L-Series L-Series SEALED ROCKER SWITCHES The L-Series rocker switch is an innovative product offering total design flexibility, while at the same time setting new standards for performance and reliability. Its versatile design features include a neatly proportioned size that fits into an industry standard mounting hole of 1.734 x .867 (44.0mm x 22.0mm), countless unique choices for ratings, circuits, colors, illuminations and laser etched legends. These single or double pole switches also feature a broad choice of actuator styles, colors, and lenses with up to twelve terminals offering an extensive range of switch and lamp circuit options, including LED or incandescent illumination. Additionally, an optional plug-in terminal connector enables pre-wiring of wire harness. Resources: Download 3D CAD Files IGS STP Watch Product Video Product Highlights: IP67 certified sealed front panel components Withstands temperatures from -40°C to +85°C Vibration, shock, thermoshock, moisture and salt spray resistant Typical Applications: Construction machinery Agricultural equipment On-highway transportation equipment Carling Technologies, Inc. 60 Johnson Avenue, Plainville, CT 06062 Email: [email protected] Application Support: [email protected] Phone: 860.793.9281 Fax: 860.793.9231 www.carlingtech.com 2 | L–Series Sealed Rocker Switches - Design Features L-Series Switch DESIGN FEATURES LED LIGHTING Utilize less current and are not affected by vibration, providing long lasting illumination. Available in 3 standard colors. LENS & LEGENDS Lens available in 2 sizes and 6 standard colors in either translucent or transparent materials. Numerous symbols and text available for imprinting or laser etching. SEAL PROTECTION Locks out elements such as water, dust & debris. Certified to IP67 for front panel components. ACTUATOR Available in rocker or paddle styles. Several standard color options also available. ROLLER PIN Eliminates need for lubricants, increasing the temperature range of the switch from -40˚ C to +85˚C [-40˚ F to 185˚ F]. TERMINALS Available with 2 industry standard termination options: .250 or .187 tabs with up to 12 terminal options. BASE Fits into industry standard mounting hole of 1.734 x .867 in [44.0mm x 22.0mm]. *Manufacturer reserves the right to change product specification without prior notice. Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com L–Series Sealed Rocker Switches - General Specifications | 3 Electrical Environmental Contact Rating .4VA @ 24VDC (MAX) resistive 15 amps, 125VAC 10 amps, 250VAC 20 amps, 4-14VDC 15 amps, 15-28VDC Dielectric Strength 1250 Volts RMS between pole to pole 3750 Volts RMS between live parts and accessible surfaces Insulation Resistance 50 Megaohms Initial Contact Resistance 10 milliohms max. @ 4 VDC Life 100,000 cycles maintained, 