2SS/2S1/2SM 2S-Series SUB-MINIATURE TOGGLES The 2S family of sub-miniature toggle switches is composed of three switch series; the 2S1-Series toggle switch, the 2SS-Series sealed toggle switch, and the 2SM-Series surface mount sealed sub-miniature toggle switch. All of these series offer a variety of ratings, circuits, contact materials, terminal platings, and actuator types. 2S1-Series 2SS-Series Product Highlights: IP67 Sealing 6 Actuator Options Surface, Thru Hole or Snap-in Mounting Dry-Circuit thru 3A 125VAC Ratings UL, CSA Approvals 2SM-Series Typical Applications: Telecommunications Instrumentation Networking Medical Equipment Resources: Download 3D CAD Files IGS STP Carling Technologies, Inc. 60 Johnson Avenue, Plainville, CT 06062 Email: [email protected] Application Support: [email protected] Phone: 860.793.9281 Fax: 860.793.9231 www.carlingtech.com 2 | 2S-Series - General Specifications, 2SS Ordering Scheme 2SS-Series 2S1-Series Sealed Sub-Miniature Toggle Switch Electrical Contact Rating refer to ordering scheme Electrical Life 30,000 make & break cycles @ full load Contact Resistance 20 mΩ max. initial @ 2-4 VDC 100mA for both silver & gold plated contacts Insulation Resistance 1000 MΩ min. Dielectric Strength 1500 Volts RMS @ sea level Physical Operating Temperature Index of Protection Solder Heat Resistance Actuator Travel 2SS 1 Series -30°C to +85°C 2SS & 2SM-Series: IP67 MIL-STD-202, Method 210 25° MSP 1 2 Poles 3 Circuit 1 SERIES 2SS Sealed Sub-Miniature Toggle Switch Sealed Surface Mount Sub-Miniature Toggle Switch Material Case Rocker Bushing Housing Switch Support Terminal Seal T1 B4 4 Actuator Style 5 Bushing all UL94 V-0 2S1-Series: Dially phthalate (DAP) 2SS-Series: Glass filled nylon 6/6, flame retardant, heat stabilized 2SM-Series: Glass filled nylon 4/6, flame retardant, heat stabilized 2S1-Series: Brass, chrome plated. 2SS & 2SM-Series: Brass, chrome plated or nylon, internal o-ring sealed 2S1-Series: Brass, nickel plated 2SS-Series: Glass filled nylon 6/6, flame retardant, heat stabilized (UL 94V-0) 2SM-Series: Glass filled nylon 4/6, flame retardant, heat stabilized (UL 94V-0) Stainless Steel Brass, tin plated Epoxy M6 G E 6 Termination 7 Contacts 8 Seal 6 TERMINATION M1 Solder Lug M2 PCB M6 PC Mount, 90˚ horizontal M61 Snap-In, U bracket, 90˚ horizontal M7 PC Mount, 90˚ vertical M71 Snap-In, U bracket, 90˚ horizontal VS2 PC Mount, U bracket VS21 Snap-In, U bracket 2 POLES MSP Single pole - uses terminals 1, 2 & 3 MDP Double pole - uses terminals 1, 2, 3, 4, 5 & 6 3 CIRCUIT ( ) - momentary Position:1 2 2-3, 5-6 Connected Terminals 1ON NONE 2ON NONE 3ON OFF 4(ON)OFF 5ON OFF 2SM-Series Sub-Miniature Toggle Switch See page 27-28 for dimensional specifications. 3 2-1, 5-4 ON (ON) ON (ON) (ON) 4 ACTUATOR STYLE / LENGTH T1 Round toggle .421” [10.70 mm] T2 Round toggle .240” [6.10 mm] T3 Round toggle .342” [8.70 mm] T4 Round toggle .551” [14.00 mm] P1 ESD resistant toggle .425” [10.80 mm] P2 ESD resistant toggle .268” [6.80 mm] P3 ESD resistant toggle .244” [6.20 mm] P4 ESD resistant toggle .291” [7.40 mm] 7 CONTACTS / TERMINALS Contact Material Terminal Plating Rating Approvals G silver 1 gold over silver 3A 125VAC or 28VDC, 1.5A 250VAC IP67 K gold 2 tin 3 0.4VA max 20V max (AC/DC) IP67 P silver 1 tin 3 3A 125VAC or 28VDC, 1.5A 250VAC IP67 R gold 2 gold 2 0.4VA max 20V max (AC/DC) IP67 8 EPOXY SEAL E Epoxy Seal O without Epoxy Seal Notes: Tin option not available with M1 terminal. 