INTERSIL CA1558T

CA741, CA741C, CA1458, CA1558,
LM741, LM741C, LM1458
Data Sheet
0.9MHz Single and Dual, High Gain
Operational Amplifiers for Military,
Industrial and Commercial Applications
September 1998
File Number
531.4
Features
• Input Bias Current . . . . . . . . . . . . . . . . . . . . 500nA (Max)
• Input Offset Current . . . . . . . . . . . . . . . . . . . 200nA (Max)
The CA1458, CA1558 (dual types); CA741C, CA741 (single
types); high-gain operational amplifiers for use in military,
industrial, and commercial applications.
These monolithic silicon integrated circuit devices provide
output short circuit protection and latch-free operation.
These types also feature wide common mode and
differential mode signal ranges and have low offset voltage
nulling capability when used with an appropriately valued
potentiometer. A 10kΩ potentiometer is used for offset
nulling types CA741C, CA741 (see Figure 1). Types
CA1458, CA1558 have no specific terminals for offset
nulling. Each type consists of a differential input amplifier
that effectively drives a gain and level shifting stage having
a complementary emitter follower output.
Applications
• Comparator
• Multivibrator
• DC Amplifier
• Summing Amplifier
• Integrator or Differentiator
• Narrow Band or Band Pass Filter
Ordering Information
PART
NUMBER
TEMP. RANGE
(oC)
PACKAGE
PKG. NO.
The manufacturing process make it possible to produce IC
operational amplifiers with low burst “popcorn’’ noise
characteristics.
CA0741E
CA1458E
0 to 70
8 Ld PDIP
E8.3
Technical Data on LM Branded types is identical to the
corresponding CA Branded types.
CA1558E
-55 to 125
8 Ld PDIP
E8.3
CA0741T
-55 to 125
8 Pin Metal Can
T8.C
0 to 70
8 Pin Metal Can
T8.C
CA1558T
-55 to 125
8 Pin Metal Can
T8.C
LM741N
-55 to 125
8 Ld PDIP
E8.3
LM741CN
0 to 70
8 Ld PDIP
E8.3
LM1458N
0 to 70
8 Ld PDIP
E8.3
-55 to 125
8 Ld PDIP
E8.3
0 to 70
8 Ld PDIP
E8.3
CA0741CE
CA0741CT
Pinouts
CA741, CA741C (CAN)
TOP VIEW
CA1558 (METAL CAN)
TOP VIEW
NC
V+
7
-
2
6
+
INV. INPUT
(A)
OUT
OFFSET
NULL
5
3
NON-INV.
INPUT
OUTPUT
(A)
V+
4
1
A
2
1
+
6 INV. INPUT
(B)
5
NON-INV.
INPUT (B)
4
V-
V-
CA741, CA741C, LM741, LM741C (PDIP)
TOP VIEW
OFFSET NULL
B
+
3
NON-INV.
INPUT (A)
OUTPUT
(B)
7
-
1
-
OFFSET
NULL
INV.
INPUT
8
8
8
CA1458, CA1558, LM1458 (PDIP)
TOP VIEW
OUTPUT (A)
NC
1
8
V+
7
OUTPUT (B)
A
INV. INPUT
2
NON-INV. INPUT
3
V-
4
+
1
7
INV. INPUT (A)
V+
2
B
6
OUTPUT
5
OFFSET NULL
NON-INV. INPUT (A)
3
6
INV. INPUT (B)
V-
4
5
NON-INV. INPUT (B)
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999
CA741, CA741C, CA1458, CA1558, LM741, LM741C, LM1458
Absolute Maximum Ratings
Thermal Information
Supply Voltage
CA741C, CA1458, LM741C, LM1458 (Note 1) . . . . . . . . . . . 36V
CA741, CA1558, LM741 (Note 1) . . . . . . . . . . . . . . . . . . . . . 44V
Differential Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30V
Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±VSUPPLY
Offset Terminal to V- Terminal Voltage (CA741C, CA741) . . . . ±0.5V
Output Short Circuit Duration. . . . . . . . . . . . . . . . . . . . . . . Indefinite
Thermal Resistance (Typical, Note 3)
θJA (oC/W) θJC (oC/W)
PDIP Package . . . . . . . . . . . . . . . . . . .