50,000 cycles momentary at rated voltage and current Contacts 90/10 silver-nickel, silver tinoxide, gold Terminals Brass or copper/silver plate 3/16” (4.76mm) & 1/4” (6.3mm) Quick Connect terminations standard. Environmental IP67 for above panel components of the actual switch, representing an index of protection as applied to electrical equipment in accordance with IEC 529, BS 5490, DIN 400 50 & NFC 20 010. Corrosion Mixed Flowing Gas MFG Class III per ASTM B-827 & B-845, Method H, with 3 years exposure. Operating Temperature -40°C to + 85°C Vibration 1 Per Mil-Std 202F, Method 204D Test Condition A 0.06 DA or 10G’s 10-500 Hz. Tested with VCH connector. Test criteria - No loss of circuit during test and pre and post test contact resistance. Vibration 2 Resonance search 24-50 Hz 0.40 DA 50-2000 ±10 G’s peak Results Horizontal Axis 3-5 G’s max. Random 24 Hz 0.06 PSD-Gsq/Hz 60 Hz 0.50 100 Hz 0.50 200 Hz 0.025 2000 Hz 0.025 No loss of circuit during test; <10µ chatter. Shock Per Mil-Std 202F, Method 213B, Test Condition K @ 30G’s. Tested with VCH connector. Test criteria - No loss of circuit during test, pre, and post test contact resistance. Salt Spray Per Mil-Std 202F, Method 101D, Test Condition A, 48 Hrs. Thermal Shock Per Mil-Std 202F, Method 107F, Test Condition A, -55°C to 85°C. Test criteria - pre and post test contact resistance. Moisture Resistance Per Mil-Std 202F, Method 106F, Test Criteria - pre and post test contact resistance. Mechanical Endurance 250,000 cycles minimum Physical Lighted Incandescent - rated 10,000 hours LED - rated 100,000 hours 1/2 life (LED is internally ballasted for voltages to 24 VDC) Seals Rocker, base & bracket are sealed. Base Nylon 66 GF rated to 85°C with a flammability rating of 94V0. Actuator Basic actuator structure molded of thermoplastic polycarbonate with a hard Nylon 66 thermoplastic surface overlay. LockAcetal Lens Polycarbonate rated at 100°C Function 2 & 3 Position Rocker Style Bracket Nylon Zytel 1.970 Connector Nylon 66 rated at 85°C. Polarized. Actuator Travel (Angular Displacement) .260 [6.60] .390 [9.91] 2 position 3 positions 26° 13° from center .867 [22.02] 1.734 [44.04] 1.020 [25.91] TEST CUT HOLE IN ACTUAL MATERIAL MOUNTING HOLE .100 [2.54] 2.265 [57.53] 3.055 [77.60] Panel Thickness Range Acceptable Panel Thickness .030 to .156 (.76mm to 3.96mm) Recommended: .030, .062, .093, .125 and .156 .230 X .031 [5.84 X .79] T1 BAT T2 OUTPUT (LOAD) 1.300 [33.02] .344 [8.74] 1.570 [39.88] Mounting Specifications T3 GROUND PADDLE STYLE ACTUATOR Q.C. SELECTION GUIDE Email: [email protected] Application Support: [email protected] WIRE GAGE COMPANY PACKARD Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com SERIES PART NO. MM 2 AWG 12084590 12 3.0 4 | L-Series Sealed Rocker Switches – Ordering Scheme L 11 E 3 C H N 1 2 Circuit 4 5 