1 Movable contact & terminal platings: silver over copper alloy 2 Movable contact & terminal platings: gold over nickel over copper alloy 3 Terminal platings: tin over nickel over copper alloy 5 BUSHING B1 Threaded B4 Unthreaded *Manufacturer reserves the right to change product specification without prior notice. Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com 2S-Series - 2S1 Ordering Scheme, 2SM Ordering Scheme | 3 2S1 1 Series MSP 1 2 Poles 3 Circuit T1 4 Actuator Style 1 SERIES 2S1 Sub-Miniature Toggle Switch 2 Connected Terminals NONE NONE OFF OFF OFF 4 ACTUATOR STYLE / LENGTH T1 Round toggle .374” [9.50 mm] T2 Round toggle .236” [6.00 mm] 2SM 8 Seal M71 Right Angle PC Thru Hole, vertical VS2 PC Mount, U bracket VS21Snap-In, U bracket 7 CONTACTS / TERMINALS Contact Material Terminal Plating Rating Approvals G silver 2 gold over silver 3A 125VAC or 28VDC, , 1.5A 250VAC 8 3,6 5 K gold tin 0.4VA max 20V max (AC/DC) N/A P8 silver 2,7 tin 5 3A 125VAC or 28VDC, , 1.5A 250VAC Q silver 2 silver 2 3A 125VAC or 28VDC, , 1.5A 250VAC 3 4 R gold gold 0.4VA max 20V max (AC/DC) N/A 3 2-1, 5-4 ON (ON) ON (ON) (ON) T3 Round toggle .311” [7.90 mm] T4 Round toggle .449” [11.40 mm] 8 EPOXY SEAL E Epoxy Seal O without Epoxy Seal Notes: Tin option available with PC type terminations only. 1 All Switches come with standard nut, washer and locking ring shipped bulk. B5 & B7 bushing styles use small locking ring. See page 76-77` 2 Movable contact and terminal platings: silver over copper alloy 3 Movable contact and terminal platings: gold over nickel over copper alloy 4 Terminal platings: gold over nickel over copper alloy 5 Terminal platings: tin over copper alloy 6 Terminal contact platings: gold over nickel alloy 7 Terminal contact platings: silver over nickel alloy 8 Not available with M1 terminal MSP 1 2 Poles 7 Contacts See page 29-30 for dimensional specifications. 5 BUSHING 1 B1 Threaded Standard, keyway B2 Non-Threaded Standard, keyway B3 Threaded Short, keyway B4 Non-Threaded Short, keyway B5 High Torque, flat, .276” B6 High Torque, keyway, .276” B7 Long threaded B8 Non threaded Long, keyway 1 Series M6 Q E 6 Termination 6 TERMINATION M1 Solder Lug M2 PCB M6 PC Mount, 90˚ horizontal M61 Snap-In, Right Angle M7 PC Mount, 90˚ vertical 2 POLES MSP Single pole - uses terminals 1, 2 & 3 MDP Double pole - uses terminals 1, 2, 3, 4, 5 & 6 3 CIRCUIT ( ) - momentary Position:1 2-3, 5-6 1ON 2ON 3ON 4(ON) 5ON B4 5 Bushing 3 Circuit 1 SERIES 2SM Sealed Surface Mount Sub-Miniature Toggle Switch 2 POLES MSP Single pole - uses terminals 1, 2 & 3 T1 M6 G E 4 Actuator Style 5 Termination 6 Contacts 7 Seal 8 Packaging 5 TERMINATION K6 Surface Mount, .433” [11.00 mm] L6 Surface Mount, .354” [9.00 mm] M6 Surface Mount, 90° flat, .286” [7.26 mm] M7 Surface Mount, 90° vertical S6 Surface Mount, 90°, .353” [8.96 mm] See page 31 for dimensional specifications. 