130
N/A
Can Package . . . . . . . . . . . . . . . . . . . .
155
67
Maximum Junction Temperature (Can Package) . . . . . . . . . . 175oC
Maximum Junction Temperature (Plastic Package) . . . . . . . . 150oC
Maximum Storage Temperature Range . . . . . . . . . . -65oC to 150oC
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . 300oC
Operating Conditions
Temperature Range
CA741, CA1558, LM741 . . . . . . . . . . . . . . . . . . . -55oC to 125oC
CA741C, CA1458, LM741C, LM1458 (Note 2) . . . . 0oC to 70oC
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTES:
1. Values apply for each section of the dual amplifiers.
2. All types in any package style can be operated over the temperature range of -55oC to 125oC, although the published limits for certain electrical
specification apply only over the temperature range of 0oC to 70oC.
3. θJA is measured with the component mounted on an evaluation PC board in free air.
Typical Values Intended Only for Design Guidance, VSUPPLY = ±15V
Electrical Specifications
PARAMETER
SYMBOL
Input Capacitance
TEST CONDITIONS
TYPICAL VALUE
(ALL TYPES)
UNITS
1.4
pF
±15
mV
75
Ω
25
mA
0.3
µs
5.0
%
CI
Offset Voltage Adjustment Range
Output Resistance
RO
Output Short Circuit Current
Transient Response
Rise Time
tr
Overshoot
O.S.
Unity Gain, VI = 20mV, RL = 2kΩ,
CL ≤ 100pF
Slew Rate (Closed Loop)
SR
RL ≥ 2kΩ
0.5
V/µs
Gain Bandwidth Product
GBWP
RL = 12kΩ
0.9
MHz
For Equipment Design, VSUPPLY = ±15V
Electrical Specifications
TEST
CONDITIONS
PARAMETER
RS ≤ 10kΩ
Input Offset Voltage
Input Common Mode Voltage Range
RS ≤ 10kΩ
Common Mode Rejection Ratio
RS ≤ 10kΩ
Power Supply Rejection Ratio
Input Resistance
2
(NOTE 4)
CA741, CA1558, LM741
(NOTE 4)
CA741C, CA1458, LM741C,
LM1458
TEMP
(oC)
MIN
TYP
MAX
MIN
TYP
MAX
UNITS
25
-
1
5
-
2
6
mV
Full
-
1
6
-
-
7.5
mV
25
-
-
-
±12
±13
-
V
Full
±12
±13
-
-
-
-
V
25
-
-
-
70
90
-
dB
Full
70
90
-
-
-
-
dB
25
-
-
-
-
30
150
µV/V
Full
-
30
150
-
-
-
µV/V
25
0.3
2
-
0.3
2
-
MΩ
CA741, CA741C, CA1458, CA1558, LM741, LM741C, LM1458
For Equipment Design, VSUPPLY = ±15V (Continued)
Electrical Specifications
TEST
CONDITIONS
PARAMETER
TEMP
(oC)
MIN
TYP
MAX
MIN
TYP
MAX
UNITS
25
-
80
500
-
80
500
nA
Full
-
-
-
-
-
800
nA
-55
-
300
1500
-
-
-
nA
125
-
30
500
-
-
-
nA
25
-
20
200
-
20
200
nA
Full
-
-
-
-
-
300
nA
-55
-
85
500
-
-
-
nA
125
-
7
200
-
-
-
nA
25
50,000
200,000
-
20,000
200,000
-
V/V
Full
25,000
-
-
15,000
-
-
V/V
25
-
-
-
±12
±14
-
V
Full
±12
±14
-
-
-
-
V
25
-
-
-
±10
±13
-
V
Full
±10
±13
-
±10
±13
-
V
25
-
1.7
2.8
-
1.7
2.8
mA
-55
-
2
3.3
-
-
-
mA
125
-
1.5
2.5
-
-
-
mA
25
-
50
85
-
50
85
mW
-55
-
60
100
-
-
-
mW
125
-
45
75
-
-
-
mW
Input Bias Current
Input Offset Current
RL ≥ 2kΩ, VO = ±10V
Large Signal Voltage Gain
RL ≥ 10kΩ
Output Voltage Swing
(NOTE 4)
CA741C, CA1458, LM741C,
LM1458
(NOTE 4)
CA741, CA1558, LM741
RL ≥ 2kΩ
Supply Current
Device Power Dissipation
NOTE:
4. Values apply for each section of the dual amplifiers.
Test Circuits
INVERTING
INPUT
2
-
NON-INVERTING
INPUT
3
+
6
OUTPUT
VOUT
+
5
OFFSET 1
10kΩ
NULL
CL
RL
VIN
V-
FIGURE 1. OFFSET VOLTAGE NULL CIRCUIT FOR CA741C,
CA741, LM741C, AND LM741
3
FIGURE 2. TRANSIENT RESPONSE TEST CIRCUIT FOR ALL
TYPES
CA741, CA741C, CA1458, CA1558, LM741, LM741C, LM1458
Schematic Diagram
(Notes 5, 6)
CA741C, CA741, LM741C, LM741 AND FOR EACH AMPLIFIER OF THE CA1458, CA1558, AND LM1458
D1
OUTPUT
*
V-
*
R7
4.5K
Q13
Q12
Q1
*
R5
39K
Q2
R9
25
Q11
D4
Q3
R8
7.5K
Q4
Q8
R10
50
Q15
Q6
OFFSET
NULL
*
Q10
C1
30pF
NON-INVERTING
INPUT
V+
D2
Q5
INVERTING
INPUT
*
Q16
Q9
Q7
Q14
*
*
Q17
D3
R1
1K
R3
50K
R4
3K
R2
1K
R12
50K
R11
80K
NOTES:
5. See Pinouts for Terminal Numbers of Respective Types.
6. All Resistance Values are in Ohms.
Typical Performance Curves
40
TA = 25oC
RL ≥ 2kΩ
35
15
OUTPUT SWING (VP-P)
COMMON MODE INPUT RANGE (V)
TA = 25oC
10
5
30
25
20
15
10
5
0
0
0
5
10
15
20
DC SUPPLY (V+, V-)
FIGURE 3. COMMON MODE INPUT VOLTAGE RANGE vs SUPPLY
VOLTAGE FOR ALL TYPES
4
0
5
10
15
20
DC SUPPLY (V+, V-)
FIGURE 4. OUTPUT VOLTAGE vs SUPPLY VOLTAGE FOR ALL
TYPES
CA741, CA741C, CA1458, CA1558, LM741, LM741C, LM1458
Typical Performance Curves
(Continued)
30
DC SUPPLY VOLTS (V+ = 15, V- = -15)
TA = 25oC, CL = 100pF
25
OUTPUT (mV)
20
90%
15
20
5
10%
RISE TIME
0
-0.5
0
-0.5
1.0
1.5
TIME (µs)
2.0
2.5
3.0
FIGURE 5. TRANSIENT RESPONSE FOR CA741C AND CA741
Metallization Mask Layout
CA741CH
0
10
20
30
40
50
60 64
57
50
40
30
54 - 62
(1.372 - 1.575)
20
10
0
4 - 10
(0.102 - 0.254)
61 - 69
(1.549 - 1.753)
CA1458H
0
10
20
30
40
50
60
70
80
90
104
100
55
50
40
30
52 - 60
(1.321 - 1.524)
20
10
0
4 - 10
(0.102 - 0.254)
101 - 109
(2.565 - 2.768)
NOTE: Dimensions in parentheses are in millimeters and are derived from the basic inch dimensions as indicated. Grid graduations are in mils (103 inch).
5
CA741, CA741C, CA1458, CA1558, LM741, LM741C, LM1458
All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification.
Intersil semiconductor products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see web site www.intersil.com
Sales Office Headquarters
NORTH AMERICA
Intersil Corporation
P. O. Box 883, Mail Stop 53-204
Melbourne, FL 32902
TEL: (321) 724-7000
FAX: (321) 724-7240
EUROPE
Intersil SA
Mercure Center
100, Rue de la Fusee
1130 Brussels, Belgium
TEL: (32) 2.724.2111
FAX: (32) 2.724.22.05
6
ASIA
Intersil (Taiwan) Ltd.
7F-6, No. 101 Fu Hsing North Road
Taipei, Taiwan
Republic of China
TEL: (886) 2 2716 9310
FAX: (886) 2 2715 3029