ROHM SML013WB

Chip LEDs with Reflector
1208<3.0 2.0 t=1.3mm> High Brightness Type
SML013WB∗∗∗ Series
Emitting Color
White
Material
InGaN on SiC
Package Size(mm)
3020(1208) 3.0×2.0(t=1.3)
Part No.
SML013WBDW
note) "-" will be taken out for emitting color B/E series.
Absolute Maximum Ratings (Ta=25°C)
Dimensions (Unit:mm)
Power Forward Peak Reverse Operating
Storage
Emitting dissipation current forward voltage temperature temperature
current
color
PD
IF
VR
Topr
Tstg
IFP∗
(mW)
(mA)
(V)
(°C)
(°C)
(mA)
0.3
0.5
2.0
1.6
Part No.
1.3 +0.2
-0.1
3.0
2.3
SML013WBDW
:Duty
White
78
100
20
5
-30 to +85
-40 to +100
1/10, 1kHz
Cathode mark
Electrical Optical Characteristics (Ta=25°C)
Forward
voltage
VF
Resin
Reverse
current
IR
Chromaticity
coordinates
Brightness
IV
Typ.
(V)
IF∗1
(mA)
Max.
(µA)
VR
(V)
x
y
IF∗1
(mA)
( mcd)
3.2
20
100
5
0.30
0.30
20
360
SML013WBDW Phosphor
included
Min.
2-R0.3
1.7
Part No.
Typ.
IF∗1
(mcd) (mA)
900
20
Terminal
1.6
1:Pulse width : 30ms
Tolerance:±0.2
Chromaticity Diagram
Directivity (Typ.)
0.4
X-Y
Angular Displacement (deg)
X' - Y'
Valid for both directions
0°
C
CIE y
30°
30°
B
60°
60°
0.3
A
90°
100
50
0
50
90°
100
RELATIVE LUMINOUS INTENSITY (%)
0.2
0.2
0.3
0.4
CIE x
Chromaticity Coordinates (Ta=25˚C, IF=20mA)
A
B
C
x
y
x
y
x
y
0.283
0.244
0.280
0.312
0.330
0.307
0.299
0.269
0.330
0.370
0.354
0.339
0.280
0.312
0.330
0.307
0.363
0.398
0.260
0.272
0.299
0.269
0.330
0.370
Measurement tolerance:±0.01
Recommended Pad Layout
Packaging Specifications (Unit:mm)
Tape Specifications:1 <2,500pcs:reel>
1.45
1.6
Reel Specifications
5.5
3.4
2.4
Tolerance:± 0.2
0 to 0.5
(Unit:mm)
The recommended thickness of the screen mask
for soldering is between 100 and 150µm. The
hole size of the screen mask should be same as
the recommended land pattern or smaller.
φ 180 −30
φ 60 +10
φ 13
8
1.5
φ 1.5 +10
1.45
2± 0.05
3.5± 0.05
1.75± 0.1
Feeding direction
4± 0.1
1.6
Label Position
Tolerance:±0.2
11.4±1
Electrical Characteristic Curves
Forward Current - Forward Voltage
1.6
SML013WBDW
FORWARD CURRENT : IF (mA)
10.0
3.5
1
0.8
0.6
0.4
-30 -20 -10 0 10 20 30 40 50 60 70 80 90 100
4.0
FORWARD VOLTAGE : VF (V)
CASE TEMPERATURE : Tc (°C)
Ta=25°C
Ratio of Maximum Tolerable Peak Current - Pulse Duration
SML013WBDW
1.00
0.10
0.01
0.1
1
10
100
10
Ta=25°C
10kHz
RELATIVE LUMINOUS INTENSITY
10.00
RATIO of MAXIMUM TOLERABLE PEAK CURRENT IF peak Max.
IF Max.
to MAXIMUM TOLERABLE DC CURRENT
Relative Luminous Intensity - Forward Current
5
1
1
100
1000
10000
Forward Current - Chromaticity Diagram
Derating
0.34
30
Ta=25°C
SML013WBDW
0.33
20
0.32
(5mA)
y
MAXIMUM FORWARD CURRENT : IF Max. (mA)
10
PULSE DURATION : Tw (µs)
FORWARD CURRENT : IF (mA)
0.31
(10mA)
10
0.30
0
-30 -20 -10
SML013WBDW
100Hz
3.0
1.2
200Hz
2.5
1.4
1kHz
1.0
2.0
SML013WBDW
IF=20mA
RELATIVE LUMINOUS INTENSITY
Ta=25°C
2kHz
100.0
Relative Luminous Intensity - Case Temperature
0 10 20 30 40 50 60 70 80 90 100
AMBIENT TEMPERATURE : Ta (°C)
0.29
0.28
(20mA)
0.29
0.31
0.30
x
0.32
0.33
SML013WBDW
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level
of reliability and the malfunction of which would directly endanger human life (such as medical
instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers
and other safety devices), please be sure to consult with our sales representative in advance.
It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance
of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow
for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in
order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM
cannot be held responsible for any damages arising from the use of the products under conditions out of the
range of the specifications or due to non-compliance with the NOTES specified in this catalog.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact your nearest sales office.
ROHM Customer Support System
www.rohm.com
Copyright © 2007 ROHM CO.,LTD.
THE AMERICAS / EUPOPE / ASIA / JAPAN
Contact us : [email protected] rohm.co. jp
21, Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan
TEL : +81-75-311-2121
FAX : +81-75-315-0172
Appendix1-Rev2.0