3M-Series Datasheet [pdf]

3M-Series
3MS/3MN/3MA
MINIATURE PUSHBUTTONS
The 3M family of miniature pushbutton switches is composed of four switch series; the 3MNH-Series premium
sealed snap-action pushbutton, the 3MN-Series snap-action pushbutton, the 3MS-Series sealed snap-action
pushbutton, and the 3MA-Series alternate-action pushbutton. These PC mount pushbutton switches offer a
variety of ratings, circuits, contact materials, terminal platings, pushbutton styles, and optional color caps.
3MS-Series
3MN-Series
3MNH-Series
Product Highlights:
IP67 Sealing
ŠŠ Snap Action Contact Mechanism
ŠŠ Variety of Plunger and Bushing Lengths
ŠŠ Up to 14 Termination Choices
ŠŠ UL and cUL Approvals
ŠŠ Sleek Black Finish
ŠŠ
3MA-Series
Typical Applications:
Telecommunications
ŠŠ Performance Audio
ŠŠ Networking
ŠŠ Computers
ŠŠ Instrumentation
ŠŠ Low Power On/Off Designs
ŠŠ
Resources:
Download 3D CAD Files
IGS
STP
Carling Technologies, Inc.
60 Johnson Avenue, Plainville, CT 06062
Email: [email protected]
Application Support: [email protected]
Phone: 860.793.9281 Fax: 860.793.9231
www.carlingtech.com
2 | 3M-Series - General Specifications
3MNH-Series
3MS-Series
Premium Sealed
Miniature Pushbutton Switch
Sealed Snap-Action
Miniature Pushbutton Switch
3MA-Series
3MN-Series
Alternate Action
Miniature Pushbutton Switch
Snap-Action
Miniature Pushbutton Switch
Electrical
Contact Rating
Electrical Life
Contact Resistance
Insulation Resistance
Dielectric Strength
refer to ordering scheme
50,000 make & break
cycles @ full load
3MS-Series: 50 mΩ max. initial @
2-4 VDC 100mA for both silver &
gold plated contacts.
3MN, 3MA & 3NMH-Series: 10 mΩ max. initial @ 2-4 VDC 100mA for both silver & gold plated contacts.
1000 MΩ min.
1500 Volts RMS @ sea level
Physical
Operating Temperature -30°C to +85°C
Index of Protection
3MS-Series: IP68
3MNH-Series: IP67
Cap Installation Support 3MS-Series: 10 lbs. max.
Solder Heat Resistance MIL-STD-202, Method 210
Material
Case
3MS-Series: Glass filled nylon 6/6, flame retardant, heat stabilized (UL94V-0)
3MN, 3MA & 3NMH-Series: Dially phthalate (DAP) (UL 94V-0)
Plunger
3MS & 3MA-Series: Glass filled nylon or glass filled polyester (UL94V-0)
3MN-Series: Thermoplastic polyester, black
3NMH-Series: Brass, black finish with o-ring seal
Bushing
3MN-Series: Brass, nickel plated
3MA-Series: Zinc, nickel plated
3NMH-Series: Brass, black finish with o-ring seal
Housing
3MN & 3MA-Series: Stainless Steel
Switch Support Retainer 3MS-Series: Stainless Steel
Terminal Seal
Epoxy
*Manufacturer reserves the right to change product specification without prior notice.
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
3M-Series - 3MNH Ordering Scheme, 3MS Ordering Scheme | 3
3MNH
DP 1
1
Series
2
Pole
3
Circuit
PJ
1 SERIES
3MNH Premium Sealed Miniature Pushbutton Switch
5
Bushing
M2
Q E
6
Termination
7
Contacts
8
Seal
6 TERMINATION
M1 Solder Lug
M2 PC thru-hole
M51 Wire wrap, .711” [18.05 mm]
M52 Wire wrap, .924” [23.48 mm]
M52 Wire wrap, .386” [9.80 mm]
2 POLES
SP
Single pole - uses terminals 1, 2 & 3
DP
Double pole - uses terminals 1, 2, 3, 4, 5 & 6
3 CIRCUIT
( ) - momentary
Switching Position:
1
7
BJ
4
Plunger
7 CONTACTS / TERMINALS
Contact Material Terminal Plating Rating Approvals
G
silver 5 gold over silver (DP1) , IP67
[email protected] or 28VDC
[email protected]
(DP7)
[email protected] or 38VDC
silver 5 (DP1) Q
silver 5 , IP67
[email protected] or 28VDC [email protected]
(DP7)
[email protected] or 38VDC
R
gold 6 gold 7 0.4VA max @ 20V max (AC/DC) N/A
1
2
ONON
ON(ON)
Note: Plunger at rest in Position 1. Plunger depressed in Position 2.
