1SS/1S1/1SM 1S-Series SUB-MINIATURE ROCKERS The 1S family of sub-miniature rocker switches is composed of three switch series; the 1S1-Series sub-miniature rocker switch, the 1SS-Series sealed sub-miniature rocker switch, and the 1SM-Series surface mount sealed subminiature rocker switch. All of these series offer a variety of ratings, circuits, contact materials, terminal platings, and actuator colors. 1S1-Series 1SS-Series Product Highlights: IP67 Sealing 5 Circuit Configurations 3 Rocker Styles to choose from Dry-Circuit thru 3A 125VAC Rating Snap-in, Solder Lug or PC Terminations 1SM-Series Typical Applications: Instrumentation Test Equipment Telecommunications Networking Handheld Appliances Resources: Download 3D CAD Files IGS STP Carling Technologies, Inc. 60 Johnson Avenue, Plainville, CT 06062 Email: [email protected] Application Support: [email protected] Phone: 860.793.9281 Fax: 860.793.9231 www.carlingtech.com 2 | 1S-Series - General Specifications, 1SS Ordering Scheme 1SS-Series 1S1-Series Sealed Sub-Miniature Rocker Switch Electrical Contact Rating refer to ordering scheme Electrical Life 1S1-Series: 30,000 make & break cycles @ full load 1SS & 1SM-Series: 50,000 make & break cycles @ full load Contact Resistance 20 mΩ max. initial @ 2-4 VDC 100mA for both silver & gold plated contacts Insulation Resistance 1000 MΩ min. Dielectric Strength 1500 Volts RMS @ sea level Physical Operating Temperature Index of Protection Solder Heat Resistance Actuator Travel -30°C to +85°C 1SS & 1SM-Series: IP67 MIL-STD-202, Method 210 25° 1SS 1 Series WMSP 1 2 Poles 3 Circuit 1 SERIES 1SS Sealed Sub-Miniature Rocker Switch Sealed Surface Mount Sub-Miniature Rocker Switch Material Case Rocker Bushing Housing Switch Support Terminal Seal R2 4 Actuator Style all UL94 V-0 1S1-Series: Dially phthalate (DAP) 1SS-Series: Glass filled nylon 6/6, flame retardant, heat stabilized 1SM-Series: Glass filled nylon 4/6, flame retardant, heat stabilized 1S1-Series: Nylon (UL 94V-0) 1SS & 1SM-Series: Nylon, black standard, internal o-ring sealed 1S1-Series: Brass, nickel plated 1SS-Series: Glass filled nylon 6/6, flame retardant, heat stabilized (UL 94V-0) 1SM-Series: Glass filled nylon 4/6, flame retardant, heat stabilized (UL 94V-0) 1S1-Series: Stainless Steel 1S1 & 1SM-Series: Brass, tin plated Epoxy 2 M2 G E 5 Actuator Color 6 Termination 6 TERMINATION M1 Solder Lug M2 PCB M6 PC Mount, 90˚ horizontal M7 PC Mount, 90˚ vertical VS2 PC Mount, U bracket 2 POLES WMSP Single pole - uses terminals 1, 2 & 3 WMDP Double pole - uses terminals 1, 2, 3, 4, 5 & 6 3 CIRCUIT ( ) - momentary Position:1 2 2-3, 5-6 Connected Terminals 1ON NONE 2ON NONE 3ON OFF 4(ON) OFF 5ON OFF 1SM-Series Sub-Miniature Rocker Switch 7 Contacts 8 Seal M61 Snap-In, U bracket, 90˚ horizontal M71 Snap-In, U bracket, 90˚ horizontal VS21 Snap-In, U bracket See page 6-7 for dimensional specifications. 3 2-1, 5-4 ON (ON) ON (ON) (ON) 4 ACTUATOR STYLE R1 Small Rocker R2 Narrow Black Rocker 5 ACTUATOR COLOR 1 White 2 Black 3 Red Other colors available, consult factory. 7 CONTACTS / TERMINALS Contact Material Terminal Plating Rating Approvals G silver 1 gold over silver 3A 125VAC or 28VDC, IP67 1.5A 250VAC 2,5 4 K gold tin 0.4VA max 20V max (AC/DC) IP67 P silver 1,6 tin 4 3A 125VAC or 28VDC, IP67 1.5A 250VAC R gold 2 gold 2,3 0.4VA max 20V max (AC/DC) IP67 8 EPOXY SEAL E Epoxy Seal O without Epoxy Seal Notes: Tin option not available with M1 terminal. 1 Movable contact and terminal platings: silver over copper alloy 2 Movable contact platings: gold over nickel over copper alloy 3 Terminal platings: gold over nickel over copper alloy 4 Terminal platings: tin over copper alloy 5 Terminal contact platings: gold over nickel alloy 6 Terminal contact platings: silver over nickel alloy *Manufacturer reserves the right to change product specification without prior notice. Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com 1S-Series - 1S1 Ordering Scheme, 1SM Ordering Scheme | 3 1S1 MSP 1 1 Series 2 Poles 3 Circuit 1 SERIES 1S1 Sub-Miniature Rocker Switch R2 4 Actuator Style 2 M6 Q E 5 Actuator Color 6 Termination 7 Contacts 6 TERMINATION M1 Solder Lug M2 PCB M6 PC Mount, 90˚ horizontal M7 PC Mount, 90˚ vertical VS2 PC Mount, U bracket VS3 PC Mount, U bracket 2 POLES MSP Single pole - uses terminals 1, 2 & 3 MDP Double pole - uses terminals 1, 2, 3, 4, 5 & 6 M61 M71 VS21 8 Seal Snap-In, U bracket, 90˚ horizontal Snap-In, U bracket, 90˚ horizontal Snap-In, U bracket See page 8-9 for dimensional specifications. 3 CIRCUIT ( ) - momentary Position: 1 2 2-3, 5-6 Connected Terminals 1ON NONE 2ON NONE 3ON OFF 4(ON) OFF 5ON OFF 3 2-1, 5-4 ON (ON) ON (ON) (ON) 4 ACTUATOR STYLE R1 Small Rocker R2 Narrow Black Rocker R3 Medium Rocker 7 CONTACTS / TERMINALS Contact Material Terminal Plating Rating Approvals G silver 1 gold over silver 3A 125VAC or 28VDC, , 1.5A 250VAC K gold 2 tin 3 0.4VA max 20V max (AC/DC) N/A P silver 1 tin 3 3A 125VAC or 28VDC, , 1.5A 250VAC 1 1 Q silver silver 3A 125VAC or 28VDC, , 1.5A 250VAC 2 2 R gold gold 0.4VA max 20V max (AC/DC) N/A 8 EPOXY SEAL E Epoxy Seal O without Epoxy Seal Notes: Tin option available with M1 termination. 1 Movable contact and terminal platings: silver over copper alloy 2 Movable contact and terminal platings: gold over nickel over copper alloy 3 Terminal platings: tin over nickel over copper alloy 5 ACTUATOR COLOR 1 White 2 Black 3 Red Other colors available, consult factory. 1SM WMSP 1 1 Series 2 Poles 3 Circuit 1 SERIES 1SM Sealed Surface Mount Sub-Miniature Rocker Switch 2 POLES WMSP Single pole - uses terminals 1, 2 & 3 3 CIRCUIT ( ) - momentary Position:1 2 2-3 Connected Terminals 1 ONNONE 2 ONNONE 3 ONOFF 4 (ON)OFF 5 ONOFF 4 ACTUATOR STYLE R2 Narrow Black Rocker 5 TERMINATION M6 Surface Mount, 90° flat - horizontal / side S6 Surface Mount, 90° horizontal / back S7 Surface Mount, 90° vertical See page 10 for dimensional specifications. 3 2-1 ON (ON) ON (ON) (ON) R2 4 Actuator Style M2 G E 5 Termination 6 Contacts 7 Seal 8 Packaging 6 CONTACTS / TERMINALS Contact Material Terminal Plating Rating Approvals G silver 1 gold over silver 3A 125VAC or 28VDC, IP67 1.5A 250VAC K gold 2,5 tin 4 0.4VA max 20V max (AC/DC) IP67 P silver 1,6 tin 4 3A 125VAC or 28VDC, IP67 1.5A 250VAC Q silver 1 silver 1 3A 125VAC or 28VDC, IP67 1.5A 250VAC 2 3 R gold gold 0.4VA max 20V max (AC/DC) IP67 7 EPOXY SEAL E Epoxy Seal O without Epoxy Seal 8 PACKAGING T/R tape reel - 500 pieces per reel Switches are bulk packed, unless T/R is specified at the end of the part number. Notes: Tin option not available with M1 termination. 1 Movable contact and terminal platings: silver over copper alloy 2 Movable contact platings: gold over nickel over copper alloy 3 Terminal platings: gold over nickel over copper alloy 4 Terminal platings: tin over copper alloy 5 Terminal contact platings: gold over nickel alloy 6 Terminal contact platings: silver over nickel alloy Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com 4 | 1S-Series - 1SS-Series Dimensional Specifications 1SS-Series Dimensional Specifications: in. [mm] Single Pole Double Pole EPOXY SEAL EPOXY SEAL 6 5 4 3 2 1 Actuator Options R1 R2 Termination Options M1 STD. Solder Lug SP M2 PC Thru-Hole DP SP P.C.MOUNTING EPOXY SEAL EPOXY SEAL EPOXY SEAL DP EPOXY SEAL THK .020 [0.50] THK .020 [0.50] M6 Single Pole P.C.MOUNTING EPOXY SEAL 1 2 3 M6 Double Pole P.C.MOUNTING EPOXY SEAL 4 5 6 1 2 3 Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com 3 2 1 1S-Series - 1SS-Series Dimensional Specifications | 5 1SS-Series Dimensional Specifications: in. [mm] M7 Single Pole Termination Options P.C.MOUNTING EPOXY SEAL 3 2 1 M7 Double Pole P.C.MOUNTING EPOXY SEAL 6 5 4 3 2 1 VS2 Single Pole P.C.MOUNTING EPOXY SEAL 1 2 3 VS2 Double Pole P.C.MOUNTING EPOXY SEAL 4 5 6 Snap-In Termination Options M61 M71 VS21 * PC Mounting for M61, M71, VS21 refer to M6, M7, VS2 respectively. Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com 6 | 1S-Series - 1S1-Series Dimensional Specifications 1S1-Series Dimensional Specifications: in. [mm] Single Pole Double Pole Actuator Options R1 R2 R3 Termination Options M1 STD. Solder Lug Single Pole M2 PC Thru-Hole Double Pole Single Pole M6 Single Pole Double Pole P.C.MOUNTING 1 2 3 M6 Double Pole P.C.MOUNTING Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com 1S-Series - 1S1-Series Dimensional Specifications | 7 1S1-Series Dimensional Specifications: in. [mm] M7 Single Pole Termination Options P.C.MOUNTING 3 2 1 M7 Double Pole P.C.MOUNTING 6 5 4 3 2 1 VS2-VS3 Single Pole P.C.MOUNTING VS3 VS2 VS2-VS3 Double Pole P.C.MOUNTING VS2 Snap-In Termination Options M61 M71 VS21 * PC Mounting for M61, M71, VS21 refer to M6, M7, VS2 respectively. Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com VS3 8 | 1S-Series - 1SM-Series Dimensional Specifications 1SM-Series Dimensional Specifications: in. [mm] M6 Single Pole S6 Single Pole EPOXY SEAL EPOXY SEAL S7 Single Pole EPOXY SEAL Termination Options M6 S6 S7 Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com Reps & Contact | 9 Authorized Sales Representatives Click on the group name on the map below to find your local representative or visit www.carlingtech.com/findarep. « « Matera W. Canada Matera E. Canada MIDWEST DM Michigan TEMCO Northwest Alaska, Hawaii « NORTHERN Hanna Lind Ltd. Melody Emery Sierra Bridge Marketing Omega Limited Dy-tronix Inc. LD. Allen Norris DM Assoc East Pacent DM Assoc TSI North TSI WEST Signal Enterprises Luscombe Engineering Pinnacle Marketing Matrix DM Mexico South America Mexico « « Sunbelt Components SOUTHEAST ProRep Solutions LATIN AMERICA Americas Europe Middle East Africa Asia-Pacific Oceania About Carling Founded in 1920, Carling Technologies is a leading manufacturer of electrical and electronic switches and assemblies, circuit breakers, electronic controls, power distribution units, and multiplexed power distribution systems. With four ISO registered manufacturing facilities and technical sales offices worldwide, Carling Technologies Sales, Service and Engineering teams do much more than manufacture electrical components, they engineer powerful solutions! To learn more about Carling please visit www.carlingtech.com/company-profile. To view all of Carling’s environmental, quality, health & safety certifications please visit www.carlingtech.com/environmental-certifications Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com Worldwide Headquarters Carling Technologies, Inc. 60 Johnson Avenue, Plainville, CT 06062 Phone: 860.793.9281 Fax: 860.793.9231 Email: [email protected] Northern Region Sales Office: [email protected] Southeast Region Sales Office: [email protected] Midwest Region Sales Office: [email protected] West Region Sales Office: [email protected] Latin America Sales Office: [email protected] Asia-Pacific Headquarters Carling Technologies, Asia-Pacific Ltd., Kowloon, Hong Kong Phone: Int + 852-2737-2277 Fax: Int + 852-2736-9332 Email: [email protected] Shenzhen, China: [email protected] Shanghai, China: [email protected] Pune, India: [email protected] Kaohsiung, Taiwan: [email protected] Yokohama, Japan: [email protected] Europe | Middle East | Africa Headquarters Carling Technologies LTD 4 Airport Business Park, Exeter Airport, Clyst Honiton, Exeter, Devon, EX5 2UL, UK Phone: Int + 44 1392.364422 Fax: Int + 44 1392.364477 Email: [email protected] Germany: [email protected] France: [email protected] www.carlingtech.com REV_06_2016