6 Termination Illumination Lamp 3 Rating 7 Lamp 1 SERIES L 9 Actuator 1 48 10 11 12 Lens Style Lens Style Legend & Color & Color 13 14 Legend Actuator Orientation Lens Legend 5 ILLUMINATION Lamp #1:above terminals 9 & 10 end of switch.; Lamp #2 above terminals 11 & 12 end of switch. Positive (+) and negative (-) symbols apply to LED lamps only. 2 CIRCUIT 2 Terminal Orientation ( ) - momentary SP - single pole - uses terminals 1, 2 & 4. DP - double pole uses terminals 5, 6 & 8. Terminals 9, 10 & 11 for lamp circuit only. Position:1 2 SP DP 2 & 4, 6 & 8 Connected Terminals 1121 ONNONE 1222 (ON)NONE 1323 ONNONE 1424 ONNONE 1525 ON NONE 1626 ONOFF 1727 ON OFF 1828 (ON) OFF CIRCUITS WITH JUMPER TERMINALS 30* (2,4&5), (1,6&8) OFF, OFF 31 1, 2 & 5 2, 3 & 7 PROGRESSIVE CIRCUITS 51 3 & 4 2, 3 52 3 & 4 2, 3 53 (3 & 4) 2, 3 54 (3 & 4) 2, 3 55 (3 & 4) 2, 3 56 (3 & 4) 2, 3 57 3 & 4 2, 3 58* 2 & 4 2, 3 61 3 & 4, 7 & 8 2 & 3, 6 & 7 62 3 & 4, 7 & 8 2 & 3, 6 & 7 63 (3 & 4), (7 & 8) 2 & 3, 6 & 7 64 (3 & 4), (7 & 8) 2 & 3, 6 & 7 65 (3 & 4), (7 & 8) 2 & 3, 6 & 7 66 (3 & 4), (7 & 8) 2 & 3, 6 & 7 67 3 & 4, 7 & 8 2 & 3, 6 & 7 68 2 & 4, 7 & 8 2 & 4, OFF 69* 2 & 4, 1, 7 & 8 2 & 4, OFF 70 (2 & 4), (7 & 8) 2 & 4, 5 & 7 71 (2&4), (7 & 8) 2 & 4, 5 & 7 72 2 & 4, 7 & 8 2 & 4, 5 & 7 73 (2 & 4), (7 & 8) 2 & 4, OFF 80 2 & 4, 6 & 8 2 & 4, OFF HAZARD WARNING CIRCUITS A2 6,7 & 8, 3 & 4 NONE A3 6,7 & 8, 2 & 4 NONE * Available with ratings 1, 4, & E only. 3 1 & 2, 5 & 6 OFF OFF (OFF) ON (ON) ON (ON) (ON) (1,2&8), (4,5&6) 2, 4 & 8 1&2 OFF 1&2 (OFF) (1 & 2) (OFF) (OFF) 1&2 1 & 2, 5 & 6 OFF, OFF 1 & 2, 5 & 6 OFF, OFF (1 & 2), (5 & 6) (OFF, OFF) (OFF, OFF) OFF, OFF OFF, OFF (1 & 2), (5 & 7) 1 & 2, 5 & 7 1 & 2, 5 & 7 OFF, OFF OFF, 5 & 6 OFF, 1 & 2 OFF, 1 & 2 3 RATING 2 1 .4VA @ 28VDC Resistive 4 10A 250VAC 1/2 HP, 15A 125VAC 1/2 HP, No Listings B 15A 24V C 20A 18V D 20A 12V E 15A 12V G 20A 6V H 20A 3V 4 TERMINATION 2,3 1 3 3 A A 45 8 Bracket .250 (6.4mm) TAB (QC) .187 (4.7mm) TAB (QC) Lamps Illumination Type None # 1 Independent # 2 Independent # 1 Independent & # 2 Independent # 1 Dependent # 1 Independent & # 2 Dependent # 1 Independent & # 2 Dependent # 1 Dependent & # 2 Independent # 1 Both Independent & # 2 (in series) # 1 Dependent & # 2 Dependent # 2 Hazard # 1 Hazard Lamp Wired to Terminals 10+ 12+ 10+ 12+ 4+ 10+ 4+ 10+ 8+ 4+ 10+ 10+ 9119999999999- 4+ 1+ 6+ 6+ 991010- 1212- 6,7 LAMP (SAME CODING FOR BOTH SELECTIONS) Selection 6: above terminals 10 & 9; Selection 7: above terminals 12 & 11 No lamp 0 Incandescent 4 3V 5 6V 6 12V 7 18V 8 24V LED* Red AmberGreen 2VDC A LF 6VDC B MG 12VDC C NH 24VDC D PJ * Consult factory for “daylight bright”, blue/green and white LED options. Typical current draw for LED is 20ma. 8 BRACKET COLOR 1 Standard Bracket Rockerguard at Lamp 1 Rockerguard at Lamp 2 Black White Gray Red 1 