3 CIRCUIT ( ) - momentary Position:1 2 2-3 Connected Terminals 1 ONNONE 2 ONNONE 3 ONOFF 4 (ON)OFF 5 ONOFF 3 2-1 ON (ON) ON (ON) (ON) 4 ACTUATOR STYLE / LENGTH 1 T1 Round toggle .425” [10.80 mm] T2 Round toggle .240” [6.10 mm] P1 ESD resistant plastic toggle .425” [10.80 mm] P2 ESD resistant plastic toggle .268” [6.80 mm] P3 ESD resistant plastic toggle .244” [6.20 mm] P4 ESD resistant plastic toggle .291” [7.40 mm] Notes: Tin option available with PC type terminations only. 1 Bushing is unthreaded .177” [4.50 mm] height 2 Movable contact & terminal platings: silver over copper alloy 3 Movable contact & terminal platings: gold over nickel over copper alloy 4 Terminal platings: tin over nickel over copper alloy 6 CONTACTS / TERMINALS Contact Material Terminal Plating Rating Approvals G silver 2 gold over silver 3A 125VAC or 28VDC, 1.5A 250VAC IP67 K gold 3 tin 4 0.4VA max 20V max (AC/DC) IP67 2 4 P silver tin 3A 125VAC or 28VDC, 1.5A 250VAC IP67 Q silver 2 silver 2 3A 125VAC or 28VDC, 1.5A 250VAC IP67 R gold 3 gold 3 0.4VA max 20V max (AC/DC) IP67 7 EPOXY SEAL E Epoxy Seal O without Epoxy Seal 8 PACKAGING T/R tape reel - 500 pieces per reel Switches are bulk packed, unless T/R is specified at the end of the part number. Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com 4 | 2S-Series - 2SS-Series Dimensional Specifications 2SS-Series Dimensional Specifications: in. [mm] Double Pole Single Pole EPOXY SEAL EPOXY SEAL Actuator Options T1 T2 T3 T4 * B4 bushing shown. Subtract 2.55mm from toggle length for B1 bushing. P1 Plastic Toggle P2 Plastic Toggle P3 Plastic Toggle P4 Plastic Toggle Bushing Options B4 B1 * Subtract 2.55mm from toggle length for B1 bushing. Termination Options M1 STD. Solder Lug SP M2 PC Thru-Hole DP SP P.C.MOUNTING EPOXY SEAL EPOXY SEAL EPOXY SEAL DP EPOXY SEAL THK .020 [0.50] THK .020 [0.50] M6 Single Pole P.C.MOUNTING EPOXY SEAL Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com 2S-Series - 2SS-Series Dimensional Specifications | 5 2SS-Series Dimensional Specifications: in. [mm] M6 Double Pole Termination Options P.C.MOUNTING EPOXY SEAL M7 Single Pole P.C.MOUNTING EPOXY SEAL M7 Double Pole P.C.MOUNTING EPOXY SEAL VS2 Single Pole P.C.MOUNTING EPOXY SEAL VS2 Double Pole P.C.MOUNTING EPOXY SEAL Snap-In Termination Options M61 M71 VS21 * PC Mounting for M61,M71,VS21 refer to M6,M7,VS2 respectively. Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com 6 | 2S-Series - 2S1-Series Dimensional Specifications 2S1-Series Dimensional Specifications: in. [mm] Single Pole T1 Double Pole Actuator Options T3 T2 T4 Bushing Options B1 Threaded B2 Non-Threaded B3 Threaded B4 Non-Threaded 10-48 UNS 10-48 UNS FLAT B5 Threaded B6 Non-Threaded B7 Threaded B8 Non-Threaded 1/4-40 UNS 1/4-40 UNS Panel Mounting 10-48 INCH BUSHING WITHOUT LOCKING RING 1/4 INCH BUSHING WITH STD. LOCKING RING WITH STD. LOCKING RING WITHOUT LOCKING RING Termination Options M1 Standard Solder Lug M2 PC Thru-Hole Single Pole M1 Standard Solder Lug M2 PC Thru-Hole Double Pole THK .020 [0.50] M6 Single Pole THK .020 [0.50] THK .020 [0.50] THK .020 [0.50] P.C.MOUNTING Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com 2S-Series - 2S1-Series Dimensional Specifications | 7 2S1-Series Dimensional Specifications: in. [mm] M6 Double Pole Termination Options P.C.MOUNTING M7 Single Pole P.C.MOUNTING M7 Double Pole P.C.MOUNTING VS2-VS3 Single Pole P.C.MOUNTING VS2 VS2-VS3 Double Pole P.C.MOUNTING VS2 Snap-In Termination Options M61 VS3 M71 VS21 * PC Mounting for M61,M71,VS21 refer to M6,M7,VS2 respectively. Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com VS3 8 | 2S-Series - 2SM-Series Dimensional Specifications 2SM-Series Dimensional Specifications: in. [mm] K6 Single Pole L6 Single Pole EPOXY SEAL EPOXY SEAL M6 Single Pole M7 Single Pole EPOXY SEAL EPOXY SEAL S6 Single Pole EPOXY SEAL Actuator Options T2 T1 * Available with L6, S6, K6, M7 terminals only. P1 Plastic Toggle P2 Plastic Toggle P3 Plastic Toggle P4 Plastic Toggle Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com Reps & Contact | 9 Authorized Sales Representatives Click on the group name on the map below to find your local representative or visit www.carlingtech.com/findarep. « « Matera W. Canada Matera E. Canada MIDWEST DM Michigan TEMCO Northwest Alaska, Hawaii « NORTHERN Hanna Lind Ltd. Melody Emery Sierra Bridge Marketing Omega Limited Dy-tronix Inc. LD. Allen Norris DM Assoc East Pacent DM Assoc TSI North TSI WEST Signal Enterprises Luscombe Engineering Pinnacle Marketing Matrix DM Mexico South America Mexico « « Sunbelt Components SOUTHEAST ProRep Solutions LATIN AMERICA Americas Europe Middle East Africa Asia-Pacific Oceania About Carling Founded in 1920, Carling Technologies is a leading manufacturer of electrical and electronic switches and assemblies, circuit breakers, electronic controls, power distribution units, and multiplexed power distribution systems. With four ISO registered manufacturing facilities and technical sales offices worldwide, Carling Technologies Sales, Service and Engineering teams do much more than manufacture electrical components, they engineer powerful solutions! To learn more about Carling please visit www.carlingtech.com/company-profile. To view all of Carling’s environmental, quality, health & safety certifications please visit www.carlingtech.com/environmental-certifications Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com Worldwide Headquarters Carling Technologies, Inc. 60 Johnson Avenue, Plainville, CT 06062 Phone: 860.793.9281 Fax: 860.793.9231 Email: [email protected] Northern Region Sales Office: [email protected] Southeast Region Sales Office: [email protected] Midwest Region Sales Office: [email protected] West Region Sales Office: [email protected] Latin America Sales Office: [email protected] Asia-Pacific Headquarters Carling Technologies, Asia-Pacific Ltd., Kowloon, Hong Kong Phone: Int + 852-2737-2277 Fax: Int + 852-2736-9332 Email: [email protected] Shenzhen, China: [email protected] Shanghai, China: [email protected] Pune, India: [email protected] Kaohsiung, Taiwan: [email protected] Yokohama, Japan: [email protected] Europe | Middle East | Africa Headquarters Carling Technologies LTD 4 Airport Business Park, Exeter Airport, Clyst Honiton, Exeter, Devon, EX5 2UL, UK Phone: Int + 44 1392.364422 Fax: Int + 44 1392.364477 Email: [email protected] Germany: [email protected] France: [email protected] www.carlingtech.com REV_06_2016