NTE5728 Powerblock Thyristor Module Features: D Electrically Isolated Base Plate D Pressure Contact Technology with Increased Power Cycling Capability D Space and Weight Savings Applications: D AC/DC Motor Drives D Various Rectifiers D DC Supply for PWM Inverter Ratings and Characteristics: (TJ = +125°C unless otherwise specified) Maximum Mean On−State Current, IT(AV) (TC = +70°C, 180°, Half Sine Wave, 50Hz, Single Side Cooled) . . . . . . . . . . . . . . . . . . . 250A Maximum RMS On−State Current, IT(RMS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 393A Maximum Repetitive Peak Off−State Voltage (VDSM = 1800V, tp = 10ms), VDRM . . . . . . . . . . 1600V Maximum Repetitive Peak Reverse Voltage (VRSM = 1800V, tp = 10ms), VRRM . . . . . . . . . . . 1600V Maximum Repetitive Peak Current, IDRM, IRRM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30mA Maximum Surge On−State Current (10ms Half Sine Wave, VR = 960V), ITSM . . . . . . . . . . . . . 8.5KA Maximum I2t for Fusing Coordination (10ms Half Sine Wave, VR = 960V), I2t . . . . . . . 360A2s * 103 Maximum Threshold Voltage, VTO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.9V On−State Slope Resistance, rT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.93mΩ Maximum Peak On−State Voltage (ITM = 750A), TJ = +25°C), VTM . . . . . . . . . . . . . . . . . . . . . . 1.73V Critical Rate of Rise of Off−State Voltage (VDM = 1072V), dv/dt . . . . . . . . . . . . . . . . . . . . . . . 800V/μs Critical Rate of Rise of On−State Current, di/dt (ITM = 500A, Gate Source 1.5A, tr ≤ 0.5μs Repetitive) . . . . . . . . . . . . . . . . . . . . . . . . . 100A/μs RMS Isolation Voltage (50Hz, t = 1s Min, IISO = 1mA Max), VISO . . . . . . . . . . . . . . . . . . . . . . . . 3600V Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −40° to +125°C Thermal Resistance, Junction−to−Case (Single Side Cooled), RthJC . . . . . . . . . . . . . . . . . 0.12°C/W Thermal Resistance, Case−to−Sink (Single Side Cooled), RthCS . . . . . . . . . . . . . . . . . . . . . 0.04°C/W Typical Thermal Connection Torque, Fm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.0N • m Typical Mounting Torque, Fm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.0N • m Rev. 1−11 Electrical Specifications: Parameter Symbol Test Conditions Min Typ Max Unit 30 − 180 mA Gate Trigger Current IGT Gate Trigger Voltage VGT 1 − 3 V IH 20 − 150 mA 0.2 − − V Holding Current Non−Trigger Gate Voltage VGD VA = 12V, IA = 1A, TJ = +25°C VDM = 1072V, TJ = +125°C Circuit Diagram G2 K2 + AC − K1 G1 AC M8 x 1.25 Screw (3 Places) + − 1.380 (35.0) K2 G2 G1 K1 1.120 (28.0) .240 (6.0) 1.500 (38.0) 1.970 (50.0) .790 (20.0) .350 (9.0) 3.150 (80.0) .240 (6.0) 4.530 (115.0) 2.010 (51.0) 1.260 (32.0) .390 (10.0) 3.620 (92.0)