Download Data Sheet

Part No.
QTVF-000B-2F-2M
Quick-test Valved Fitting, Brass
Install between a pressure gauge and the
process and isolate the process from the
gauge to perform a calibration of the gauge.
After completing the calibration open the valve
and place the gauge on-line, all without blowing
down the system.
Features
• * Use whenever there is a gauge that needs frequent
calibration or verification
QTVF-000B-2F-2M
Specifications
Pressure Range
0 to 5000 psi (0 to 345 bar)
End C1
1/4" Female NPT
End C2
1/4" Male NPT
Has Block Valve
Yes
Has Vent Valve
No
Temperature range
0 to 130 °F (-18 to 54 °C)
Construction
Brass
Seal materials
Buna-N, Delrin, Teflon
Ralston Instruments Inc. | ralstoninst.com | Toll Free 800-347-6575 | Phone 440-564-1430 | Fax 440-564-1480
Similar pages