2 34 A B CD E F GH 9 ACTUATOR STYLE AND COLOR 1 Black White Gray Red Laser Etched Rocker A B C D3 Paddle J N K M4 10 & 11 LENS STYLE AND COLOR Lens color for LEDs must be clear, white, or match color of LED. 0 - No Actuator Z - No Lens ClearWhite Amber Green Red Blue 1 - B G M T Large Transparent - 7 C H NU Large Translucent 3 - D J PV Bar Transparent - 9 E K RW Bar Translucent 5A - - -- Laser Etched background color 12 LASER ETCHED, LENS OR BODY LEGEND 00 No legend this location / no actuator For legend options & codes, visit us at carlingtech.com 13 LEGEND ORIENTATION 0 No legend (used with codes 11-18 in selection 12) 1 Orientation 1 - vertical, lamp 1 on top 2 Orientation 2 - horizontal, lamp 1 on right 3 Orientation 3 - vertical, lamp 1 on bottom 4 Orientation 4 - vertical, lamp 1 on left Orientation 1 AA 46 AA 46 3AA-146 Orientation 2 Notes: Consult factory to verify horsepower rating for your particular circuit choice. 1 Custom colors are available. Consult factory. 2 Circuits 30, 31, 58, 69 are not available with rating codes 4, C, D, G or H. 3 Termination 3 only available with rating codes 1, B, and E. 4 Not available with circuits 11-18, 51-57 and 69. S A B C D E F 4 G H J 1 2 Orientation 4 1 Series 3AA-246 Orientation 3 14 ACTUATOR LENS LEGEND 00 No legend this location / no actuator For legend options & codes, visit us at carlingtech.com Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com L-Series Sealed Rocker Switches - Locking - Ordering Scheme | 5 L 11 D 1 S W C J 3 Rating 7 Lamp 1 SERIES L 9 Actuator 10 Lens 11 Lock 0 12 Legend 13 Legend Orientation 6 LOCK W Lock above terminals 10 & 9. 2 CIRCUIT 5 Terminal Orientation ( ) - momentary SP - single pole - uses terminals 1, 2 & 4. DP - double pole uses terminals 5, 6 & 8. Terminals 9, 10 & 11 for lamp circuit only. Position:1 2 SP DP 2 & 4, 6 & 8 Connected Terminals 1121 ONNONE 1424 ONNONE 1626 ONOFF 1727 ON OFF 1828 (ON) OFF CIRCUITS WITH JUMPER TERMINALS 30 2 (2,4&5), (1,6&8) OFF, OFF 31 2 1, 2 & 5 2, 3 & 7 PROGRESSIVE CIRCUITS 51 3 & 4 2, 3 52 3 & 4 2, 3 53 (3 & 4) 2, 3 54 (3 & 4) 2, 3 55 (3 & 4) 2, 3 56 (3 & 4) 2, 3 57 3 & 4 2, 3 58 2 & 4 2, 3 61 3 & 4, 7 & 8 2 & 3, 6 & 7 62 3 & 4, 7 & 8 2 & 3, 6 & 7 63 (3 & 4), (7 & 8) 2 & 3, 6 & 7 64 (3 & 4), (7 & 8) 2 & 3, 6 & 7 65 (3 & 4), (7 & 8) 2 & 3, 6 & 7 66 (3 & 4), (7 & 8) 2 & 3, 6 & 7 67 3 & 4, 7 & 8 2 & 3, 6 & 7 68 2 & 4, 7 & 8 2 & 4, OFF 69 2 & 4, 1, 7 & 8 2 & 4, OFF 70 (2 & 4), (7 & 8) 2 & 4, 5 & 7 71 (2&4), (7 & 8) 2 & 4, 5 & 7 72 2 & 4, 7 & 8 2 & 4, 5 & 7 73 (2 & 4), (7 & 8) 2 & 4, OFF 80 2 & 4, 6 & 8 2 & 4, OFF 3 1 & 2, 5 & 6 OFF ON ON (ON) (ON) (1,2&8), (4,5&6) 2, 4 & 8 1&2 OFF 1&2 (OFF) (1 & 2) (OFF) (OFF) 1&2 1 & 2, 5 & 6 OFF, OFF 1 & 2, 5 & 6 OFF, OFF (1 & 2), (5 & 6) (OFF, OFF) (OFF, OFF) OFF, OFF OFF, OFF (1 & 2), (5 & 7) 1 & 2, 5 & 7 1 & 2, 5 & 7 