FU6 Surface Mount Glass Passivated Superfast Rectifier Reverse Voltage 800V Forward Current 1A Features • • • • • • Glass passivated superfast recovery Rectifiers Very low profile - typical height of 1.0 mm Low forward voltage drop Low leakage current Moisture sensitivity: level 1, per J-STD-020 High temperature soldering guaranteed: 260℃/10 seconds eSGA (SOD-123FL) Typical Applications For use of general purpose rectification in lighting, cellular phone, portable device, power supplies and other consumer applications. Maximum Ratings (TA = 25 °C unless otherwise noted) Parameter Symbol FU6 Unit Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current VRRM VRMS VDC IF(AV) 800 V 560 V 800 V 1 A Peak forward surge current 8.3 ms single half sinewave superimposed on rated load IFSM 30 A Operating junction and storage temperature range TJ, TSTG - 55 to + 150 °C Electrical Characteristics (TA = 25 °C unless otherwise noted) Parameter Test Conditions Symbol Maximum instantaneous 1A forward voltage Maximum DC reverse current at TA=25℃ rated DC blocking voltage TA=125℃ IF=0.5A,IR=1.0A, Maximum reverse recovery time Irr=0.25A Typical junction capacitance Typical thermal resistance 1) 4.0 V, 1 MHz juntion to ambient juntion to case juntion to lead VF FU6 Unit 2.0 Volts 5.0 IR µA 100 trr 50 nS CJ 8.6 pF RθJA RθJC RθJL 70 35 ℃/W 1 Note:1),The thermal resistance from junction to ambient,case or lead,mounted on P.C.B with 5×5mm copper pads,2 OZ,FR4 PCB www.goodark.com 1/4 2015.11-Rev.A FU6 Surface Mount Glass Passivated Superfast Rectifier Reverse Voltage 800V Forward Current 1A Ratings and Characteristics Curves 30 Peak Forward Surge Current（A） Average Forward Rectified Current, （A） (TA = 25℃ unless otherwise noted) 1.4 1.2 1 0.8 0.6 0.4 0.2 0 0 25 50 75 100 125 150 Lead temperature（℃） 10 1 0.1 0.01 0.001 15 10 5 0 1 10 100 Number of Cycles at 60Hz Tj=25℃ f=1.0MHZ Vsig=50mVp-p 10 1 0.10 0 20 40 60 80 100 120 Percent of Rated Peak Reverse Voltage (%) Figure 3. Typical Reverse Characteristics 1.00 10.00 Reverse Voltage (V) Figure 4. Typical Junction Capacitance 100 Instantaneous Forward Current (A) 8.3ms single half sine wave 100 25℃ 85℃ 125℃ 150℃ Junction Capacitance (pF) Instantaneous Reverse Current (uA) 10000 100 20 Figure 2.Maximum Non-Repetitive Peak Forward Surge Current Figure 1.Forward Current Derating Curve 1000 25 10 1 25℃ 85℃ 0.1 125℃ 150℃ 0.01 0 1 2 3 4 5 6 Instantaneous Forward Voltage (V) Figure 6. Typical Instantaneous Forward Characteristics www.goodark.com 2/4 2015.11-Rev.A FU6 Surface Mount Glass Passivated Superfast Rectifier Reverse Voltage 800V Forward Current 1A Package Outline Dimensions DIM A Unit: mm Unit: inch MIN MAX MIN MAX 0.9 1.08 0.035 0.043 A1 0 0.1 0.000 0.004 B 0.85 1.05 0.033 0.041 C 0.1 0.25 0.004 0.010 D 1.7 2 0.067 0.079 E 2.9 3.1 0.114 0.122 L 0.43 0.83 0.017 0.033 HE 3.5 3.9 0.138 0.154 Soldering footprint Packing Information Packing quantities: 3000 pcs/Reel, 40 Reels/Box; 8mm Tape, 7" Reel Tape & Reel Specification www.goodark.com 3/4 2015.11-Rev.A FU6 Surface Mount Glass Passivated Superfast Rectifier Reverse Voltage 800V Forward Current 1A Disclaimers These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-Ark product best suited to the customer’s application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Suzhou Good-Ark Electronics Co., Ltd.or a third party. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any third-party ’ s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Suzhou GoodArk Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including our website home page. (http://www.goodark.com) When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce in whole or in part these materials. Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2015.11-Rev.A