4 PLUNGER 1
PJ .325 height [8.25 mm]
PA .157 height [4.00 mm]
PB .354 height [9.00 mm]
5 BUSHING 2
BJ 3 Threaded 15/32, flat, .553 height [14.05 mm]
BL 4 Threaded 15/32, flat, .295 height [7.49 mm]
8 EPOXY SEAL
E
Epoxy Seal
Notes:
1 PJ Plunger for maintained circuits only. PA and PB Plunger for momentary circuits only
2 Hardware includes (2) 2M1-HDW2 nuts, (1) 2M1-HDW11 washer, and (1) 2M1-HDW15 locking ring
3 BJ Bushing only available with PJ Plunger
4 BL Bushing only available with PA or PB Plunger
5 Movable contact & terminal platings: silver over copper alloy
6 Movable Contact platings: gold over nickel over copper alloy
7 Terminal platings: gold over nickel over copper alloy
3MS
1
Series
WSP E
2
Pole
3
Circuit
1 SERIES
3MS Sealed Snap-Action Miniature Pushbutton Switch
2 POLES
WSP Single pole - uses terminals 1, 2 & 3
WDP Double pole - uses terminals 1, 2, 3, 4, 5 & 6
3 CIRCUIT
( ) - momentary
Switching Position:
7
1
2
2-3, 5-6
2-1, 5-4
ON(ON)
Note: Plunger at rest in Position 1. Plunger depressed in Position 2.
4 ACTUATOR STYLE
P1 Standard Plunger
P2 Long Plunger
P3 Short Plunger
5 BUSHING
B1 1Threaded, with keyway, .350 height [8.89 mm]
B4 Unthreaded, flatted, .250 height [6.35 mm]
Notes:
1 Hardware includes (2) 2M1-HDW2 nuts, (1) 2M1-HDW11 washer, and (1) 2M1-HDW15 locking ring
2 Movable contact and terminal platings: gold over nickel over copper alloy
3 Movable contact and terminal platings: silver over copper alloy
P1
4
Actuator Style
B1
5
Bushing
M6 Q E
6
Termination
7
Contacts
8
Seal
6 TERMINATION
M1 Solder Lug
M2 PCB
M6 PC Mount, 90° horizontal
M61 Snap-In, 90° horizontal
M7 PC Mount, 90° vertical
M71 Snap-In, 90° vertical
VS2 PC Mount, U bracket, .620” mounting x .461” height
VS21 Snap-In, U bracket, .620” mounting x .461” height
VS3 PC Mount, U bracket, .620” mounting x .630” height
VS31 Snap-In, vertical, .630” height
VS4 PC Mount, U bracket, .750” mounting x .461” height
VS41 Snap-In, vertical, .461 height
VS5 PC Mount, U bracket, .750” mounting x .630” height
VS51 Snap-In, vertical, .630” height
7 CONTACTS / TERMINALS
Contact Material Terminal Plating Rating Approvals
G
silver 3 gold over silver 1A 120VAC or 38VDC
, IP68
silver 3 1A 120VAC or 38VDC
, IP68
Q
silver 3 R
gold 2 gold 2 0.4VA max 20V max (AC/DC) IP68
8 EPOXY SEAL
E
Epoxy Seal
O
without Epoxy Seal
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
4 | 3M-Series - 3MN Ordering Scheme
3MN-Series with Square Actuator
3MN
SP
1
Series
7
2
Poles
AP2
3
Circuit
3 2
5A
Actuator
Color
4
Bushing
5B
Frame
Color
M6 Q E
6
Termination
7
Contacts
8
Seal
3MN-Series with Plunger Actuator
3MN
1
Series
SP
2
Poles
7
3
Circuit
1 SERIES
3MN Snap-Action Miniature Pushbutton Switch
2 POLES
SP
Single pole - uses terminals 1, 2 & 3
DP
Double pole - uses terminals 1, 2, 3, 4, 5 & 6
3 CIRCUIT
( ) - momentary
Switching Position:
7
1
2
2-3, 5-6
2-1, 5-4
ON(ON)
Note: Plunger at rest in Position 1. Plunger depressed in Position 2.