OFF, OFF OFF, 5 & 6 3 RATING 2 1 .4VA @ 28VDC Resistive 4 10A 250VAC 1/2 HP, 15A 125VAC 1/2 HP, No Listings B 15A 24V C 20A 18V D 20A 12V E 15A 12V G 20A 6V H 20A 3V 4 TERMINATION 4 1 .250 (6.4mm) TAB (QC) 3 .187 (4.7mm) TAB (QC) 7 LAMP Above terminals 12 & 11 No lamp 0 Incandescent 4 3V 5 6V 6 12V LED* Red AmberGreen 2VDC A LF 6VDC B MG 12VDC C NH 24VDC D PJ 7 18V 8 24V * Consult factory for “daylight bright”, blue/green and white LED options. Typical current draw for LED is 20ma. 8 BRACKET COLOR 1 J Black 9 ACTUATOR STYLE AND COLOR 1 BlackRed Locking Rocker PR 10 & 11 LENS STYLE AND COLOR Lens color for LEDs must be clear, white, or match color of LED. 0 - No Actuator Z - No Lens ClearWhite Amber Green Red Blue 1 - B G M T Large Transparent - 7 C H NU Large Translucent 3 - D J PV Bar Transparent - 9 E K RW Bar Translucent 11 LOCK FUNCTION AND COLOR Locking Position Up Down Up & Down Center 3 AH R 1 BJ S 2 CK T 3 DL V 4 EM W 5 Lock Color Match Actuator Black White Red Safety Orange 12 LASER ETCHED, LENS OR BODY LEGEND 00 No legend this location / no actuator For legend options & codes, visit us at carlingtech.com 13 LEGEND ORIENTATION 0 No legend (used with codes 11-18 in selection 12) 1 Orientation 1 - vertical, lamp 1 on top 2 Orientation 2 - horizontal, lamp 1 on right 3 Orientation 3 - vertical, lamp 1 on bottom 4 Orientation 4 - vertical, lamp 1 on left ORIENTATION OF ACTUATOR/LENS IN PANEL ORIENTATION 1 LOCK P LOCK PZAY2-2 LOCK P P LOCK P 5 ILLUMINATION LOCK Lamp #1:above terminals 9 & 10 end of switch.; Lamp #2 above terminals 11 & 12 end of switch. Positive (+) and negative (-) symbols apply to LED lamps only. S B Lamps None # 2 P P Illumination Type Lamp Wired to Terminals Independent 12+ LOCK PZAY2-1 11- Notes: Consult factory to verify horsepower rating for your particular circuit choice. 1 Custom colors are available. Consult factory. 2 Additional lamp circuits available. Consult factory. 3 Available only with 3 position circuits. 4 Termination 3 only available with ratings 1, B and E. 5 Circuits 30, 31, 58 and 69, are not available with rating codes 4, C, D, G or H. Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com ORIENTATION 3 ORIENTATION 2 2 Circuit P M H 00 8 Bracket ORIENTATION 4 1 Series 4 5 6 Termination Illumination Lock 6 | L-Series Sealed Rocker Switches - Dimensional Specifications Dimensional Specifications: in. [mm] L-SERIES L-SERIES SHOWN WITH LASER ETCHED ACTUATOR SHOWN WITH ROCKER GUARD 1.970 [50.04] 1.020 [25.91] .435 [10.16] .400 [10.16] 1.450 [36.83] .855 [21.72] L-SERIES L-SERIES SHOWN WITH LARGE LENS AND PADDLE ACTUATOR SHOWN WITH BAR LENS, LOCK AND CONNECTOR 1.970 [50.04] 1.020 [25.91] .453 [11.51] .400 [10.16] Connector LC1-01 LC2-01 LC3-01 12 4 3 2 1 10 12 4 3 2 1 10 Hole Plug L-SERIES CONNECTOR 2.380 [60.45] L-SERIES HOLE PLUG LH1 