] Ø 0.195 [4.95] Ø 0.235 [5.97] Ø 0.140 [3.56] Ø 0.332 [8.43] 0.560 [14.22] 0.065 [1.65] MATERIAL: #305 STAINLESS STEEL P04 Ø 0.287 [7.29] P05 P06 Ø 0.287 [7.29] 0.300 [7.62] 0.1 68 R [4. 27] 0.158 0.250 R 0.040 [4.01] [6.35] [1.02] MATERIAL: #305 STAINLESS STEEL MATERIAL: CELANEX 2012-2 (BLACK POLYESTER) MATERIAL: #304 STAINLESS STEEL CUP SELECTION LEAD LENGTH TIE DOWN LEAD TYPE THERMISTOR SEE THERMISTOR SELECTION SHEET P06 202 L24 04 33 C3 RESISTANCE TOLERANCE RESISTANCE VALUE NUMERIC CODE THERMISTOR MATERIAL CURVE USED IN ASSEMBLY LENGTH OF WIRE TYPE OF INTERCONNECTION WIRE CUP SELECTION STANDARD WIRE FOR PIPE HOUSINGS HOOK-UP WIRE TYPE P01 P02 P03 P04 P05 Cable 508 508 N/A 503 N/A N/A Teflon Insulated Wire 202 202 202 202 202 202 PVC Insulated Wire 304 304 301 304 301 301 Zip (Flat) Wire 601 601 601 601 601 601 Twisted Pair Wire 703 703 703 703 703 703 Ni Wire, Teflon Insulated 400 400 400 400 400 400 STANDARD WIRE LENGTHS: www.vishay.com 22 P06 3, 6, 9, 12, 24, 36 Inches For technical questions, contact: [email protected] Document Number: 33012 Revision: 23-Oct-01 NTC Thermistor Assemblies NTC Thermistor Assemblies Vishay Dale ASSEMBLY CONNECTORS I1 18 - 22 WIRE I2 I3 20 - 24 WIRE I4 22 AWG. 2-CIRCUIT HOUSING AND DUST COVER COVER (AMP P/N: 640551-2) 24 - 26 WIRE RECEPTABLE FOR 3/16 X 0.020 TAB I5 2 CAP HOUSINGS 2 SOCKETS SOCKET (18 - 24 AWG) (AMP P/N: 350889-1) HOUSING (AMP P/N: 641219-2) TIN COPPER ALLOY CONTACTS, GOLD PLATED I6 1 RECEPTACLE 2 TERMINALS FEMALE TERMINAL (24 - 30 AWG) (MOLEX P/N: 02-08-1132) BRASS W/TIN PLATE CAP HOUSING (AMP P/N: 350888-1) I7 1 PLUGHOUSINGS 2 TERMINALS MALE TERMINAL (18 - 24 AWG) (AMP P/N: 350690-2) BRASS W/GOLD PLATE FREE HANGING RECEPTACLE (MOLEX P/N: 03-06-1023) I8 1 MINI-FIT HOUSING 2 TERMINALS FEMALE TERMINAL (18 - 24 AWG) (MOLEX P/N: 39-00-0039) BRASS W/TIN PLATE 2-CIRCUIT PLUG HOUSING (AMP P/N: 350777-1) 2-GKT MINI-FIT HOUSING (MOLEX P/N: 39-01-2020) ASSEMBLY STRAIN RELIEF AND MARKING S1: SHRINK WRAP STRAIN RELIEF, HOUSING/LEAD S5 S2: SHRINK WRAP STRAIN RELIEF, LEADS S3: SHRINK WRAP WITH MARKING S2 S4: AVERY LABEL MARKING . ST CU /N P S5: SPRING - STRAIN RELIEF S1 S4 S3 CUSTOMER P/N Document Number: 33012 Revision: 23-Oct-01 For technical questions, contact: [email protected] www.vishay.com 23 NTC Thermistor Assemblies NTC Thermistor Assemblies Vishay Dale HOOK UP WIRES AVAILABLE WIRE P/N # COND’S AWG CONDUCTOR MATERIAL INSULATOR NOM. DIA COMMENTS Bare, Copper Wire, Tin Plated 100 1 20 Cu/Tin Plate 0.032 “G” Series Thermistor Std. 250201-05 101 1 22 Cu/Tin Plate 0.025 102 1 26 Cu/Tin Plate 0.016 “B” Series Thermistor Std. 220049-04 103 1 28 Cu/Tin Plate 0.013 “C” Series Thermistor Std. 220049-01 104 1 105 1 30 Cu/Tin Plate 0.010 “M” Series Thermistor Std. 220049-02 32 Cu/Tin Plate 0.008 “F” Series Thermistor Std. 220049-03 250201-04 Copper Conductor, Silver Plated with Teflon Insulation 200 1 18 - 19/30 Cu/Silver Plate Teflon 0.079 Black 220019-06 201 1 22 - 19/34 Cu/Silver Plate Teflon 0.053 Black 220019-04 202 1 24 - 7/32 Cu/Silver Plate Teflon 0.047 Black, White 220019-02, -03 203 1 24 - 19/36 Cu/Silver Plate Teflon 0.047 White 220019-05 204 1 24 - 7/32 Cu/Silver Plate Teflon 0.036 Black 220166-03 205 1 26 - 19/38 Cu/Silver Plate Teflon 0.042 Red 206 1 28 - 7/36 Cu/Silver Plate Teflon 0.038 Orange, Red, Black 220086-02, -03, -09 207 1 28 - 7/36 Cu/Silver Plate Teflon 0.027 Black, White, Green 220166-01, -02, -04 208 1 30 - 7/38 Cu/Silver Plate Teflon 0.035 Black 220019-05 209 1 24 Cu/Silver Plate Teflon 0.040 Black, White 220019-01, -07 210 1 26 Cu/Silver Plate Teflon 0.035 Black 211 1 28 Cu/Silver Plate Teflon 0.032 Black 220086-06 212 1 30 Cu/Silver Plate Teflon 0.029 Black 220086-08 Black, White, MIL-W-16878/1, Type B 220079-01 Copper Conductor, Tin Plated with PVC Insulation 300 1 26 - 19/38 Cu/Tin Plate PVC 0.038 301 1 28 - 7/36 Cu/Tin Plate PVC 0.034 302 1 24 - 7/32 Cu/Tin Plate PVC 0.044 Black, White, MIL-W-16878/1, Type B 220079-04, -06 303 1 22 - 19/34 Cu/Tin Plate PVC 0.050 Black, MIL-W-16878/1, Type B 220079-07 304 1 30 - 7/38 Cu/Tin Plate PVC 0.032 Black, MIL-W-16878/1, Type B 220079-08 305 1 22 - 7/30 Cu/Tin Plate PVC 0.095 Black, UL 1015 220234-01 306 1 24 - 7/32 Cu/Tin Plate PVC 0.089 Yellow, UL 1015 220234-03 307 1 22 - 7/30 Cu/Tin Plate PVC 0.062 White, UL 1569 220234-02 308 1 26 - 7/34 Cu/Tin Plate PVC 0.038 Light Blue, UL 1061 220262-01 309 1 22 - 7/30 Cu/Tin Plate PVC 0.058 Black, UL 1569 220313-01 310 1 26 - 7/34 Cu/Tin Plate PVC 0.051 Black, UL 1569 220323-01 311 1 24 - 7/32 Cu/Tin Plate PVC 0.056 Black, UL 1569 220323-02 312 1 24 Cu/Tin Plate PVC 0.040 Black, UL 1061 220332-01 313 1 30 Cu/Tin Plate PVC 0.027 Black 220181-01 Black, White,Green, MIL-W-16878/1, Type B 220079-02, -05, -11 Miscellaneous Insulated Wires 400 1 30 Nickel Teflon 0.020 Yellow, Black, “T” Series Thermistor 220215-02, -03 401 1 30 Cu/Silver Plate Kynar 0.020 Black, UL 1423 220316-01 402 1 28 - 7/36 Cu/Silver Plate Kapton 0.025 Black 220317-01 www.vishay.com 24 For technical questions, contact: [email protected] Document Number: 33012 Revision: 23-Oct-01 NTC Thermistor Assemblies NTC Thermistor Assemblies Vishay Dale HOOK UP WIRES AVAILABLE (continued) WIRE P/N # COND’S AWG CONDUCTOR INSULATOR MATERIAL NOM. O.D. COMMENTS Cables - Wires w/ Jackets Exterior 500 2 18 - 19/30 Cu/Tin Plate PVC 0.22/0.075 Gray Jacket w/ Black/White/Braid Shield 220298-01 501 2 20 - 7/28 Cu/Tin Plate PVC 0.175/0.059 Gray Jacket w/ Red/Black Wires 220014-02 502 2 22 - 19/34 Cu/Silver Plate Teflon 0.142/0.050 White Jacket w/ Black/White/Braid Shield 220131-01 503 2 22 - 7/30 Cu/Tin Plate PVC 0.160/0.048 Gray Jacket w/ Red/Black Wires 220014-01 504 3 22 - 7/30 Cu/Tin Plate PVC 0.160/0.048 Gray Jacket w/ Red/Black/White Wires 220014-03 505 3 22 - 7/30 Cu/Tin Plate PVC 0.130/0.048 Gray Jacket w/ Red/Black/Drain Wires 220112-01 506 2 22 - 7/30 Cu/Tin Plate PVC 0.170/0.057 Gray Jacket w/ Red/Black Wires 220177-01 507 3 22 - 7/30 Cu/Tin Plate PVC 0.160/0.048 Gold Jacket w/ Black/White Wires 220121-01 508 2 28 - 7/36 Cu/Tin Plate PVC 0.100/0.033 Gray Jacket w/ Black/White/Paper Wrap 220202-01 509 3 20 Cu/Tin Plate Teflon 0.150 Red, White, Black in Stainless Steel Braid 220021-01 Flat Wire & Zip Cords 600 2 24 - 7/32 Cu/Tin & Cu PVC 0.065 X 0.130 Clear w/ 1 Tin Plated Cu and 1 Bare Cu 220016-01 601 2 28 - 7/36 Cu/Tin & Cu PVC 0.034 X 0.067 Black w/ 1 Tin Plated Cu and 1 Bare Cu 220016-03 602 2 18 - 41/34 Cu/Tin & Cu PVC 0.105 X 0.205 Black w/ 1 Tin Plated Cu and 1 Bare Cu 220180-01 603 2 28 - 7/36 Cu/Tin Plate PVC 0.200 X 0.041 Gray, UL 2651 220223-01 Cu/Silver Plate Teflon 0.044 White, UL 1213 - 2 Twists/Inch 220334-01 Twisted Pair Wires 700 2 24 - 7/32 701 2 22 - 19/34 Cu/Tin Plate Tefzel 0.043 Blue 220113-01 702 2 22 - 7/30 Cu/Tin Plate PVC 0.063 Black/White, UL 1007 220176-01 703 2 24 - 7/32 Cu/Tin Plate PVC 0.057 Black/White, UL 1007 220176-02 704 2 24 - 7/32 Cu/Tin Plate PVC 0.057 White/White, UL 1007 220176-03 Document Number: 33012 Revision: 23-Oct-01 For technical questions, contact: [email protected] www.vishay.com 25 NTC Thermistor Assemblies NTC Thermistor Assemblies Vishay Dale THERMISTOR SELECTIONS FOR SPECIAL ASSEMBLIES R25 Code 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 49 50 51 52 53 R25 (Ohms) 50 56 68 82 100 120 150 180 220 270 330 390 470 500 560 680 820 1K 1.2K 1.5K 1.8K 2.2K 2.7K 3.3K 3.9K 4.7K 5K 5.6K 6.8K 8.2K 10K 12K 15K 18K 22K 27K 33K 39K 47K 50K 56K 68K 82K 100K 120K 150K 180K 220K 270K 500K 560K 680K 820K 1 Meg 01 02 03 04 CURVE NUMBER 07 08 09 12 • • • • • • • • • 14 • • • • • • • • • 17 THERMISTOR TOLERANCES • • • • • • • • • POINT MATCHED AT 25 °C • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 01 ±1% 02 ±2% 03 ±3% 05 ±5% 10 ± 10 % CURVE TRACKING B3 ± 0.5 % 0 °C to + 70 °C A3 ±1% 0 °C to + 70 °C B4 ± 0.5 % 0 °C to + 100 °C A4 ±1% 0 °C to + 100 °C B5 ± 0.5 % + 25 °C to + 90 °C A5 ±1% + 25 °C to + 90 °C B8 ± 0.5 % 0 °C to + 50 °C C8 ±1% 0 °C to + 50 °C • • • • • Curve 1, 10K Thermistor, ± 5 % at 25 °C 01 CURVE NUMBER www.vishay.com 26 31 VALUE CODE 05 TOLERANCE at + 25 °C For technical questions, contact: [email protected] Document Number: 33012 Revision: 23-Oct-01