4 ACTUATOR
Square Actuator (use with Color Options in Selection 5A & 5B)
AP1 Square with no frame
AP2 Square raised above frame
AP3 Square flush with frame
Plunger Actuator (use with Bushing Options in Selection 5)
P0 Flush Plunger
P1 Standard Plunger
P2 Short Plunger
5A ACTUATOR COLOR & 5B FRAME COLOR 3,4
1
2
3
White
Black
Red
4Orange
5Yellow
6Green
7Blue
8Brown
9Gray
OR
5 BUSHING
B6 Unthreaded (for terminations VS6-VS9 only)
B10 1 Threaded keyway
2
B11 Threaded with flat
B20 Unthreaded keyway
B21 Unthreaded with flat
P2
B6
M6 Q E
4
Bushing
5
Actuator
6
Termination
7
Contacts
8
Seal
6 TERMINATION
M1 Solder Lug
M2 PCB
M5-1 Wire Wrap .750 [19.05]
M5-2 Wire Wrap .964 [24.40]
M5-3 Wire Wrap .425 [10.80]
M6 PC Mount, 90° horizontal
M7 PC Mount, 90° vertical
VS2 PC Mount, U bracket, .620” mounting x .461” height
VS3 PC Mount, U bracket, .620” mounting x .630” height
VS4 PC Mount, U bracket, .750” mounting x .461 height
VS5 PC Mount, U bracket, .750” mounting x .630” height
VS6 PC Mount, U bracket, .461 height (for B6 bushing only)
VS7 PC Mount, U bracket, .630 height (for B6 bushing only)
VS8 PC Mount, U bracket, .461 height (for B6 bushing only)
VS9 PC Mount, U bracket, .630 height (for B6 bushing only)
7 CONTACTS / TERMINALS
Contact Material Terminal Plating Rating Approvals
G
silver 5 gold over silver 1A 125VAC or 28VDC
Q
silver 5 silver 5 1A 125VAC or 28VDC
R
gold 6 gold 6 0.4VA max 20V max (AC/DC) N/A
8 EPOXY SEAL
E
Epoxy Seal
O
without Epoxy Seal
Notes:
1 Hardware includes (2) 2M1-HDW2 nuts, (1) 2M1-HDW11 washer, and
(1) 2M1-HDW15 locking ring
2 Hardware includes (2) 2M1-HDW2 nuts, (1) 2M1-HDW11 washer, and
(1) 2M1-HDW16 locking ring
3 Tin option available with PC type terminations only.
4 Selection 5B is blank if actuator style is AP1 (no frame)
5 Black, white and red are standard. Other colors available, consult factory for details.
6 Movable contact & terminal platings: silver over copper alloy
7 Movable contact & terminal platings: gold over nickel over copper alloy
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
3M-Series - 3MA Ordering Scheme, 3M Accessories | 5
3MA-Series with Square Actuator
3MA
SP
1
Series
2
Poles
1
AP2
3
Circuit
3 2
5A
Actuator
Color
4
Bushing
5B
Frame
Color
M6 Q E
6
Termination
7
Contacts
8
Seal
3MA-Series with Plunger Actuator
3MA
1
Series
SP
1
2
Poles
PD
BD
M6 Q E
4
Bushing
5
Actuator
6
Termination
3
Circuit
1 SERIES
3MA Alternate Action Miniature Pushbutton Switch
2 POLES
SP Single pole - uses terminals 1, 2 & 3
DP Double pole uses terminals 1,2, 3, 4, 5 & 6
1
3P Three pole uses terminals 1,2, 3, 4, 5, 6, 7, 8 & 9
4P 1 Four pole uses terminals 1,2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12
3 CIRCUIT
( ) - momentary
Switching1
Position: 2-3, 5-6, 8-9, 11-12
1ON
2 *ON
*Available in SP & DP only.