BLACK .250 TAB CONNECTOR (PACKARD 630 SERIES) BLACK .187 TAB CONNECTOR (PACKARD 480 SERIES) 1.970 [50.04] BLACK .250 TAB CONNECTOR (AMP ONLY) REMOVABLE HOLE PLUG WITH NON-SERRATED WINGS LH2 HOLE PLUG WITH SERRATED WINGS 1.020 [25.91] .500 [12.70] 1.325 [33.66] .920 [23.37] 1.710 [43.43] .300 [7.62] .790 [20.07] Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com .855 [21.72] L-Series Sealed Rocker Switches - Dimensional Specifications | 7 Dimensional Specifications: in. [mm] +.008 -.000 +.008 -.000 .984 [25.00] 2.020 [51.31] R .093 MAX TYP R .093 MAX TYP MOUNTING PANEL TEST CUT HOLE IN ACTUAL MATERIAL TEST CUT HOLE IN ACTUAL MATERIAL +.008 -.000 1.900 [48.26] FOR ADDITIONAL UNITS, ADD 1.03 [26.2] PER UNIT. FOR MORE THAN 2 L-SERIES SWITCHES, ADD MIDDLE SECTION. AVAILABLE IN PANEL THICKNESSES LISTED BELOW. CONSULT FACTORY +.008 -.000 1.900 [48.26] DIMENSIONS: LME 2.02 [51.3mm] PLUS NUMBER OF CENTER BEZELS (LMM) X 1.034 [26.26mm] LMS MOUNTING PANEL HOLE MOUNTING PANEL THICKNESS .062 [1.57] .093 [2.36] .125 [3.17] .156 [3.96] MOUNTING PANEL OPENING (2) UNITS 2.300 [58.42] 2.300 [58.42] 1.187 [30.15] 1.030 [26.16] LME MOUNTING PANEL END 1.990 [50.55] 2.300 [58.42] 1.340 [34.04] LMM MOUNTING PANEL MIDDLE LMS MOUNTING PANEL 1.700 [43.18] 1.030 [26.16] 1.030 [26.16] .670 [17.02] 2.300 [58.42] 2.300 [58.42] 3.400 [86.36] 4.430 [112.52] LM3 MOUNTING PANEL PANEL OPENING SIZE: 1.90 X 3.06 [48.3mm X 77.7mm] LM4 MOUNTING PANEL PANEL OPENING SIZE: 1.90 X 4.09 [48.3mm X 103.9mm] 1.030 [26.16] .670 [17.02] 2.300 [58.42] 6.490 [164.85] LM6 MOUNTING PANEL PANEL OPENING SIZE: 1.90 X 6.15 [48.3mm X 156.2mm] Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com 8 | L-Series Sealed Rocker Switches - Circuit Diagrams Circuit Diagrams: CIRCUIT CODE CIRCUIT CODE SCHEMATIC CIRCUIT CODE SCHEMATIC 5 4 4 11 22 6 2 4 2 23 52 2 2 6 2 1 13 4 2 1 14 2 6 4 54 2 2 1 4 15 6 4 8 5 26 2 4 1 16 1 2 6 4 6 2 1 18 4 2 1 3 31 2 6 2 21 6 4 3 4 58 2 8 1 8 5 30 4 3 57 2 4 4 8 5 28 1 4 3 8 5 2 17 3 56 2 4 4 1 2 6 4 27 1 2 55 2 1 4 3 8 5 25 1 3 53 2 4 4 1 8 5 24 1 4 3 5 4 4 3 51 2 12 SCHEMATIC 1 4 5 7 2 8 1 3 5 7 2 4 6 8 61 2 Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com L-Series Sealed Rocker Switches - Circuit Diagrams | 9 Circuit Diagrams: CIRCUIT CODE CIRCUIT CODE SCHEMATIC 3 SCHEMATIC 7 1 62 4 5 4 5 8 71 2 4 1 3 6 8 5 7 2 1 7 63 8 72 2 4 6 7 2 8 3 4 7 64 8 73 2 4 1 3 6 7 2 8 5 5 4 7 65 8 80 2 4 6 6 2 8 3 4 7 5 1 8 81 66 2 4 6 6 2 8 3 1 7 67 5 4 8 82 2 4 6 6 3 8 8 4 1 68 2 3 4 7 8 A2 INTERNAL CONNECTION 7 2 6 8 4 1 69 1 4 7 8 A3 INTERNAL CONNECTION 7 2 1 4 2 5 6 8 70 2 7 Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com 10 | L-Series Sealed Rocker Switches - Lamp Circuit Diagrams Lamp Circuit Diagrams: ILLUMIN. CODE ILLUMIN. CODE SCHEMATIC -9 A SCHEMATIC -9 J 1 +1 +4 1 2 +10 -11 B 2 -12 1 INTERNAL