RT100KP33ART100KP400CA 100 kW TRANSIENT VOLTAGE SUPPRESSOR High-reliability discrete products and engineering services since 1977 FEATURES Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number. Available as non-RoHS (Sn/Pb plating), standard, and as RoHS by adding “-PBF” suffix. MAXIMUM RATINGS Peak pulse power dissipation @ 25°C 100kW @ 6.49/69µs waveform Impulse repetition rate 0.005% tclamping (0 volts to VBR min) < 100 ps theoretical for unidirectional and <5 ns for bidirectional Operating and storage temperatures -65 to +150°C Thermal resistance 17.5C/W junction to lead, or 77.5C/W junction to ambient when mounted on FR4 PC board with 4mm2 copper pads and track width 1mm, length 25mm Steady-state power dissipation 7 Watts @ TL = 27.5°C or 1.61 Watts @ TA = 25°C when mounted on FR4 PC board with 4mm2 copper pads and track width 1mm, length 25mm Forward surge 250 Amps 8.3 ms half-sine wave for unidirectional devices only Solder temperatures 260°C for 10s maximum ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise specified) Part number (1) Rated standoff voltage VWM Volts Maximum clamping @ IPP Maximum reverse leakage @ VWM Maximum peak pulse current (3) @ 6.4/69µs Maximum V(BR) temperature coefficient I(BR) VC ID IPP αV(BR) mA Volts µAmps Amps mV/°C Breakdown voltage V(BR) Volts Min Max (2) RT100KP33A 33 36.7 40.6 50 58.6 5000 1825 38 RT100KP36A 36 40.0 44.2 50 61.8 5000 1672 41 RT100KP40A 40 44.4 49.1 20 68.6 1500 1518 46 RT100KP43A 43 47.8 52.8 10 71.0 500 1432 50 RT100KP45A 45 50.0 55.3 5 73.0 150 1365 52 RT100KP48A 48 53.3 58.9 5 77.7 150 1285 56 RT100KP51A 51 56.7 62.7 5 82.8 50 1205 60 RT100KP54A 54 60.0 66.3 5 87.5 25 1139 63 RT100KP58A 58 64.4 71.2 5 94.0 15 1066 68 RT100KP60A 60 66.7 73.7 5 97.3 15 1012 71 RT100KP64A 64 71.1 78.6 5 104 10 959 76 RT100KP70A 70 77.8 86.0 5 114 10 879 83 RT100KP75A 75 83.3 92.1 5 122 10 819 89 RT100KP78A 78 86.7 95.8 5 126 10 793 93 RT100KP85A 85 94.4 104 5 137 10 726 102 RT100KP90A 90 100 111 5 146 10 686 109 RT100KP100A 100 111 123 5 162 10 619 121 RT100KP110A 110 122 135 5 178 10 559 133 RT100KP120A 120 133 147 5 193 10 519 145 RT100KP130A 130 144 159 5 209 10 473 157 RT100KP150A 150 167 185 5 243 10 413 183 RT100KP160A 160 178 197 5 259 10 386 195 Rev. 20150306 RT100KP33ART100KP400CA 100 kW TRANSIENT VOLTAGE SUPPRESSOR High-reliability discrete products and engineering services since 1977 ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise specified) Part number (1) Rated standoff voltage VWM Volts Maximum clamping @ IPP Maximum reverse leakage @ VWM Maximum peak pulse current (3) @ 6.4/69µs Maximum V(BR) temperature coefficient I(BR) VC ID IPP αV(BR) mA Volts µAmps Amps mV/°C Breakdown voltage V(BR) Volts Min Max (2) RT100KP170A 170 189 209 5 275 10 366 207 RT100KP180A 180 200 221 5 291 10 346 219 RT100KP200A 200 222 245 5 322 10 313 243 RT100KP220A 220 245 271 5 356 10 280 269 RT100KP250A 250 278 308 5 403 10 246 306 RT100KP260A 260 289 320 5 419 10 236 318 RT100KP280A 280 311 345 5 451 10 220 344 RT100KP300A 300 333 369 5 483 10 206 368 RT100KP350A 350 389 431 5 564 10 176 430 RT100KP400A 400 444 492 5 644 10 153 490 1. 2. 3. For bidirectional construction, indicate a CA suffix (instead of A) after the part number. Clamping voltage does not include any variable parasitic lead inductance effects observed during the 6.4µs rise time due to lead length. The maximum peak pulse current (IPP) shown represents the performance capabilities by design. MECHANICAL CHARACTERISTICS Case Digi I Marking Body-painted, alpha-numeric Polarity Cathode band (no band required for bidirectional Rev. 20150306 High-reliability discrete products and engineering services since 1977 RT100KP33ART100KP400CA 100 kW TRANSIENT VOLTAGE SUPPRESSOR Rev. 20150306 High-reliability discrete products and engineering services since 1977 RT100KP33ART100KP400CA 100 kW TRANSIENT VOLTAGE SUPPRESSOR Rev. 20150306