2
Connected Terminals
NONE
NONE
3
2-1, 5-4, 8-7,11-10
ON
(ON)
4 ACTUATOR
Square Actuator (use with Color Options in Selection 5A & 5B)
AP1 Square with no frame
AP2 Square raised above frame
Plunger Actuator (use with Bushing Options in Selection 5)
PA Standard Plunger
PI Medium Plunger
PL Brass Chrome Plunger
PC Brass Chrome Plated Plunger with Cap (for BD bushing only)
PD Brass Chrome Plated Plunger (for BD bushing only)
5A ACTUATOR COLOR & 5B FRAME COLOR 4,5
1 White
4Orange
7Blue
2 Black
5Yellow
8Brown
3 Red
6Green
9Gray
OR
5 BUSHING
BD 1 Big bushing for PC, PD actuator 15/32”
B10 2 Threaded 1/4 - 40
B20 Unthreaded
B21 Unthreaded with flat
7
Contacts
8
Seal
6 TERMINATION
M1 Solder Lug
M2 PCB
M5-1 Wire Wrap .750
M5-2 Wire Wrap .964
M5-3 Wire Wrap .425
M5-4 Wire Wrap 1.062
M6 PC Mount, 90° horizontal
M7 PC Mount, 90° vertical
VS2 PC Mount, U bracket, .620” mounting x .461” height
VS3 PC Mount, U bracket, .620” mounting x .630” height
VS4 PC Mount, U bracket, .750” mounting x .461” height
VS5 PC Mount, U bracket, .750” mounting x .630” height
7 CONTACTS / TERMINALS
Contact Material Terminal Plating Rating Approvals
G
silver 6 gold over silver 6A 125VAC or 28VDC
3A 250VAC
K
gold 7 tin 8 0.4VA max 20V max (AC/DC) N/A
6
gold over silver 6A 125VAC or 28VDC
P
silver 3A 250VAC
silver 6 6A 125VAC or 28VDC
Q
silver 6 3A 250VAC
7
7
R
gold gold 0.4VA max 20V max (AC/DC) N/A
8 EPOXY SEAL
E
Epoxy Seal
O
without Epoxy Seal
Notes:
1 Hardware includes (2) 2M1-HDW2 nuts, (1) 2M1-HDW12 washer, and
(1) 2M1-HDW17 locking ring
2 Hardware includes (2) 2M1-HDW2 nuts, (1) 2M1-HDW11 washer, and
(1) 2M1-HDW15 locking ring
3 Tin option available with PC type terminations only.
4 Available with circuit 1 only
5 Black, white and red are standard. Other colors available, consult factory for details.
6 Selection 5B is blank if actuator style is AP1 (no frame)
7 Movable contact & terminal platings: silver over copper alloy
8 Movable contact & terminal platings: gold over nickel over copper alloy
9 Terminal platings: tin over nickel over copper alloy, available for PC mount terminations only
3M-Series Accessories
To order a cap assembled on a switch, specify the switch number followed by the cap part number and the word “assembled”. Ex: 3MN-SP7-P2-B6-M6QE-C13ASSEMBLED. To order caps in bulk, specify the Series, followed by the cap. Ex: 3MN-C13
3MN
Optional Cap
1
Series
1 SERIES
3MN Fits 3MN, 3MS or 3MA
2 TOGGLE CAP SIZE
C1 Round 8 mm diameter
C2 Round 9.70 mm diameter
C3 Square 11.7 x 11.7 mm
C4 Round 5 mm diameter
C1 3
2
Toggle Cap Size
3
Color
3 CAP COLOR
1
White
2
Black
3
Red
C5 1 Round 15 mm diameter
C6 2 Brass Chrome Plated,
3.15 mm diameter
4
5
6
7
Orange
Yellow
Green
Blue
Notes:
1 For 3MA with PL Bushing
2 For 3MA with PD Bushing
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
6 | 3M-Series - 3MNH-Series Dimensional Specifications
3MNH-Series Dimensional Specifications: in. [mm]
Single Pole Maintained Circuit
Single Pole Momentary Circuit
OPTION
CODE
DIM. "A"
PA
.157 [4.00]
PB
.354 [9.00]
Double Pole Maintained Circuit
Double Pole Momentary Circuit
DIM"A"
FLAT THD.
