Part No. QTHA-MTB0-10mm 10 mm tube fitting x male Quick-test, no check-valve, brass Make a bubble-tight connection to any Swagelok, Parker, Hoke, SSP, Tylok or equivalent tube fitting without a wrench Features • An excellent solution for connecting to tube fittings for pressure calibration, gas sampling, pressure reading and testing • A unique design that seals on an o-ring to prevent damage to a tube fitting • Make and remake hundreds of times without over-tightening a tube fitting • Made in USA QTHA-MTB0-10mm Specifications Pressure Range 0 to 5000 psi (0 to 345 bar) End C1 10 mm Tube Fitting End C2 Male Quick-test Has Check Valve No Temperature range 0 to 225 °F (-18 to 107 °C) Construction Brass Seal materials Buna-N Dimensions A 1.5 in (3.81 cm) Dimensions B 0.75 in (1.91 cm) Ralston Instruments Inc. | ralstoninst.com | Toll Free 800-347-6575 | Phone 440-564-1430 | Fax 440-564-1480