Schottky barrier diode RB060M-30 ●Applications General rectification ●Dimensions (Unit : mm) ●Land size figure 0.1±0.1 0.05 1.2 0.85 1.6±0.1 3.5±0.2 ① 2.6±0.1 3.05 ●Features 1) Small power mold type.(PMDU) 2) Low IR 3) High reliability PMDU ●Construction Silicon epitaxial planar 0.9±0.1 ●Structure 0.8±0.1 ROHM : PMDU JEDEC :SOD-123 Manufacture Date ●Taping dimensions (Unit : mm) ●Absolute maximum ratings (Ta=25°C) Parameter Symbol Limits Forward voltage Reverse current ESD break down voltage www.rohm.com ©2009 ROHM Co., Ltd. All rights reserved. 3.71±0.1 1.5MAX Unit V V A A ℃ ℃ VRM 30 VR 30 2 Io Forward current surge peak (60Hz/1cyc) IFSM 55 Junction temperature 150 Tj Storage temperature -55 to +150 Tstg (*1)Tc=65℃ MAX. Mounted on epoxy board. 180°Half sine wave Reverse voltage (repetitive peak) Reverse voltage (DC) Average rectified forward current ●Electrical characteristic (Ta=25°C) Parameter Symbol φ1.0±0.1 8.0±0.2 φ1.55±0.05 4.0±0.1 1.81±0.1 0.25±0.05 1.75±0.1 2.0±0.05 3.5±0.05 4.0±0.1 Conditions Min. Typ. Max. Unit VF1 0.32 0.4 0.45 V IF=1.0A VF2 0.36 0.44 0.49 V IF=2.0A IR - 10 50 µA VR=30V ESD 7 - - kV C=200pF , R=0Ω forward and reverse : 1 time 1/3 2009.02 - Rev.C RB060M-30 10 f=1MHz Ta=150℃ Ta=25℃ 0.1 Ta=-25℃ 0.01 10000 Ta=75℃ 1000 100 Ta=25℃ 10 1 Ta=-25℃ 0.1 0 100 200 300 400 500 600 10 0 FORWARD VOLTAGE：VF(mV) VF-IF CHARACTERISTICS 5 10 15 20 25 30 0 440 AVE:449.1mV 430 90 80 70 60 50 40 30 20 AVE:7.26uA 360 340 330 320 310 300 Ct DISPERSION MAP 100 150 AVE:68.2 100 50 0 Ta=25℃ IF=0.5A IR=1A Irr=0.25*IR n=10pcs 25 20 15 10 5 AVE:9.8ns PEAK SURGE FORWARD CURRENT:IFSM(A) RESERVE RECOVERY TIME:trr(ns) 1cyc 8.3ms 200 AVE:374.4pF IR DISPERSION MAP Ifsm 90 Ifsm 80 8.3m 8.3m 1cyc 70 60 50 40 30 20 10 0 0 1 trr DISPERSION MAP IFSM DISPERSION MAP 10 NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS 100 Mounted on epoxy board Ifsm t 150 100 50 0 1 10 TIME:t(ms) IFSM-t CHARACTERISTICS www.rohm.com ©2009 ROHM Co., Ltd. All rights reserved. 100 1000 3 IM=10mA IF=0.5A Rth(j-a) 100 D=1/2 1ms tim 300us Rth(j-c) 10 1 0.1 0.001 0.1 10 TIME:t(s) Rth-t CHARACTERISTICS 2/3 1000 FORWARD POWER DISSIPATION:Pf(W) TRANSIENT THAERMAL IMPEDANCE:Rth (℃/W) 200 PEAK SURGE FORWARD CURRENT:IFSM(A) 30 350 30 250 25 Ta=25℃ f=1MHz VR=0V n=10pcs 370 0 VF DISPERSION MAP 300 20 380 10 420 15 390 Ta=25℃ VR=30V n=30pcs CAPACITANCE BETWEEN TERMINALS:Ct(pF) REVERSE CURRENT:IR(uA) 450 10 400 100 Ta=25℃ IF=2A n=30pcs 460 5 REVERSE VOLTAGE:VR(V) VR-Ct CHARACTERISTICS REVERSE VOLTAGE：VR(V) VR-IR CHARACTERISTICS 470 FORWARD VOLTAGE:VF(mV) 100 0.01 0.001 PEAK SURGE FORWARD CURRENT:IFSM(A) CAPACITANCE BETWEEN TERMINALS:Ct(pF) Ta=125℃ 1 1000 100000 REVERSE CURRENT:IR(uA) FORWARD CURRENT:IF(A) Ta=150℃ Ta=125℃ 1000000 Ta=75℃ Data Sheet DC 2 Sin(θ＝180) 1 0 0 1 2 3 4 5 AVERAGE RECTIFIED FORWARD CURRENT：Io(A) Io-Pf CHARACTERISTICS 2009.02 - Rev.C RB060M-30 5 4 3 DC D=1/2 2 Sin(θ＝180) 1 0 Io 0A 0V 4 VR t DC 3 T D=t/T VR=15V Tj=150℃ D=1/2 2 1 Sin(θ＝180) 0 0 10 20 30 REVERSE VOLTAGE:VR(V) VR-PR CHARACTERISTICS Io 0A 0V 5 t AVERAGE RECTIFIED FORWARD CURRENT:Io(A) AVERAGE RECTIFIED FORWARD CURRENT:Io(A) 5 REVERSE POWER DISSIPATION:PR (W) Data Sheet 4 DC T VR D=t/T VR=15V Tj=150℃ 3 D=1/2 2 Sin(θ＝180) 1 0 0 25 50 75 100 125 AMBIENT TEMPERATURE:Ta(℃) Derating Curve (Io-Ta) 150 0 25 50 75 100 125 CASE TEMPARATURE:Tc(℃) Derating Curve (Io-Tc) 150 ELECTROSTATIC DISCHARGE TEST ESD(KV) 30 No break at 30kV 25 20 15 10 AVE:13.2kV 5 0 C=200pF R=0Ω C=100pF R=1.5kΩ ESD DISPERSION MAP www.rohm.com ©2009 ROHM Co., Ltd. All rights reserved. 2/3 2009.02 - Rev.C Appendix Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM CO.,LTD. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright © 2009 ROHM Co.,Ltd. THE AMERICAS / EUROPE / ASIA / JAPAN Contact us : webmaster @ rohm.co. jp 21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix-Rev4.0