15/32-32 UNS
Internal O-ring
sealed
O-ring
Epoxy Seal
OPTION
CODE
DIM. "A"
PA
.157 [4.00]
PB
.354 [9.00]
Panel Mounting
15/32-32 UNS FLAT-CUT
THREADED BUSHING
Termination Options
M1 Standard Solder Lug
M2 PC Thru-Hole
M5 Wire Wrap
DIM "A"
OPTION
CODE
DIM "A"
M5-1
.711 [18.05]
M5-2
.924 [23.48]
M5-3
.386 [9.80]
DIM "A"
THK .030 [0.75]
MODEL
DIM "A"
DP-1
.116 [2.95]
DP-7
.183 [4.65]
THK .030 [0.75]
THK .030 [0.75]
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
3M-Series - 3MS-Series Dimensional Specifications | 7
3MS-Series Dimensional Specifications: in. [mm]
Single Pole
Double Pole
EPOXY SEAL
EPOXY SEAL
3 N.C.
2 N.O.
1 COMM.
M6 Single Pole
6
3 N.C.
5
2 N.O.
4
1 COMM.
P.C.MOUNTING
EPOXY SEAL
1
3
2
M6 Double Pole
P.C.MOUNTING
EPOXY SEAL
4 5
6
1 2
3
Plunger Options
For B1 Bushing
For B4 Bushing
OPTION
CODE
P1
DIM "A"
P2
P3
OPTION
CODE
DIM. "A"
.181
[4.60]
.228
[5.80]
.087
[2.20]
P1
DIM "A"
P2
P3
Bushing Options
B4
B1
1/4-40 UNS
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
DIM. "A"
.276
[7.00]
.323
[8.20]
.181
[4.60]
8 | 3M-Series - 3MS-Series Dimensional Specifications
3MS-Series Dimensional Specifications: in. [mm]
Termination Options
M1
M2
EPOXY SEAL
EPOXY SEAL
THK .030 [0.75]
THK .030 [0.75]
M7 Single Pole
P.C.MOUNTING
EPOXY SEAL
3
2
1
M7 Double Pole
P.C.MOUNTING
EPOXY SEAL
6
3
5
2
4
1
VS2-VS3 Single Pole
P.C.MOUNTING
DIM "A"
OPTION
CODE
DIM.'A'
VS2
.461
[11.70]
VS3
.630
[16.00]
EPOXY SEAL
1
2
3
VS2-VS3 Double Pole
P.C.MOUNTING
OPTION
CODE
DIM.'A'
VS2
.461
[11.70]
VS3
.630
[16.00]
EPOXY SEAL
DIM "A"
4
5
6
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
3M-Series - 3MS-Series Dimensional Specifications | 9
3MS-Series Dimensional Specifications: in. [mm]
VS4-VS5 Single Pole
Termination Options
P.C.MOUNTING
DIM "A"
OPTION
CODE
DIM.'A'
VS4
.461
[11.70]
VS5
.630
[16.00]
EPOXY SEAL
1
2
3
VS4-VS5 Double Pole
P.C.MOUNTING
OPTION
CODE
DIM.'A'
VS4
.461
[11.70]
VS5
.630
[16.00]
EPOXY SEAL
4
5
6
Snap-In Termination Options
M61
VS21, VS31
M71
VS41, VS51
* PC Mounting for M61, M71, VS21, VS31, VS41, VS51 refer to M6, M7, VS2, VS3, VS4, VS5 respectively.