CONNECTION +10 +12 -9 C -12 1 2 +10 -9 D 2 2 INTERNAL CONNECTION 1 +10 +12 +4 (–)9 K 1 1 (+)10 -9 E +4 2 1 LEGEND SYMBOL +10 -9 DEFINITION TERMINAL LOCATION +8 LAMP LOCATION F 1 MAINTAINED CIRCUIT 2 MOMENTARY CIRCUIT INTERNAL CONNECTION (JUMPER TERMINAL) +10 -9 +4 2 POSITION CONNECTION G 1 2 P3 P1 2 POSITION +10 -9 P3 H 1 2 P2 P1 3 POSITION +10 Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com Reps & Contact | 11 Authorized Sales Representatives Click on the group name on the map below to find your local representative or visit www.carlingtech.com/findarep. « « Matera W. Canada Matera E. Canada MIDWEST DM Michigan TEMCO Northwest Alaska, Hawaii « NORTHERN Hanna Lind Ltd. Melody Emery Sierra Bridge Marketing Omega Limited Dy-tronix Inc. LD. Allen Norris DM Assoc East Pacent DM Assoc TSI North TSI WEST Signal Enterprises Luscombe Engineering Pinnacle Marketing Matrix DM Mexico South America Mexico « « Sunbelt Components SOUTHEAST ProRep Solutions LATIN AMERICA Americas Europe Middle East Africa Asia-Pacific Oceania About Carling Founded in 1920, Carling Technologies is a leading manufacturer of electrical and electronic switches and assemblies, circuit breakers, electronic controls, power distribution units, and multiplexed power distribution systems. With four ISO registered manufacturing facilities and technical sales offices worldwide, Carling Technologies Sales, Service and Engineering teams do much more than manufacture electrical components, they engineer powerful solutions! To learn more about Carling please visit www.carlingtech.com/company-profile. To view all of Carling’s environmental, quality, health & safety certifications please visit www.carlingtech.com/environmental-certifications Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com Worldwide Headquarters Carling Technologies, Inc. 60 Johnson Avenue, Plainville, CT 06062 Phone: 860.793.9281 Fax: 860.793.9231 Email: [email protected] Northern Region Sales Office: [email protected] Southeast Region Sales Office: [email protected] Midwest Region Sales Office: [email protected] West Region Sales Office: [email protected] Latin America Sales Office: [email protected] Asia-Pacific Headquarters Carling Technologies, Asia-Pacific Ltd., Kowloon, Hong Kong Phone: Int + 852-2737-2277 Fax: Int + 852-2736-9332 Email: [email protected] Shenzhen, China: [email protected] Shanghai, China: [email protected] Pune, India: [email protected] Kaohsiung, Taiwan: [email protected] Yokohama, Japan: [email protected] Europe | Middle East | Africa Headquarters Carling Technologies LTD 4 Airport Business Park, Exeter Airport, Clyst Honiton, Exeter, Devon, EX5 2UL, UK Phone: Int + 44 1392.364422 Fax: Int + 44 1392.364477 Email: [email protected] Germany: [email protected] France: [email protected] www.carlingtech.com REV_06_2016