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
10 | 3M-Series - 3MN-Series Dimensional Specifications
3MN-Series Dimensional Specifications: in. [mm]
Single Pole
Double Pole
3 N.C.
6
3 N.C.
2 N.O.
5
2 N.O.
4
1 COMM.
1 COMM.
1/4-40UNS
Plunger Options
For B6 Bushing
For B1, B2, B3, B4 Bushing
OPTION
CODE
P0
DIM. "A"
P1
P2
1/4-40UNS
DIM. "A"
OPTION
CODE
.000
[0.00]
.213
[5.40]
.091
[2.30]
DIM. "A"
.157
[4.00]
.106
[2.70]
P1
P2
Actuator Options for Snap-In Front Mount
AP1
DIM. "A"
PANEL MOUNTING
*
MAX. TYP.
TO
PANEL THICKNESS
* Increase this dimension to .620/.625
[15.75/15.88] for .091/.125 [2.31/3.18]
thk. panels.
AP2 with Frame
PANEL MOUNTING
*
MAX. TYP.
TO
PANEL THICKNESS
* Increase this dimension to .620/.625
[15.75/15.88] for .091/.125 [2.31/3.18]
thk. panels.
AP3 Flush CAP
PANEL MOUNTING
*
MAX. TYP.
TO
PANEL THICKNESS
* Increase this dimension to .620/.625
[15.75/15.88] for .091/.125 [2.31/3.18]
thk. panels.
B1 Threaded Standard
B2 Non-Threaded
1/4-40UNS
Bushing Options
B3 Threaded Standard
B4 Non-Threaded
B6 Non-Threaded
(FOR TERMINATION OPTIONS VS6-VS9 ONLY)
1/4-40UNS
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
3M-Series - 3MN-Series Dimensional Specifications | 11
3MN-Series Dimensional Specifications: in. [mm]
M1 Standard Solder Lug
Termination Options
M2 PC Thru-Hole
M5 Wire Wrape
DIM. "A"
THK .030 [0.75]
M6 Single Pole
THK .030 [0.75]
THK .030 [0.75]
COMM. N.O. N.C.
M6 Double Pole
COMM. N.O. N.C.
M7 Single Pole
OPTION
CODE
DIM. "A"
M5-1
.750
[19.05]
M5-2
.964
[24.48]
M5-3
.425
[10.80]
P.C.MOUNTING
P.C.MOUNTING
P.C.MOUNTING
3 N.C.
2 N.O.
1 COMM.
M7 Double Pole
P.C.MOUNTING
N.C.
N.O.
COMM.
VS2-VS3 Single Pole
DIM 'A'
P.C.MOUNTING
OPTION
CODE
DIM.'A'
VS2
.461
[11.70]
VS3
.630
[16.00]
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
12 | 3M-Series - 3MN-Series Dimensional Specifications
3MN-Series Dimensional Specifications: in. [mm]
VS2-VS3 Double Pole
DIM 'A'
Termination Options
P.C.MOUNTING
OPTION
CODE
DIM.'A'
VS2
.461
[11.70]
VS3
.630
[16.00]
VS4-VS5 Single Pole
DIM 'A'
P.C.MOUNTING
OPTION
CODE
DIM.'A'
VS4
.461
[11.70]
VS5
.630
[16.00]
VS4-VS5 Double Pole
DIM 'A'
P.C.MOUNTING
OPTION
CODE
DIM.'A'
VS4
.461
[11.70]
VS5
.630
[16.00]
VS4-VS5
Pole
VS6-VS7 Double
Single Pole
(FOR B6 BUSHING ONLY)
DIM 'A'
P.C.MOUNTING
OPTION
CODE
DIM.'A'
VS6
.461
[11.70]
VS7
.630
[16.00]
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
3M-Series - 3MN-Series Dimensional Specifications | 13
3MN-Series Dimensional Specifications: in. [mm]
VS6-VS7 Double Pole
Termination Options
P.C.MOUNTING
(FOR B6 BUSHING ONLY)
DIM 'A'
OPTION
CODE
DIM.'A'
VS6
.461
[11.70]
VS7
.630
[16.00]
VS8-VS9 Single Pole
P.C.MOUNTING
(FOR B6 BUSHING ONLY)
OPTION
CODE
DIM.'A'
VS8
.461
[11.70]
VS9
.630
[16.00]
DIM 'A'
VS8-VS9 Double Pole
P.C.MOUNTING
(FOR B6 BUSHING ONLY)
DIM 'A'
OPTION
CODE
DIM.'A'
VS8
.461
[11.70]
VS9
.630
[16.00]
Snap-In Termination Options
VS21, VS31
VS41, VS51
* PC Mounting for VS21, VS31, VS41, VS51 refer to VS2, VS3, VS4, VS5 respectively.
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
14 | 3M-Series - 3MA-Series Dimensional Specifications
3MA-Series Dimensional Specifications: in. [mm]
Single Pole
Double Pole
EPOXY SEAL
EPOXY SEAL
3
6
3
2
5
2
4
1
1
1/4-40UNS
1/4-40UNS
Three Pole
Four Pole
EPOXY SEAL
EPOXY SEAL
89 56 23
7
4
12
11
1
10
8
9
7
5
6
4
1/4-40UNS
1/4-40UNS
Actuator Options for Snap-In Front Mount
AP1
PANEL MOUNTING
*
MAX. TYP.
TO
PANEL THICKNESS
* Increase this dimension to .620/.625
[15.75/15.88] for .091/.125 [2.31/3.18]
thk. panels.
AP2 with Frame
PANEL MOUNTING
*
MAX. TYP.
TO
PANEL THICKNESS
* Increase this dimension to .620/.625
[15.75/15.88] for .091/.125 [2.31/3.18]
thk. panels.
Plunger Options
PA, PI
DIM "A"
PL
OPTION
CODE
PA
PI
PC
PD
DIM "A"
.299 [7.60]
.244 [6.20]
* Plunger material: Brass Nickel Plated
* Plunger material: Brass Chrome Plated
* PC,PD must configure with BD bushing
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
2
3
1
3M-Series - 3MA-Series Dimensional Specifications | 15
3MA-Series Dimensional Specifications: in. [mm]
B10 Threaded Standard
B20 Non-Threaded
1/4-40UNS
Bushing Options
B21 Non-Threaded
BD Threaded Standard
1/4-40UNS
M1 Standard Solder Lug
EPOXY SEAL
15/32-32UNS
Termination Options
M2 PC Thru-Hole
M5 Wire Wrape
EPOXY SEAL
EPOXY SEAL
DIM 'A'
THK .030 [0.75]
THK .030 [0.75]
THK .030 [0.75]
M6 Single Pole
OPTION
CODE
DIM.'A'
M5-1
.750 [19.05]
M5-2
.964 [24.48]
M5-3
.425 [10.80]
M5-4
1.062 [26.97]
P.C.MOUNTING
EPOXY SEAL
1
3
2
M6 Double Pole
P.C.MOUNTING
EPOXY SEAL
5
6
4
2
1
3
M7 Single Pole
P.C.MOUNTING
EPOXY SEAL
3
2
1
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
16 | 3M-Series - 3MA-Series Dimensional Specifications
3MA-Series Dimensional Specifications: in. [mm]
Termination Options
M7 Double Pole
P.C.MOUNTING
EPOXY SEAL
M7 Three Pole
6
3
5
2
4
1
P.C.MOUNTING
EPOXY SEAL
M7 Four Pole
9
8
6
5
3
2
7
4
1
P.C.MOUNTING
EPOXY SEAL
12
9
11 8
6
5
3
2
7
4
1
10
VS2-VS3 Single Pole
P.C.MOUNTING
"A"
EPOXY SEAL
OPTION
CODE
DIM.'A'
VS2
.461
[11.70]
VS3
.630
[16.00]
VS2-VS3 Double Pole
P.C.MOUNTING
"A"
EPOXY SEAL
OPTION
CODE
DIM.'A'
VS2
.461
[11.70]
VS3
.630
[16.00]
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
3M-Series - 3MA-Series Dimensional Specifications | 17
3MA-Series Dimensional Specifications: in. [mm]
Termination Options
VS4-VS5 Single Pole
P.C.MOUNTING
DIM "A"
OPTION
CODE
DIM.'A'
VS4
.461
[11.70]
VS5
.630
[16.00]
EPOXY SEAL
VS4-VS5 Double Pole
P.C.MOUNTING
DIM "A"
OPTION
CODE
DIM.'A'
VS4
.461
[11.70]
VS5
.630
[16.00]
EPOXY SEAL
Panel Mounting
1/4 INCH BUSHING
B10
B20
15/32 INCH BUSHING
B21
BD
Plunger Caps
C1
C2
C3
C5
C6
C7
For PL plunger only
For PD plunger only
CAP AND FRAME COLORS
For PL plunger only
1
White
6
2
Black
7
Green
Blue
3
Red
8
Brown
4
Orange
9
Gray
5
Yellow
MATERIAL: ABS for C1~C5, C7
MATERIAL: Chrome plated brass for C6
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
18 | Notes
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
Reps & Contact | 19
Authorized Sales Representatives
Click on the group name on the map below to find your local representative or visit
www.carlingtech.com/findarep.
«
«
Matera
W. Canada
Matera
E. Canada
MIDWEST
DM
Michigan
TEMCO Northwest
Alaska, Hawaii
«
NORTHERN
Hanna Lind Ltd.
Melody
Emery
Sierra
Bridge Marketing
Omega Limited
Dy-tronix Inc.
LD. Allen
Norris
DM Assoc
East
Pacent
DM
Assoc
TSI North
TSI
WEST
Signal
Enterprises
Luscombe
Engineering
Pinnacle Marketing
Matrix
DM Mexico
South America
Mexico
«
«
Sunbelt Components
SOUTHEAST
ProRep
Solutions
LATIN AMERICA
Americas
Europe
Middle East
Africa
Asia-Pacific
Oceania
About Carling
Founded in 1920, Carling Technologies is a leading manufacturer of electrical and electronic switches
and assemblies, circuit breakers, electronic controls, power distribution units, and multiplexed power
distribution systems. With four ISO registered manufacturing facilities and technical sales offices worldwide,
Carling Technologies Sales, Service and Engineering teams do much more than manufacture electrical
components, they engineer powerful solutions! To learn more about Carling please visit
www.carlingtech.com/company-profile.
To view all of Carling’s environmental, quality, health & safety certifications please visit
www.carlingtech.com/environmental-certifications
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
Worldwide Headquarters
Carling Technologies, Inc.
60 Johnson Avenue, Plainville, CT 06062
Phone: 860.793.9281 Fax: 860.793.9231
Email: [email protected]
Northern Region Sales Office: [email protected]
Southeast Region Sales Office: [email protected]
Midwest Region Sales Office: [email protected]
West Region Sales Office: [email protected]
Latin America Sales Office: [email protected]
Asia-Pacific Headquarters
Carling Technologies, Asia-Pacific Ltd.,
Kowloon, Hong Kong
Phone: Int + 852-2737-2277 Fax: Int + 852-2736-9332
Email: [email protected]
Shenzhen, China: [email protected]
Shanghai, China: [email protected]
Pune, India: [email protected]
Kaohsiung, Taiwan: [email protected]
Yokohama, Japan: [email protected]
Europe | Middle East | Africa Headquarters
Carling Technologies LTD
4 Airport Business Park, Exeter Airport,
Clyst Honiton, Exeter, Devon, EX5 2UL, UK
Phone: Int + 44 1392.364422 Fax: Int + 44 1392.364477
Email: [email protected]
Germany: [email protected]
France: [email protected]
www.carlingtech.com
REV_06_2016